Adsorption is one of the most successful physicochemical approaches for removing heavy metal contaminants from polluted water. The use of residual biomass for the production of adsorbents has attracted a lot of attention due to its cheap price and environmentally friendly approach. The transformation of Sargassum—an invasive brown macroalga—into activated carbon (AC) via phosphoric acid thermochemical activation was explored in an effort to increase the value of Sargassum seaweed biomass. Several techniques (nitrogen adsorption, pHPZC, Boehm titration, FTIR and XPS) were used to characterize the physicochemical properties of the activated carbons. The SAC600 3/1 was predominantly microporous and mesoporous (39.6% and 60.4%, respectively) and revealed a high specific surface area (1695 m2·g−1). To serve as a comparison element, a commercial reference activated carbon with a large specific surface area (1900 m2·g−1) was also investigated. The influence of several parameters on the adsorption capacity of AC was studied: solution pH, solution temperature, contact time and Cr(VI) concentration. The best adsorption capacities were found at very acid (pH 2) solution pH and at lower temperatures. The adsorption kinetics of SAC600 3/1 fitted well a pseudo-second-order type 1 model and the adsorption isotherm was better described by a Jovanovic-Freundlich isotherm model. Molecular dynamics (MD) simulations confirmed the experimental results and determined that hydroxyl and carboxylate groups are the most influential functional groups in the adsorption process of chromium anions. MD simulations also showed that the addition of MgCl2 to the activated carbon surface before adsorption experiments, slightly increases the adsorption of HCrO4− and CrO42− anions. Finally, this theoretical study was experimentally validated obtaining an increase of 5.6% in chromium uptake.
21 October 2022 in Environmental Technology & Innovation
Since 2011, substantial amounts of pelagic Sargassum algae have washed up along the Caribbean beaches and the Gulf of Mexico, leading to negative impacts on the economy and the environment of those areas. Hence, it is now crucial to develop strategies to mitigate this problem while valorizing such invasive biomass. This work deals with the successful exploitation of this pelagic Sargassum seaweed for the fabrication of carbon materials that can be used as electrodes for supercapacitors. Pelagic Sargassum precursors were simply pyrolyzed at temperatures varying from 600 to 900 °C. The resultant carbonaceous materials were then extensively characterized using different techniques, such as nitrogen adsorption for textural characterization, as well as X-ray photoelectron (XPS), Fourier transform infrared spectroscopies (FT-IR) and scanning electron microscopy (SEM), to understand their structures and functionalities. The electrochemical properties of the carbon materials were also tested for their performance as supercapacitors using cyclic voltammetry (CV), the galvanostatic method and electrochemical impedance spectroscopy analyses (EIS). We managed to have a large specific surface, i.e., 1664 m2 g−1 for biochar prepared at 800 °C (CS800). Eventually, CS800 turned out to exhibit the highest capacitance (96 F g−1) over the four samples, along with the highest specific surface (1664 m2 g−1), with specific resistance of about 0.07 Ω g −1.
Cette étude a été réalisée afin de déterminer les conditions optimales de synthèse decharbons actifs (CAs) dérivés de Sargassum (sp) qui constitue une algue invasive et dela coque de galba (Galaba calophilum L.) generée après l’extraction de l’huile cosmétique.Les charbons actifs sont utilisés pour une adsorption efficace des résidus polluants telsque la caféine (Caf), la tétracycline (Tc), la pénicilline (Pen), l’érythromycine (Ery) etle bleu de méthylène (BM). La préparation des CAs a été effectuée en suivant un pland’optimisation de Doehlert à trois facteurs et deux niveaux (la température de pyrolyse, lerapport de masse entre l’agent activant et le précurseur et le temps de pyrolyse) suivis dela méthodologie de surface de réponse. Ensuite les CAs donnant les adsorptions optimalessont utilisés pour préparer un support catalytique à base d’oxyde de fer par différentesméthodes d’imprégnation. L’étude de l’effet catalytique des charbons magnétiques (CAM)a été réalisée pour la dégradation de l’acide para chlorobenzoïque (pCBA) et la stabilitédes matériaux après plusieurs cycles d’utilisation a été testée. La dégradation des antiobiotiques après saturation des CAM sous ozone a été évaluée.Les CAs obtenus ont été caractérisés en utilisant différentes techniques, l’analyse thermogravimétrique, la chimie de surface à savoir le pHpzc et l’acidité/basicité des groupesde surfaces par la méthode de Boehm, la spectroscopie de photoélectron X, l’infrarougeà transformée de Fourier et la diffraction des rayons X, les propriétés texturales ont étédéterminées par la mesure de l’adsorption/désorption d’azote, la microscopie éléctroniqueà balayage.Les capacités d’adsorption ont atteint des valeurs de 329, 579, 150 et 223 mg g-1 sur le CAoptimisé à base de sargasse et de 384, 607, 249, 314 mg g-1 sur le CA optimisé à base degalba pour Caf, Tc, Pen et BM, respectivement. Les mesures d’adsorption sur les CAMont permis de sélectionner les meilleurs matériaux pour tester les procédés d’oxydation.Il est démontré que le processus d’oxydation avancée utilisant l’ozonation couplée avecles CAs comme support catalytique est efficace pour l’élimination des polluants avec unpourcentage d’élimination supérieur à 96 % pour l’Ery, et supérieur à 99 % pour la Penet la Tc. Ces études ont montré une très grande stabilité de certains CAM même aprèsplusieurs cycles d’utilisation à la fois pour l’adsorption et la dégradation des polluants.