Connaissance et Valorisation: Chimie des Matériaux, Environnement, Energie (COVACHIM-M2E), EA 3592, Faculté des Sciences Exactes et Naturelles, Université des Antilles, 97159 Pointe-à-Pitre Cedex, France
Auto-generated profile, based on publicly available information
Christelle Yacou
Connaissance et Valorisation: Chimie des Matériaux, Environnement, Energie (COVACHIM-M2E), EA 3592, Faculté des Sciences Exactes et Naturelles, Université des Antilles, 97159 Pointe-à-Pitre Cedex, France
Adsorption is one of the most successful physicochemical approaches for removing heavy metal contaminants from polluted water. The use of residual biomass for the production of adsorbents has attracted a lot of attention due to its cheap price and environmentally friendly approach. The transformation of Sargassum—an invasive brown macroalga—into activated carbon (AC) via phosphoric acid thermochemical activation was explored in an effort to increase the value of Sargassum seaweed biomass. Several techniques (nitrogen adsorption, pHPZC, Boehm titration, FTIR and XPS) were used to characterize the physicochemical properties of the activated carbons. The SAC600 3/1 was predominantly microporous and mesoporous (39.6% and 60.4%, respectively) and revealed a high specific surface area (1695 m2·g−1). To serve as a comparison element, a commercial reference activated carbon with a large specific surface area (1900 m2·g−1) was also investigated. The influence of several parameters on the adsorption capacity of AC was studied: solution pH, solution temperature, contact time and Cr(VI) concentration. The best adsorption capacities were found at very acid (pH 2) solution pH and at lower temperatures. The adsorption kinetics of SAC600 3/1 fitted well a pseudo-second-order type 1 model and the adsorption isotherm was better described by a Jovanovic-Freundlich isotherm model. Molecular dynamics (MD) simulations confirmed the experimental results and determined that hydroxyl and carboxylate groups are the most influential functional groups in the adsorption process of chromium anions. MD simulations also showed that the addition of MgCl2 to the activated carbon surface before adsorption experiments, slightly increases the adsorption of HCrO4− and CrO42− anions. Finally, this theoretical study was experimentally validated obtaining an increase of 5.6% in chromium uptake.
Since 2011, substantial amounts of pelagic Sargassum algae have washed up along the Caribbean beaches and the Gulf of Mexico, leading to negative impacts on the economy and the environment of those areas. Hence, it is now crucial to develop strategies to mitigate this problem while valorizing such invasive biomass. This work deals with the successful exploitation of this pelagic Sargassum seaweed for the fabrication of carbon materials that can be used as electrodes for supercapacitors. Pelagic Sargassum precursors were simply pyrolyzed at temperatures varying from 600 to 900 °C. The resultant carbonaceous materials were then extensively characterized using different techniques, such as nitrogen adsorption for textural characterization, as well as X-ray photoelectron (XPS), Fourier transform infrared spectroscopies (FT-IR) and scanning electron microscopy (SEM), to understand their structures and functionalities. The electrochemical properties of the carbon materials were also tested for their performance as supercapacitors using cyclic voltammetry (CV), the galvanostatic method and electrochemical impedance spectroscopy analyses (EIS). We managed to have a large specific surface, i.e., 1664 m2 g−1 for biochar prepared at 800 °C (CS800). Eventually, CS800 turned out to exhibit the highest capacitance (96 F g−1) over the four samples, along with the highest specific surface (1664 m2 g−1), with specific resistance of about 0.07 Ω g −1.
Activated carbons are commonly used for adsorption/depollution applications, but only a few studies are related to their lubricating properties. In order to investigate a new family of friction reducers, the tribological properties of biochars and derived activated carbons obtained from sugar cane bagasse are investigated. Activated carbons are obtained from either a physical (steam water) or chemical (with phosphoric acid) activation process. The tribological tests show that the activated carbons present very low friction coefficients, close to 0.08. The correlation of textural and tribological investigations shows that the specific surface area of the compounds as well as the microporous and mesoporous domain extensions are key parameters to optimize the friction reduction properties of activated carbons. The friction properties of the compounds are improved if the mesoporous domain extension is above 40% of the total porous volume. This study shows that local biomass waste valorization is possible and that sugar cane bagasse-derived activated carbons appear as interesting new friction reduction additives for lubricants.
Sargassum is a genus of brown algae that causes a major impact to marine ecosystems. Although accumulation of this invasive seaweed is considered an environmental problem, Sargassum can also be resource of valuable molecules such as alginates. Alginates are polysaccharides extracted from the cell walls of brown seaweeds with multiple applications in food, cosmetics, pharmaceuticals, and biotechnology. In this study, we explored four different extraction protocols to isolate alginates from Sargassum from the archipelago of Guadeloupe. H-NMR, FTIR, and SEM were carried out to characterize isolated samples and describe their chemical and morphological properties. Antioxidant capacity of the isolated alginates was tested in the sample. FRAP assay showed free radical scavenging activity, and cell viability assay showed that alginates keep protective capacity against oxidative stress in cell cultures. In sum, the isolation methods used in this study are effective extractive methods to obtain alginates from Sargassum, which highlight this seaweed as a potential source of bioactive compounds that may be exploited for industrial and biomedical purposes.