Stavros Kiape

Mr. Stavros Kiape


Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 March 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
VSVassiliki Sokoli
Vassiliki Sokoli
SKSPYROS KAMNIS
SPYROS KAMNIS
KDKonstantinos Delibasis
Konstantinos Delibasis
EGEmmanuel Georgatis
Emmanuel Georgatis
SKStavros Kiape
Stavros Kiape
AKAlexander E. Karantzalis
Alexander E. Karantzalis
In the present study, a thorough examination of nanoindentation-based mechanical properties of a refractory MoTaNbVW high-entropy alloy (RHEA) was conducted. Basic mechanical properties, such as the indentation modulus of elasticity, indentation hardness, and indentation-absorbed elastic energy, were assessed by means of different input testing variables, such as the loading speed and indentation depth. The obtained results were discussed in terms of the elasto-plastic behavior of the affected material by the indentation process and material volume. Detailed analysis of the RHEA alloy’s nanoindentation creep behavior was also assessed. The effect of testing parameters such as preset indentation depth, loading speed, and holding—at the creep stage—time were selected for their impact. The results were explained in terms of the availability of mobile dislocations to accommodate creep deformation. Crucial parameters, such as maximum shear stress developed during testing (τmax), critical volume for dislocation nucleation (Vcr), and creep deformation stress exponent n, were taken into consideration to explain the observed behavior. Additionally, in all cases of mechanical property examination and in order to identify those input testing parameters—in case—that have the most severe effect, an extensive statistical analysis was conducted using four different methods, namely ANOVA, correlation matrix analysis, Random Forest analysis, and Partial Dependence Plots. It was observed that in most of the cases, the statistical treatment of the obtained testing data was in agreement with the microstructural and metallurgical observations and postulates.

Verified
Journal Article
Open access
PDF file
SKStavros Kiape
Stavros Kiape
MGMaria Glava
Maria Glava
EGEmmanuel Georgatis
Emmanuel Georgatis
SKSPYROS KAMNIS
SPYROS KAMNIS
Theodore MatikasTheodore Matikas
Theodore Matikas
AKAlexander E. Karantzalis
Alexander E. Karantzalis
High entropy alloys (HEAs) have emerged as a frontier in surface engineering, challenging the status quo of traditional alloy systems with their exceptional mechanical properties and corrosion resistance. This study investigates the CoCrFeMnNi0.8V HEA, both as a standalone alloy and in a composite with WC-Co, to evaluate their potential as innovative surface coatings. The CoCrFeMnNi0.8V alloy, enriched with vanadium, demonstrates a unique microstructure with enhanced hardness and wear resistance, while the addition of WC-Co particles contributes to improved toughness and durability. By employing High Velocity Oxy-Fuel (HVOF) thermal spray techniques, coatings are deposited onto steel substrates and subjected to rigorous microstructural characterization, wear, and corrosion resistance testing. The results reveal that the CoCrFeMnNi0.8V coating exhibits impressive corrosion resistance in chloride-rich environments. The composite coating leverages the synergy between the HEA’s inherent corrosion resistance and WC-Co’s wear resistance, striking a balance that suits demanding applications. With optimized processing conditions, the composite WC-Co-reinforced high entropy alloy coating could offer a significant advancement in protective coatings technology, especially for maritime and other corrosive settings. This work not only underscores the versatility of HEAs in surface engineering applications but also opens avenues for the development of new material mixtures.

28 March 2024 in Coatings
Verified
Journal Article
Open access
PDF file
SKStavros Kiape
Stavros Kiape
MGMaria Glava
Maria Glava
EGEmmanuel Georgatis
Emmanuel Georgatis
SKSPYROS KAMNIS
SPYROS KAMNIS
Theodore MatikasTheodore Matikas
Theodore Matikas
AKAlexander E. Karantzalis
Alexander E. Karantzalis
High-entropy alloys (HEAs) are revolutionizing the field of surface engineering, challenging traditional alloy frameworks with their superior mechanical attributes and resistance to corrosion. This investigation delves into the properties of the CoCrFeMnNi0.8V HEAs, both as a standalone material and when blended with Cr3C2-Ni20Cr, to evaluate their efficacy as cutting-edge surface treatments. The addition of vanadium to the CoCrFeMnNi0.8V alloy results in a distinctive microstructure that improves hardness and resistance to abrasion. The incorporation of Cr3C2-Ni20Cr particles enhances the alloy’s toughness and longevity. Employing high-velocity oxy-fuel (HVOF) thermal spray methods, these coatings are deposited onto steel substrates and undergo detailed evaluations of their microstructural characteristics, abrasion, and corrosion resistance. Findings reveal the CoCrFeMnNi0.8V coating’s exceptional ability to withstand corrosion, especially in environments rich in chlorides. The hybrid coating benefits from the combination of the HEA’s inherent corrosion resistance and the enhanced wear and corrosion resistance provided by Cr3C2-Ni20Cr, delivering comprehensive performance for high-stress applications. Through the fine-tuning of the application process, the Cr3C2-Ni20Cr reinforced high-entropy alloy coating emerges as a significant advancement in protective surface technology, particularly for use in marine and corrosive settings. This study not only highlights the adaptability of HEAs in surface engineering but also prompts further investigation into innovative material pairings.

30 May 2026 in Alloys
Verified
Journal Article
Open access
PDF file
EGEmmanuel Georgatis
Emmanuel Georgatis
APAnthoula Poulia
Anthoula Poulia
SKStavros Kiape
Stavros Kiape
ALAikaterini Lefa
Aikaterini Lefa
CPChristina Prosili
Christina Prosili
AKAlexander E. Karantzalis
Alexander E. Karantzalis
This study investigates the microstructural evolution of the CoCrFeNi system after incorporating Gallium (Ga) at varying concentrations (0, 15, and 20 at.%). The systems were synthesized by Vacuum Arc Melting (VAM) and characterized through X-ray Diffraction diffraction (XRD) and Scanning Electron Microscopy (SEM/EDS). Findings showed that the CoCrFeNi medium medium-entropy alloy stabilizes in a single-phase Face-Centered Cubic (FCC) structure. Upon the addition of 15 at.% Ga a dendritic morphology with a transition towards a duplex FCC + BCC microstructure was induced, a trend which was further solified in the equiatomic FeCoNiCrGa system. In this case the proportion of the Ga-rich BCC phase was increased from 18–22% to 31–34% for the Ga15 and Ga20 systems respectively. A combined approach of Electrochemical Frequency Modulation (EFM), Cyclic Potentiodynamic Polarization (CPP), and Electrochemical Impedance Spectroscopy (EIS) was selected for studying the electrochemical corrosion behavior of the produced systems. EFM results indicated a progressive deterioration of corrosion resistance when increasing Ga concentration (Icorr: 4.142, 5.619 and 10.01 μA/cm2, and Rp: 12,035, 10,736 and 7254 Ω for the Ga0, Ga15 and Ga20 alloys respectively). Surface inhomogeneity, rapid passivation, and diffusion-controlled processes caused deviations from the ideal causality factors’ values. CPP measurements revealed increasing corrosion current densities with Ga addition within the Tafel region (2.81 × 10−7, 3.72 × 10−7 and 5.11 × 10−7A/cm2 for the Ga0, Ga15 and Ga20 alloys respectively). All alloys showed positive hysteresis loops and an absence of repassivation, indicating susceptibility to pitting corrosion. Nevertheless, detailed analysis of the forward polarization region highlighted a more complex aspect. Reverse polarization scans confirmed stable pit growth in all alloys, with the absence of a repassivation tendency. EIS tests, performed after the completion of CPP measurements, further clarified the corrosion mechanisms. Equivalent circuit modeling revealed that although Ga-containing alloys exhibited relatively improved film characteristics in the forward polarization stage, the charge transfer resistance (Rct) was highest for the CoCrFeNi alloy, followed by Ga15 and Ga20 (22,620, 11,380, 10,060 Ω respectively). The overall impedance ranking (Ga0 > Ga15 > Ga20, i.e., 27,139 > 20,279.5 > 16,341 ohms respectively) showed that, despite microstructural and entropic effects enhancing certain passivation aspects, the reduced Cr content highly impacted long-term corrosion resistance. This holistic electrochemical approach showcases the complex interactions between compositional alterations, phase structure, grain refinement, passive film chemistry, and diffusion trends in establishing the corrosion performance of Ga-modified CoCrFeNi HEAs.

23 July 2026 in Coatings
Verified
Journal Article
Open access
PDF file
SKStavros Kiape
Stavros Kiape
APAnthoula Poulia
Anthoula Poulia
DNDimitrios Nousias
Dimitrios Nousias
EGEmmanuel Georgatis
Emmanuel Georgatis
SKSpyros Kamnis
Spyros Kamnis
AKAlexander E. Karantzalis
Alexander E. Karantzalis
This study investigates the design, microstructure, and performance profile of a novel composite coating combining a high-entropy alloy (HEA) matrix with cermet reinforcement. A 50wt.%CoCrFeMnNi0.8V–50wt.% Cr3C2-Ni80Cr20 powder mixture was successfully deposited onto steel substrates via high-velocity oxy-fuel (HVOF) thermal spraying. Microstructural analysis revealed a highly dense, well-bonded coating architecture (450–500 μm thick) where partially melted, spherical HEA splats were uniformly surrounded by the Cr3C2-Ni80Cr20 phase. X-ray diffraction confirmed a complex multiphase evolution consisting of FCC, BCC, and σ-NiCr phases driven by the rapid solidification inherent to the HVOF process. Tribological evaluations via ball-on-disc testing demonstrated that incorporating the Cr3C2-Ni80Cr20 reinforcement significantly improves wear resistance compared to the monolithic HEA coating. The composite’s wear behavior is governed by a synergistic mechanism: the ductile HEA matrix accommodates plastic deformation, while the harder carbide particles enhance load-bearing capacity, transitioning from adhesive wear to mild third-body abrasion and protective tribo-oxidation. Conversely, electrochemical testing in a 3.5 wt.% NaCl solution showed that the composite coating exhibits higher corrosion current densities (10.53 × 10−6 A/cm2) and more active corrosion potentials than the pure HEA matrix. This behavior is attributed to localized micro-galvanic cells forming at the heterogeneous interfaces between the different phases, alongside chloride-induced destabilization of the surface oxide film. Overall, the novel composite coating offers a compelling, sustainable alternative for surface engineering applications requiring a balanced trade-off between mechanical toughness and acceptable environmental durability. This behavior is also verified by the comparison with previous results dealing with monolithic CoCrFeMnNi0.8V and 75wt.%CoCrFeMnNi0.8V–25wt.% Cr3C2-Ni80Cr20 thermal sprayed coatings, where it is evident that the increase of the reinforcing phase leads to an optimum combination of properties.

27 January 2026 in Crystals
Verified
Journal Article
Open access
PDF file
APAnthoula Poulia
Anthoula Poulia
MZMaria-Nikoleta Zygogianni
Maria-Nikoleta Zygogianni
CMChristina Mathiou
Christina Mathiou
EGEmmanuel Georgatis
Emmanuel Georgatis
SKStavros Kiape
Stavros Kiape
AKAlexander E. Karantzalis
Alexander E. Karantzalis
This work investigates the synthesis, thermodynamic phase stability and microstructural, mechanical and tribological behavior of the CrFeMoV alloy system and its Al-modified derivatives, CrFeMoV-Al2 and CrFeMoV-Al6, which belong to the family of high- and medium-entropy alloys. The studied systems were produced via Vacuum Arc Melting (VAM), followed by a comprehensive characterization. Thermodynamic and geometric phase-formation models were employed to predict the formation of BCC/Β2 solid solutions and the potential emergence of σ-type intermetallic compounds. An ML model was also employed to further predict elemental interactions and phase evolution. These predictions were experimentally confirmed via X-ray diffraction analysis, which verified the presence of a BCC matrix in all compositions, the presence of σ-phase precipitates whose volume fraction systematically reduced with Al inclusion and the gradual increase in the B2 phase with the increase in the Al content. Scanning electron microscopy and EDX analyses uncovered noticeable dendritic segregation, with Mo and Fe enrichment in dendrite cores and in interdendritic regions, respectively. Cr, V, and Al were more uniformly distributed. Mechanical property data derived by micro hardness testing demonstrated a high hardness of 816 HV for the base alloy, ascribed to σ-phase strengthening, followed by a progressive reduction in this value to 802 HV and 756 HV in Al-containing alloys due to the attenuation of σ-phase formation and the gradual increase in the B2 phase. Dry sliding wear results unveiled a positive correlation between wear resistance and hardness, confirming the beneficial role of intermetallic strengthening. Finally, nanoindentation tests shed light on the nanoscale mechanical response, confirming the trends observed at the microscale. Overall, the combination of thermodynamic modeling and experimental analysis provide a robust framework for understanding phase stability, microstructural evolution, and mechanical performance in Al-alloyed CrFeMoV high-entropy systems, while highlighting the potential of controlled Al additions to tailor microstructure and properties.