SPYROS KAMNIS

Dr. SPYROS KAMNIS


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 June 2022 in Metals
Verified
Journal Article
Open access
PDF file
Athanasios SfikasAthanasios Sfikas
Athanasios Sfikas
Sergio Gonzalez SanchezSergio Gonzalez Sanchez
Sergio Gonzalez Sanchez
Angeliki G. LekatouAngeliki G. Lekatou
Angeliki G. Lekatou
SKSPYROS KAMNIS
SPYROS KAMNIS
AKAlexander E. Karantzalis
Alexander E. Karantzalis
Al-Co alloys is an emerging category of metallic materials with promising properties and potential application in various demanding environments. Over the years, different manufacturing techniques have been employed to fabricate Al-Co alloys, spanning from conventional casting to rapid solidification techniques, such as melt spinning, thus leading to a variety of different microstructural features. The effect of the fabrication method on the microstructure is crucial, affecting the morphology and volume of the precipitates, the formation of supersaturated solid solutions and the development of amorphous phases. In addition, the alloy composition has an effect on the type and volume fraction of intermetallic phases formed. As a result, alloy properties are largely affected by the microstructural outcomes. This review focuses on highlighting the effect of the fabrication techniques and composition on the microstructure and properties of Al-Co alloys. Another goal is to highlight areas in the field that are not well understood. The advantages and limitations of this less common category of Al alloys are being discussed with the scope of future prospects and potential applications.

28 May 2023 in Coatings
Verified
Journal Article
Open access
PDF file
Athanasios SfikasAthanasios Sfikas
Athanasios Sfikas
SKSPYROS KAMNIS
SPYROS KAMNIS
MTMartin Tse
Martin Tse
Katerina ChristofidouKaterina Christofidou
Katerina Christofidou
Sergio Gonzalez SanchezSergio Gonzalez Sanchez
Sergio Gonzalez Sanchez
EGEmmanuel Georgatis
Emmanuel Georgatis
The aim of this work is to improve the understanding of the effect of the cooling rate on the microstructure of high-entropy alloys, with a focus on high-entropy alloy coatings, by using a combined computational and experimental validation approach. CoCrFeMnNi0.8V coatings were deposited on a steel substrate with high velocity oxy-air-fuel spray with the employment of three different deposition temperatures. The microstructures of the coatings were studied and compared with the microstructure of the equivalent bulk high-entropy alloy fabricated by suction casting and powder fabricated by gas atomization. According to the results, the powder and the coatings deposited by low and medium temperatures consisted of a BCC microstructure. On the other hand, the microstructure of the coating deposited by high temperature was more complex, consisting of different phases, including BCC, FCC and oxides. The phase constitution of the bulk high-entropy alloy included an FCC phase and sigma. This variation in the microstructural outcome was assessed in terms of solidification rate, and the results were compared with Thermo-Calc modelling. The microstructure can be tuned by the employment of rapid solidification techniques such as gas atomization, as well as subsequent processing such as high velocity oxy-air-fuel spray with the use of different spray parameters, leading to a variety of microstructural outcomes. This approach is of high interest for the field of high-entropy alloy coatings.

25 March 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
VSVassiliki Sokoli
Vassiliki Sokoli
SKSPYROS KAMNIS
SPYROS KAMNIS
KDKonstantinos Delibasis
Konstantinos Delibasis
EGEmmanuel Georgatis
Emmanuel Georgatis
SKStavros Kiape
Stavros Kiape
AKAlexander E. Karantzalis
Alexander E. Karantzalis
In the present study, a thorough examination of nanoindentation-based mechanical properties of a refractory MoTaNbVW high-entropy alloy (RHEA) was conducted. Basic mechanical properties, such as the indentation modulus of elasticity, indentation hardness, and indentation-absorbed elastic energy, were assessed by means of different input testing variables, such as the loading speed and indentation depth. The obtained results were discussed in terms of the elasto-plastic behavior of the affected material by the indentation process and material volume. Detailed analysis of the RHEA alloy’s nanoindentation creep behavior was also assessed. The effect of testing parameters such as preset indentation depth, loading speed, and holding—at the creep stage—time were selected for their impact. The results were explained in terms of the availability of mobile dislocations to accommodate creep deformation. Crucial parameters, such as maximum shear stress developed during testing (τmax), critical volume for dislocation nucleation (Vcr), and creep deformation stress exponent n, were taken into consideration to explain the observed behavior. Additionally, in all cases of mechanical property examination and in order to identify those input testing parameters—in case—that have the most severe effect, an extensive statistical analysis was conducted using four different methods, namely ANOVA, correlation matrix analysis, Random Forest analysis, and Partial Dependence Plots. It was observed that in most of the cases, the statistical treatment of the obtained testing data was in agreement with the microstructural and metallurgical observations and postulates.

29 September 2022 in Journal of Thermal Spray Technology
Verified
Journal Article
Closed access
PDF file
SKSPYROS KAMNIS
SPYROS KAMNIS
ASA. K. Sfikas
A. K. Sfikas
SGS. Gonzalez
S. Gonzalez
AKA. E. Karantzalis
A. E. Karantzalis
ΕGΕ. Georgatis
Ε. Georgatis

Verified
Journal Article
Open access
PDF file
SKStavros Kiape
Stavros Kiape
MGMaria Glava
Maria Glava
EGEmmanuel Georgatis
Emmanuel Georgatis
SKSPYROS KAMNIS
SPYROS KAMNIS
Theodore MatikasTheodore Matikas
Theodore Matikas
AKAlexander E. Karantzalis
Alexander E. Karantzalis
High entropy alloys (HEAs) have emerged as a frontier in surface engineering, challenging the status quo of traditional alloy systems with their exceptional mechanical properties and corrosion resistance. This study investigates the CoCrFeMnNi0.8V HEA, both as a standalone alloy and in a composite with WC-Co, to evaluate their potential as innovative surface coatings. The CoCrFeMnNi0.8V alloy, enriched with vanadium, demonstrates a unique microstructure with enhanced hardness and wear resistance, while the addition of WC-Co particles contributes to improved toughness and durability. By employing High Velocity Oxy-Fuel (HVOF) thermal spray techniques, coatings are deposited onto steel substrates and subjected to rigorous microstructural characterization, wear, and corrosion resistance testing. The results reveal that the CoCrFeMnNi0.8V coating exhibits impressive corrosion resistance in chloride-rich environments. The composite coating leverages the synergy between the HEA’s inherent corrosion resistance and WC-Co’s wear resistance, striking a balance that suits demanding applications. With optimized processing conditions, the composite WC-Co-reinforced high entropy alloy coating could offer a significant advancement in protective coatings technology, especially for maritime and other corrosive settings. This work not only underscores the versatility of HEAs in surface engineering applications but also opens avenues for the development of new material mixtures.

28 March 2024 in Coatings
Verified
Journal Article
Open access
PDF file
SKStavros Kiape
Stavros Kiape
MGMaria Glava
Maria Glava
EGEmmanuel Georgatis
Emmanuel Georgatis
SKSPYROS KAMNIS
SPYROS KAMNIS
Theodore MatikasTheodore Matikas
Theodore Matikas
AKAlexander E. Karantzalis
Alexander E. Karantzalis
High-entropy alloys (HEAs) are revolutionizing the field of surface engineering, challenging traditional alloy frameworks with their superior mechanical attributes and resistance to corrosion. This investigation delves into the properties of the CoCrFeMnNi0.8V HEAs, both as a standalone material and when blended with Cr3C2-Ni20Cr, to evaluate their efficacy as cutting-edge surface treatments. The addition of vanadium to the CoCrFeMnNi0.8V alloy results in a distinctive microstructure that improves hardness and resistance to abrasion. The incorporation of Cr3C2-Ni20Cr particles enhances the alloy’s toughness and longevity. Employing high-velocity oxy-fuel (HVOF) thermal spray methods, these coatings are deposited onto steel substrates and undergo detailed evaluations of their microstructural characteristics, abrasion, and corrosion resistance. Findings reveal the CoCrFeMnNi0.8V coating’s exceptional ability to withstand corrosion, especially in environments rich in chlorides. The hybrid coating benefits from the combination of the HEA’s inherent corrosion resistance and the enhanced wear and corrosion resistance provided by Cr3C2-Ni20Cr, delivering comprehensive performance for high-stress applications. Through the fine-tuning of the application process, the Cr3C2-Ni20Cr reinforced high-entropy alloy coating emerges as a significant advancement in protective surface technology, particularly for use in marine and corrosive settings. This study not only highlights the adaptability of HEAs in surface engineering but also prompts further investigation into innovative material pairings.