Castor (Ricinus communis L.) is an important oil crop. Leaf spots on castor with the disease incidence about 22.5%, have been observed on about 2,000 plants in a field in Zhanjiang (21.17N, 110.18E...

Recently, stainless steel (SSL) miniscrew implants have been used in orthodontic clinics as temporary anchorage devices. Although they have excellent physical properties, their biocompatibility is relatively poor. Previously, our group developed a two-phase biomimetic calcium phosphate (BioCaP) coating that can significantly improve the biocompatibility of medical devices. This study aimed to improve the biocompatibility of SSL by coating SSL surface with the BioCaP coating. Titanium (Ti) discs and SSL discs (diameter: 5 mm, thickness: 1 mm) were used in this study. To form an amorphous layer, the Ti discs were immersed in a biomimetic modified Tyrode solution (BMT) for 24 h. The SSL discs were immersed in the same solution for 0 h, 12 h, 24 h, 36 h and 48 h. To form a crystalline layer, the discs were then immersed in a supersaturated calcium phosphate solution (CPS) for 48 h. The surface properties of the BioCaP coatings were analysed. In addition, bovine serum albumin (BSA) was incorporated into the crystalline layer during biomimetic mineralisation as a model protein. The morphology, chemical composition and drug loading capacity of the BioCaP coating on smooth SSL were confirmed. This coating improved roughness and wettability of SSL surface. In vitro, with the extension of BMT coating period, the cell seeding efficiency, cell spreading area and cell proliferation on the BioCaP coating were increased. These in vitro results show that the BioCaP coating can improve surface properties of smooth medical grade SSL and serve as a carrier system for bioactive agents.

Oryza rufipogon Griff is a wild rice germplasm that might contain genes valuable for rice breeding. In May to June 2019, a leaf disease on wild rice (O. rufipogon cv. ‘Haihong-12’) was observed in ...

In recent years, wild rice (Oryza rufipogon Griff) has been widely cultivated because of its health-promoting effects. In May 2019, leaf spot lesions on cv. Haihong-12 were observed in Zhanjiang (20.93N, 109.79E), China. Leaf symptoms were yellow-to-brown, oval or circular with a very distinctive, large yellow halo. Black spores appeared on the leaves with advanced symptoms. The lesions coalesced, causing the entire leaf to become blighted and die. Disease incidence reached approximately 10% in the fields (8 ha) surveyed. Twenty leaves with symptoms were collected and cut into pieces of 2 ×2 cm in size. They were surface-disinfected with 75% ethanol for 30 s and 2% sodium hypochlorite (NaOCl) for 60 s, rinsed three times with sterile water, blotted dry on sterile paper, plated on potato dextrose agar (PDA) medium, and incubated at 28°C in the dark for 4 days. Ten pure cultures were obtained by transferring hyphal tips to new PDA plates, and monosporic cultures were obtained from three isolates (Nos-1, Nos-2, and Nos-3). Those isolates exhibited very similar morphological characteristics on PDA. Colony of isolate Nos-1 was white at the early stage and became dark gray after 7 days. Conidia were produced from clusters of conidiophores, single celled, black, smooth, spherical, and 9.5 to 14.2 µm (average 10.6 µm ± 0.42) in diameter. Morphological characteristics of the isolates matched the description of Nigrospora oryzae Petch (Wang et al. 2017). The ITS region was amplified using primers ITS1 and ITS4 (White et al. 1990). Nucleotide sequences of isolates Nos-1, Nos-2, and Nos-3 deposited in GenBank under acc. nos. MW042173, MW042174, and MW042175, respectively, were 100% identical to N. oryzae (acc. nos. KX985944, KX985962; and KX986007). A phylogenetic tree generated based on the ITS sequences and using a Maximum Likelihood method with 1,000 bootstraps showed that these three isolates from wild rice were grouped with other N. oryzae isolates downloaded from GenBank (bootstrap = 100%) but away from other Nigrospora spp. Pathogenicity test was performed with these three isolates in a greenhouse at 24 to 30°C. Approximately 50 seedling of wild rice cv. Haihong-12 were grown in each pot. At the 3-leaf stage, plants in three pots were inoculated with each isolate by spraying a spore suspension (105 spores/ml) until runoff. Three pots sprayed with sterile water served as the controls. Each 3-pot treatment was separately covered with a plastic bag. The test was conducted three times. Diseased symptoms were observed on the inoculated leaves after 10 days while no disease was observed in the control plants. Morphological characteristics and the ITS sequences of fungal isolates re-isolated from the diseased leaves were identical to those of N. oryzae. N. oryzae has been reported to cause leaf spot on O. sativa (Wang et al. 2017), but not on O. rufipogon. Thus, this is the first report of N. oryzae causing leaf spot of O. rufipogon in China. The finding provides the information important for further studies to develop management strategies for control of this disease.

Background: Bone grafts are in high demand due to the increase in the cases of bone defects mainly caused by trauma, old age, and disease-related bone damages. Tissue-engineered calcium phosphate (CaP) biomaterials match the major inorganic contents of bone, thereby could be the potential bone graft substitute. However, CaP-bone grafts lack the osteoinductivity that is vital for effective bone regeneration. In this study, we aimed to test the bone defect healing potential of biomimetically fabricated low dose BMP2-doped CaP (BMP2.BioCaP) grafts in a large animal model.Methods: Low dose BMP2 was doped internally (BMP2-int.BioCaP) or on the surface of CaP (BMP2-sur.BioCaP) grafts during the fabrication process. Our previous study showed the robust bone regenerative potential of BMP2-int.BioCaP and BMP2-sur.BioCaP grafts in the rat ectopic model. In this study, we investigated the bone defect healing potential of BMP2.BioCaP grafts in sheep humerus/femoral defects, as well as compared with that of autologous bone graft and clinically used deproteinized bovine bone (DBB) xenograft.Results: Different ways of BMP2 doping did not affect the surface morphology and degradation properties of the graft materials. Micro-CT and histology results showed robustly higher bone defect-healing potential of the BMP2.BioCaP grafts compared to clinically used DBB grafts. The bone defect healing potential of BMP2.BioCaP grafts was as effective as that of the autologous bone graft. Although, BMP2-int.BioCaP doped half the amount of BMP2 compared to BMP2-sur.BioCaP, its' bone defect healing potential was even robust. The BMP2.BioCaP grafts showed less immunogenicity compared to BioCaP or DBB grafts. The volume density of blood vessel-like and bone marrow-like structures in both BMP2.BioCaP graft groups were in a similar extent to the autologous group. Meticulous observation of higher magnification histological images showed active bone regeneration and remodeling during bone defect healing in BMP2.BioCaP graft groups.Conclusion: The robust bone regenerative potential of BMP2.BioCaP grafts in the ectopic model and in-situ bone defects in small and large animals warrant the pre-clinical studies on large animal critical-sized segmental bone defects.