The use of hybrid energy storage systems (HESS) in renewable energy sources (RES) of photovoltaic (PV) power generation provides many advantages. These include increased balance between generation and demand, improvement in power quality, flattening PV intermittence, frequency, and voltage regulation in Microgrid (MG) operation. Ideally, HESS has one storage is dedicated for high energy storage (HES) and another storage for high power storage (HPS) purpose. HES is used to fulfill long-term energy demand, while HPS is used to handle power transients and fast load fluctuations. This paper examines HESS comprehensively for PV power generation and focuses on its ability to combine two storage technologies. The two storage technologies include high energy and high power. This paper also analyzes the important aspects of advance HESS in PV power generation in the context of capacity sizing, power converter topology and strategies management energy. Several capacity sizing methods were critically reviewed and tabulated. Power converter (PC) topologies are classified and briefly discussed regarding their advantages and disadvantages. Furthermore, energy management strategies with various control techniques are critically classified and evaluated for better future direction. In addition, the implementation of HESS on PV power generation in current real projects is presented and evaluated. Finally, this paper can be considered as useful guide for the use of HESS in PV power generation including features, limitations, and real applications.
This study discusses the use of a retired battery from an electric vehicle for stationary energy storage electric vehicle charging in a residential household. This research provides a novel in-depth examination of the processes that may be necessary to investigate the life loss of a battery, whether new or used. The main contribution is to promote the feasibility of the application from both a technical and economic point of view. The semi-empirical models are then utilized to analyze the life fading that is used in economic studies. In terms of lower initial investment costs for the battery and solar photovoltaics, the numerical calculation demonstrates that the used second-life battery with a DOD of 85% has more advantages over a new battery in the same condition. Additionally, compared to a new battery, a second-life battery gradually loses life and benefits from recycling after a projected 10-year lifespan. These results support the feasibility of the project. A discussion of project hurdles is included in which the hybrid converter modification may be achieved. Policymakers are encouraged to keep this valuable scheme in mind for the sake of margin profit and environmental preservation.
The purpose of this research is to present a thorough evaluation of energy management systems that consist of hybrid energy storage systems and their control algorithms, which may be used in electric vehicles. This paper outlines the characteristics of electric vehicles, research methods, an analysis of the hybrid energy storage system architecture, the converter topology, and energy management techniques. The strength and co-occurrence of keywords over the past ten years are shown in this study using a systematic research framework for performing a literature review and using keyword analysis techniques. This study reveals a pattern of recently and frequently used terms in works of literature. Consequently, their suitability, benefits, and drawbacks are assessed. In this study, the hybrid energy storage system and converter circuit architecture are evaluated and rated. A non-isolated DC-DC converter connected to an SC is a suitable configuration for the hybrid converter because it is simple to build, is reliable, and has minimal loss/weight/cost, which all improve vehicle performance. In terms of the application of control strategies, it is shown that deterministic and fuzzy-rule-based control techniques are successfully assessed using real-scale vehicle experiments and can be selected for manufacturing. On the other hand, real-time optimization-based energy management techniques have been effectively shown in lab-scale tests and may be used in a future real-scale vehicle.
A sensorless extended Kalman filter (EKF) based direct torque control (DTC) with the use of a constant switching frequency control (CSFC) of induction machine is proposed in this research work. This paper is meant to investigate the dynamic performance for DTC-CSFC and DTC with a hysteresis torque controller by applying different speed step changes from three different low speed operations. The dynamic performance results show that the sensorless EKF-based DTC-CSFC is superior to the conventional EKF-based DTC when reference speed change is applied from 0 to 59 rad/s. Additionally, improvement in the reduction of torque ripples is achieved for all step changes of speed. The effectiveness of the proposed EKF-based DTC-CSFC is confirmed by experimental validation.
This paper proposes a new control strategy and design for auxiliary power source using in Battery Hybrid Electric Vehicle (BHEV) based on acceleration power. The control strategy takes actual speed, acceleration and terminal voltage of supercapacitors (SCs) into account for controlling the energy and power demanded. The detail design of the auxiliary power source and its dynamic control are demonstrated. Cascade control is implemented to control voltage and current of SCs. The benefits of the auxiliary power source in which recapture the regenerative power are examined by numerical simulation availing the real scale vehicle and the fully driving test cycle. Comparison of energy consumption between pure Battery Electric Vehicle (BEV) and BHEV reveals the utilization of the auxiliary power source. The power portions and DC bus voltage regulations are investigated so that validating the proposed system.
Government policies are crucial factors for supporting the growth of the electric vehicle (EV) industry—a growth that can be encouraged, for example, by subsidization designed to reduce the considerable anxiety stemming from the inconvenience of refueling at public charging stations. Subsidizing low priority charging for residential enables cost-effective load management for example controlling of EV charging power for grid reliability at the off-peak rate for 24 h. This solution provides the convenient recharging of EVs at home and prevents an expensive grid upgradation. To advance our understanding of the EV situation, this research used a regression model to forecast the growth rate of the EV market alongside the EV expansion policies in Thailand. The agreement between a policy and forecasting urges the government to prepare power system adequacy for EV loading. The analysis showed that power demand and voltage reduction in a typical low-voltage distribution system that assumes maximum EV loading constitute voltage violations. To address this limitation, this study proposed a rule-based strategy wherein low priority smart EV charging is regulated. The numerical validation of the strategy indicated that the strategy reduced power demand by 25% and 39% compared with that achieved under uncontrolled and time of use (TOU) charging, respectively. The strategy also limited voltage reduction and prolonged battery life. The study presents implications for policymakers and electricity companies with respect to possible technical approaches to stimulating EV penetration.