This review paper examines extraction methods in the dimension stone industry. Traditional techniques, like thermal shock, hammer and chisel, and plug and feather, were used historically. However, advancements in technology have led to the adoption of mechanized methods. Diamond wire cutting is a highly efficient technique that reduces waste and ensures quality. Challenges like high costs and wire breakage remain. Circular diamond saws and frame sawing are explored as alternative methods. Stone characteristics influence machinery selection and researchers have studied the impact on extraction efficiency. Controlled blasting with explosives shows promise and requires further exploration and optimization.
9 July 2024 in Journal of the National Science Foundation of Sri Lanka
This study investigated the relationship between Uniaxial Compressive Strength (UCS) and slake durability index (SDI) in gneiss rocks collected from two aggregate quarry sites. The analysis revealed varying correlations between these two parameters depending on the grouping and categorisation of the data. Initially, a moderate correlation was observed between experimental and estimated UCS values when considering all the data together. However, further examination of the data by dividing it into two categories based on UCS values greater than or equal to 40 MPa and less than 40 MPa yielded insightful results. Within these divided categories, a robust correlation was found between experimental and estimated UCS values for cycles two and four of SDI. Moreover, this study reveals that fresh rock samples from the quarry locations maintained a durability of over 98% through four cycles of the slake durability test. Nonetheless, these same samples exhibited decreased strength, which can be attributed to their mineral composition and internal structural arrangements of the rock samples tested. Therefore, this study incorporated complementary testing methods such as Ultrasonic Pulse Wave Velocity (UPV) and Scanning Electron Microscope/Energy Dispersive X-ray Spectroscopy (SEM/EDX). These tests served as valuable tools for validating the results and enhancing the understanding of micro-scale changes within the gneiss rock samples. The comparison of test values and the exploration of underlying factors confirmed the reliability and usefulness of UPV and SEM/EDX as supporting tools for this study. The study also recommended that the developed equations can be useful for engineers and researchers in estimating rock strength quickly and inexpensively by replacing the laborious tasks involved in traditional laboratory testing.
This comprehensive review paper provides a detailed analysis of the extraction methods employed in the dimension stone industry. Natural rock materials used in construction, have been historically extracted using primitive techniques such as thermal shock, hammer and chisel, and plug and feather. However, significant technological advancements have revolutionized the industry, leading to the widespread adoption of mechanized methods. One highly efficient technique is diamond wire cutting, which involves the utilization of diamond-engraved bits affixed to a tensioned steel wire. This method has demonstrated remarkable capabilities in minimizing waste generation and ensuring exceptional machining quality. Nonetheless, challenges such as high operating costs and wire breakage persist and require further investigation. In addition to diamond wire cutting, this review explores the utilization of circular diamond saws and frame sawing as alternative extraction methods. The geotechnical characteristics of the stone play a critical role in the selection of appropriate machinery, and researchers worldwide have conducted numerous studies to investigate the impact of each parameter on the extraction efficiency of these mechanized techniques. Moreover, controlled blasting with explosives emerges as a promising alternative for dimension stone extraction, warranting further exploration and optimization.
6 September 2025 in International Journal of Earth Sciences
Assessing the influence of microstructural features on the deformation of rocks under triaxial loading is vital in rock engineering applications, aiding safe and efficient operations by predicting the deformation of rocks. Triaxial testing offers the simulation of stress conditions within a rock to examine the deformation of rocks with confinements. This research focuses on how microstructural features, such as cementing material and pore geometry, affect the deformation behaviour of rocks subjected to triaxial loading. Two rock types were considered in this study: Kimachi sandstone (medium hard clastic rock) and Bibai sandstone (hard clastic rock). The progressive failure behaviour under Hydro Mechanical (HM) coupling effect was analysed by stress-strain distribution and the fracture geometry was examined using CT images of the specimens which were tested under different confinements. Thin sections were analysed to examine the changes in porosity and the effect on the cementing material with the confinement. The results of the proposed approach reveal a clear influence of the effective confinement on the failure of rocks and how it influences the porosity and cementing material of rocks. It is found that the Bibai sandstone shows a brittle failure and a shearing deformation while Kimachi sandstone shows a brittle to ductile failure and shearing to compaction deformation with the confinement due to the less presence of cementing material within Bibai sandstone compared to Kimachi sandstone. Therefore, with the confinement, the porosity of Bibai sandstone increases while it decreases in Kimachi sandstone. The results highlight the differences in the failure mechanism of a particular rock type for the same effective confinement which is a result of only a partial contribution of the pore pressure on the failure. These findings provide valuable insight into the assessment of microstructural features on the deformation of rocks under triaxial loading, aiding in the development of safer and more efficient rock engineering operations.
DLDepartment of Nanoscience Technology Wayamba university of Sri Lanka
Department of Nanoscience Technology Wayamba university of Sri Lanka
Recent scientific studies are anticipating the development of novel, expeditious, and dependable methodologies for mineral exploration. This urgency stems from the extensive exploitation of major valuable mineral deposits in easily accessible areas. Furthermore, contemporary exploration strategies are increasingly directed towards finding deeper deposits and challenging locations, where accessibility is limited [1], [2]. Geophysical methodologies comprise a range of techniques utilized to acquire insights into the subsurface properties of the earth. These methods facilitate the acquisition of data from considerable depths, with verification achieved through borehole core sampling [1]. Additionally, remote sensing data can offer valuable insights such as surface material composition and rock types, particularly in areas where vegetation cover is not comprehensive during the reconnaissance surveys [3]. Remote sensing data, including both multispectral and hyperspectral imagery used for mineral exploration does not serve as a replacement for ground truth data, but rather complements it by providing additional information about the region of interest [1], [2], [4]. The identification of potential mineral deposits is facilitated by the examination of available geological data, which includes observations such as specific mineral occurrences within distinct rock types, the distribution of geological structural features, significant alteration zones, deposits forms with high-temperature zones and hydrothermally altered areas [1], [5]. At a regional scale, various lithological features such as textural characteristics of igneous and sedimentary rocks, structural formations, and vegetation patterns can be detected. These observations provide essential insights into the geological and ecological context of the area, contributing to a comprehensive understanding of the region's natural environment. Integrating remote sensing with field observations and advanced geospatial technologies provides a richer and more accurate understanding of landscapes. This holistic approach supports sustainable development by offering a comprehensive view of environmental conditions and human influences, leading to more effective and informed decision-making in land use and resource management.