This review paper examines extraction methods in the dimension stone industry. Traditional techniques, like thermal shock, hammer and chisel, and plug and feather, were used historically. However, advancements in technology have led to the adoption of mechanized methods. Diamond wire cutting is a highly efficient technique that reduces waste and ensures quality. Challenges like high costs and wire breakage remain. Circular diamond saws and frame sawing are explored as alternative methods. Stone characteristics influence machinery selection and researchers have studied the impact on extraction efficiency. Controlled blasting with explosives shows promise and requires further exploration and optimization.
This comprehensive review paper provides a detailed analysis of the extraction methods employed in the dimension stone industry. Natural rock materials used in construction, have been historically extracted using primitive techniques such as thermal shock, hammer and chisel, and plug and feather. However, significant technological advancements have revolutionized the industry, leading to the widespread adoption of mechanized methods. One highly efficient technique is diamond wire cutting, which involves the utilization of diamond-engraved bits affixed to a tensioned steel wire. This method has demonstrated remarkable capabilities in minimizing waste generation and ensuring exceptional machining quality. Nonetheless, challenges such as high operating costs and wire breakage persist and require further investigation. In addition to diamond wire cutting, this review explores the utilization of circular diamond saws and frame sawing as alternative extraction methods. The geotechnical characteristics of the stone play a critical role in the selection of appropriate machinery, and researchers worldwide have conducted numerous studies to investigate the impact of each parameter on the extraction efficiency of these mechanized techniques. Moreover, controlled blasting with explosives emerges as a promising alternative for dimension stone extraction, warranting further exploration and optimization.
There is a potential to enhance both the efficiency and the quantity of explosives in limestone excavation utilising deck charge patterns in the Aruwakkalu limestone quarry in Sri Lanka. To achieve this a series of combinations with ANFO and deck charge patterns were simulated using a numerical analysis software named JKSimblast – 2D bench. This study entails simulating and validating the existing blasting geometry in the rock blasting practice. The fragmentation curves of the real world blast events were analysed and plotted using an AI platform called “Streyos”. Subsequently, the blasting geometry was optimised by adjusting the spacing and burden with different charge amounts. A comparison was made between the explosive energy distribution figures of the simulated blast with optimised blasting geometry and the deck charging blast series. To simulate the limestone condition for the rock mass, throughout different simulations, the rock specific gravity (SG) was defined as 2.6. Optimised spacing and burden for a 10.3 m deep and 72 mm diameter blast hole pattern were found as 2.9 m and 2.4 m respectively, ensuring favourable conditions with controlled ground vibration (5 mms-1) and air blast overpressure (120 dB). The optimal configuration for minimising boulder formation in the upper section of the hole was 23.17 kg of ANFO quantity per hole with a two-charge deck pattern.