The review is devoted to the analysis of the state-of-art of the static version of headspace analysis (HSA), one of the most popular methods of sample preparation for determining, first of all, volatile organic substances in liquid and solid samples. The theoretical foundations of the method, its main regularities, and fields of application are considered. The main trends in the development of static HSA are noted: the expansion of the range of test samples and analytes and the emergence and development of combined sample preparation options based on the combination of HSA and adsorption preconcentration of analytes from the extractant gas. Technical means of HSA automation, that is, various options for liquid and solid-phase microextraction, are actively developing.
26 September 2019 in Journal of Analytical Chemistry
We considered the physicochemical regularities and analytical capabilities of separation methods based on the manifestation of capillary effects in hydrophobic microporous media, namely,...
The new scheme of the rapid preconcentration of volatile organic substances followed by the thermodesorption and gas chromatographic determination by using a flame ionization detector is proposed for the analysis of air. The scheme implies a change in the geometry of the adsorbent layer in a column during the transition from adsorption to thermal desorption steps. The extraction of analytes is carried out in a wide tube, allowing quantitative adsorption at higher flow rates of the analyzed air passed through the magnetic sorbent held in a thin layer retained by a permanent magnet without any supporting frits. Novel magnetic adsorbents composed of magnetite or a zirconia/magnetite core and pyrocarbon shell are developed for this application. At the end of the adsorption step, the magnet moved out of the system, and the adsorbent transferred under the gravity force into a narrow tube, which provides the more efficient heating of the adsorbent and minimal blurring of the analyte zones during the subsequent thermal desorption. The proposed scheme allows a significant reduction (approximately 10 times) of the time required for the preconcentration of analytes, which is illustrated by the GC determination of alcohols (butanol-1, pentanol-1), phenol, and o-cresol in the air.
New composite adsorbents including silica supports (silica, aerosilogel, and diatomite) and carbon materials (multiwall carbon nanotubes and pyrolytic carbon) have been prepared and characterized. The analytical capabilities of the produced sorbents have been evaluated by their efficiency in the express pre-concentration of volatile organic compounds (butanol and phenols) from the air stream. The prepared surface-layered adsorbents containing multiwall carbon nanotubes placed onto the surface of aerosilogel by use of the carbon vapor deposition method with preloading cobalt nanostructures as a catalyst were found significantly more efficient than traditionally used graphitic carbon-based adsorbents Carbopacks B, C, and X. Additionally, a new adsorbent composed of diatomite Porochrome-3 support coated with a pyrocarbon layer was prepared. This low surface area composited adsorbent allowed both quantitative pre-concentration of phenol and isomeric cresols from the air and their thermal desorption. The developed adsorbents provided fast pre-concentration of selected phenols with a concentration factor of 2 × 103 in 5 min and were used for gas chromatographic determination of analytes in the air at low concentration levels starting from several μg/m3 with a flame ionization detector.
Optimal conditions (temperature, porous structure and configuration of mass exchange layer in the chromatomembrane cell, and also the direction of water sample and extractant gas flows through it)...
7 September 2021 in Journal of Analytical Chemistry
The analytical capabilities of various schemes of the relative movement of the flows of an analyzed aqueous phase and an extractant gas in chromatomembrane gas extraction were compared. It was demonstrated that a direct-flow scheme is preferable when the efficiency of the system increases with the flow rate of the extractant gas (online analysis), whereas a two-dimensional scheme is preferable in the analysis of preliminarily selected samples.