This paper presents a recently developed simulation software tool for ac predictive and mitigation techniques for pipeline networks influenced by high-voltage (HV) power lines. The software can deal with any configuration (no limitation on number of pipes, transmission lines, bonds, groundings, coating, and soil resistivity) and is very user friendly and robust since a general applicable algorithm is used to calculate the induced electromagnetic force (EMF), eliminating the need for a subdivision of the pipelines in sections parallel or not to the transmission line(s). With the calculated values for the EMF, the induced voltages and currents are then obtained by solving the well-known transmission-line model using a numerical technique that allows to specify the pipeline parameters (diameter, coating, soil resistivity, ...) for each individual section of the pipeline. In this paper, simulation results will be presented and compared with available theoretical test cases. It will be demonstrated that the calculated values for the induced EMF and the induced voltage and current are in perfect agreement with these theoretical test cases. In addition, it will be proven that commonly used formulas for the induced EMF need to be handled with care, especially when the distance between the transmission line and the pipeline becomes bigger.

The inductance calculation and the layout optimization for spiral inductors still are research topics of actuality and very interesting especially in radio frequency integrated circuits. Our research work is fixed on the vast topics of this research area. In this effect we create a software program dedicate to dc inductance calculation and to layout optimization for spiral inductors. We use a wide range of inductors in the application made with our program; we compare our applications results with measurements results existing in the literature and with three-dimensional commercial field solver results in order to validate it. Our program is accurate enough, has a very friendly interface, is very easy to use and its running time is very sort compared with other similar programs. Since spiral inductors tolerance is generally on the order of several percent, a more accurate program is not needed in practice. The program is very useful for the spiral inductor design because it calculates the inductance of spiral inductors with a very good accuracy and also for the spiral inductor optimization, because it optimize the spiral inductor layouts in terms of technological restrictions and/or in terms of the designers' needs.

This paper deals with high frequency analysis of spiral inductors, used in microelectronics circuits, to optimize their configuration. Software developed, designed, and implemented by the authors for nano and micrometre spiral inductor high frequency analysis, named ABSIF, is presented in this paper. ABSIF determines the inductance, quality factor, and electrical parameters for square, hexagonal, octagonal, and circular spiral inductors and their configuration optimization for energy efficiency. ABSIF is a good tool for spiral inductor design optimization in high frequency applications and takes into account the imposed technological limits and/or the designers’ constraints. A set of spiral inductors are considered and analysed for high frequency values using ABSIF, and the results are presented in the paper. The validation of ABSIF was completed by comparing the results with those obtained using a similar commercial software, Sonnet Lite^TM, which is dedicated to high frequency electromagnetic analysis.

This paper presents the computer aided design (CAD) and computer aided engineering (CAE) modeling of Cluj-Sud 110 kV high voltage substation in order to examine the influence of substation constructive elements and apparatus (e.g. phase conductors, bypass bus bars, breakers and towers) on the spatial electric field distribution. The substation belongs to FDEE Electrica distributie Transilvania Nord SA. In a first step the detailed three dimensional (3D) CAD models of the substation components are constructed and assembled in the CAD environment SolidWorks. Then the exact 3D coordinates of the terminals are automatically retrieved and the electric field distribution is computed on the 3D CAD model using a CAE software developed. The electric field distribution is represented on horizontal and transversal slices at the 3D CAD model in order to highlight the high intensity field zones and compare them with respect to the actual legislation norms of human exposure.