Due to its excellent reversibility and stability, dimethyl sulfoxide (DMSO) electrolyte is seen to be a promising nonaqueous electrolyte. Compared to aqueous Zn–MnO2 systems, ZIBs having DMSO electrolyte, and the manganese dioxide (MnO2) cathode display inferior rates and capacity performances. However, it is found that the addition of water can improve the performance of DMSO-based ZIBs, even a small amount of water. In this work, the effect of water on the performance of DMSO-based ZIBs is thoroughly investigated. Herein, the layer-type MnO2 (δ type, birnessite) is used as the main cathode material. Ex situ/operando X-ray diffraction (XRD) analysis, X-ray photoelectron spectroscopy (XPS) and in situ X-ray absorption spectroscopy (XAS) results suggest that the existence of water in DMSO electrolytes can lead to changes occurring in the Zn2+ intercalated phase. Zn-birnessite when replaced by super-hydrated Zn-buserite provides a much improved solid-phase diffusion of Zn2+ and surface kinetics. The optimized battery yields the highest capacity of 224 mA h g−1 and can cycle over 2500 cycles. This discovery extends the understanding of wet nonaqueous electrolyte chemistry and paves the way towards the practical application of ZIBs.
23 June 2025 in ACS Sustainable Chemistry & Engineering
The introduction of NH4OAc forms an NH4+ electrostatic layer to prevent zinc dendrite growth, while OAc− ions buffer pH, reducing corrosion and competing with water molecules to regulate the Zn/electrolyte interface.
The development of stable, high-performance electrolytes is essential to addressing the safety concerns and limited lifespan caused by the thermal and chemical instability of traditional organic carbonate-based electrolytes in lithium-ion batteries (LIBs). This study examined the potential of mixed solvent systems, specifically ethyl methyl carbonate (EMC) and tetramethylene sulfone (TMS), to modify ion solvation and improve ionic conductivity in LIB electrolytes. Through molecular dynamics simulations, we investigated the solvation structure and transport properties of lithium ions (Li+) in these solvent environments. The inclusion of TMS altered the solvation structure, with TMS molecules preferentially coordinating with Li+ ions, displacing PF6- anions and reducing their electrostatic interference. Our results demonstrated a synergistic interaction between EMC and TMS, where an EMC/TMS ratio of 1:2 led to a significant improvement in ionic conductivity, reaching 0.91 mS/cm, with a corresponding Li+ transference number of 0.40. These findings provide key insights into the molecular-level interaction governing electrolyte behavior, offering guidance for the design of future solvent mixtures to improve the safety and efficiency of LIBs.
This study aims to synthesize α,β-unsaturated carbonyl compounds with branched structures via aldol condensation of furfural and 2-butanone using magnesium–aluminum (MgAl) mixed oxides as heterogeneous acid–base catalysts. Regarding the molecular structure of 2-butanone, there are two possible enolate ions generated by subtracting the α-hydrogen atoms at the methyl or methylene groups of 2-butanone. The branched-chain C9 products, derived from the methylene enolate ion, can be applied as bio-jet fuel precursors. The most suitable catalyst, contributing the highest furfural conversion (63%) and selectivity of the branched-chain C9 products (77%), is LDO3, the mixed oxides with 3:1 Mg:Al atomic ratio, with a high surface area and a large number of medium basic sites. The suitable reaction conditions to produce the branched-chain C9 ketones are 1:5 furfural:2-butanone molar ratio, 5 wt.% catalyst loading, 120 °C reaction temperature, and 8 h reaction time. Additionally, this study investigates the adsorption of 2-butanone onto a mixed oxide using in situ Fourier transform infrared spectroscopy; the results of which suggest that the methylene enolate of 2-butanone is the likely dominant surface intermediate at elevated temperatures. Accordingly, the calculation, based on density functional theory, indicates that the methylene enolate ion of 2-butanone is the kinetically favorable intermediate on an MgO(100) as a model oxide surface.
Operando optical microscopy enables imaging at the interface between the Zn electrode and the electrolyte of 1 M ZnSO4(aq) in the symmetrical Zn/Zn cells assembled as the pouch cells with the mechanical load of 0.8 MPa. The imaging was executed during cycling of Zn plating and stripping at the different current densities of 0.5, 1.0, 2.0, and 4.0 mA cm−2, and the areal capacity of 2 mAh·cm−2. When the current densities are below 4.0 mA cm−2, no intense Zn dendrites are observed. However, at 4.0 mA cm−2, the severe Zn dendrites can penetrate through the separator and cause short-circuiting. From the electrochemical perspective, the voltage profile of such system drops to almost zero volt. Both operando optical and ex-situ synchrotron X-ray imaging further prove the appearance of the Zn dendrites. By Raman spectroscopy and X-ray diffraction, the cycled Zn electrode surface contains passivation species of Zn4(OH)6SO4, ZnO, and Zn(OH)2 that could limit the active surface area for the Zn plating/stripping, accelerating the localized current density and favoring the growth of Zn dendrites. With the SiO2 additive of 0.5% w/v in 1 M ZnSO4(aq), the severe Zn dendrites disappear, as well as the cycled Zn/electrolyte interface becomes close to the pristine state; low degree of the Zn electrode roughness and the Zn surface passivation is noticed. The appearance of the claimed Zn surface morphology was also confirmed by Scanning Electron Microscopy (SEM). In turn, too low or too high SiO2 content in the electrolyte does not generate desirable effects. A high level of Zn dendrites and short circuiting are still recognized. Hence, both the operando and ex-situ characterizations can mutually validate the phenomena at the Zn/electrolyte interface.