Spatial frequency domain imaging (SFDI) is well established in biology and medicine for non-contact, wide-field imaging of optical properties and 3D topography. Especially for turbid media with displaced, tilted or irregularly shaped surfaces, the reliable quantitative measurement of diffuse reflectance requires efficient calibration and correction methods. In this work, we present the implementation of a generic and hardware independent calibration routine for SFDI setups based on the so-called pinhole camera model for both projection and detection. Using a two-step geometric and intensity calibration, we obtain an imaging model that efficiently and accurately determines 3D topography and diffuse reflectance for subsequently measured samples, taking into account their relative distance and orientation to the camera and projector, as well as the distortions of the optical system. Derived correction procedures for position- and orientation-dependent changes in spatial frequency and intensity allow the determination of the effective scattering coefficient ${\mathsf{\mu }}_s^{\prime }$ and the absorption coefficient ${\mathsf{\mu }}_a$ when measuring a spherical optical phantom at three different measurement positions and at nine wavelengths with an average error of 5% and 12%, respectively. Model-based calibration allows the characterization of the imaging properties of the entire SFDI system without prior knowledge, enabling the future development of a digital twin for synthetic data generation or more robust evaluation methods.

In this work, we investigate image formation in the confocal laser scanning microscope for different single scatterers, both theoretically and experimentally. For spherical scatterers, an effective and fast algorithm was implemented to calculate the confocal image for different diameters and wavelengths. Measurements on a polystyrene sphere (PS) with a diameter of 20 µm confirmed the expected effects, for example, the appearance of a central signal similar to the point spread function of the optical system. Custom single scatterers were produced using 3D-direct laser writing (DLW), including a sphere with dimensions comparable to the aforementioned PS sphere. Despite an inevitably lower surface quality and symmetry, only minor differences were observed in the confocal image of the 3D-DLW sphere compared to a near-perfect PS sphere. Having verified the experimental images of spheres with the computed theoretical data, confocal measurements of four platonic bodies produced by 3D-DLW were measured with the goal to contribute to the understanding of image formation involving more complex scattering geometries.

Spatial-frequency domain imaging is used to determine the optical properties of Elstar apples during the maturation process. A high correlation with Streif index is shown as well as further options of fruit monitoring.