Based on Life Cycle Assessment (LCA) and Eco-indicator 99 method, a LCA model was applied to conduct environmental impact and end-of-life treatment policy analysis for secondary batteries. This model evaluated the cycle, recycle and waste treatment stages of secondary batteries. Nickel-Metal Hydride (Ni-MH) batteries and Lithium ion (Li-ion) batteries were chosen as the typical secondary batteries in this study. Through this research, the following results were found: (1) A basic number of cycles should be defined. A minimum cycle number of 200 would result in an obvious decline of environmental loads for both battery types. Batteries with high energy density and long life expectancy have small environmental loads. Products and technology that help increase energy density and life expectancy should be encouraged. (2) Secondary batteries should be sorted out from municipal garbage. Meanwhile, different types of discarded batteries should be treated separately under policies and regulations. (3) The incineration rate has obvious impact on the Eco-indicator points of Nickel-Metal Hydride (Ni-MH) batteries. The influence of recycle rate on Lithium ion (Li-ion) batteries is more obvious. These findings indicate that recycling is the most promising direction for reducing secondary batteries’ environmental loads. The model proposed here can be used to evaluate environmental loads of other secondary batteries and it can be useful for proposing policies and countermeasures to reduce the environmental impact of secondary batteries.
8 December 2016 in Environmental Science and Pollution Research
With the rapid increase in production of lithium-ion batteries (LIBs) and environmental issues arising around the world, cathode materials, as the key component of all LIBs, especially need to be environmentally sustainable. However, a variety of life cycle assessment (LCA) methods increase the difficulty of environmental sustainability assessment. Three authoritative LCAs, IMPACT 2002+, Eco-indicator 99(EI-99), and ReCiPe, are used to assess three traditional marketization cathode materials, compared with a new cathode model, FeF3(H2O)3/C. They all show that four cathode models are ranked by a descending sequence of environmental sustainable potential: FeF3(H2O)3/C, LiFe0.98Mn0.02PO4/C, LiFePO4/C, and LiCoO2/C in total values. Human health is a common issue regarding these four cathode materials. Lithium is the main contributor to the environmental impact of the latter three cathode materials. At the midpoint level in different LCAs, the toxicity and land issues for LiCoO2/C, the non-renewable resource consumption for LiFePO4/C, the metal resource consumption for LiFe0.98Mn0.02PO4/C, and the mineral refinement for FeF3(H2O)3/C show relatively low environmental sustainability. Three LCAs have little influence on total endpoint and element contribution values. However, at the midpoint level, the indicator with the lowest environmental sustainability for the same cathode materials is different in different methodologies.