Typical oceanographic instruments are expensive, complex to build, and hard to deploy and require constant and specialized maintenance. In this paper, we present a cheap and simple technique to estimate a three-dimensional surface elevation map, , the directional spectrum, and the main sea state parameters using inexpensive smartphones. The proposed methodology uses Time Lagged Cross Correlation (TLCC) between the audio signals from two independent video records to perform the frame synchronization. This makes the system much easier to deploy, where the main requirement is a fixed or moving platform close to the sea. The time records are mostly limited by the equipment storage space and battery life, although it can be easily replaced or recharged. Here, we pose the basis for an inexpensive yet powerful stereo reconstruction device and discuss its capabilities and limitations. The smartphone system capabilities were illustrated here by near shore experiment, at Leme beach in the Southeast of Brazil, and the results were compared against a pressure sensor. For this particular setup, the root mean square error in terms of significant wave height is of the order of with perfect estimation of the peak period. The results are promising and demonstrate the validity and applicability of the technique.
18 January 2021 in International Journal of Remote Sensing
The Synthetic Aperture Radar (SAR) carried on-board satellites yields invaluable data of global wave spectra since the early 1990s, with several satellites in orbit at present and more launches scheduled in the near future. However, the retrieval of wave information from SAR images constitutes a complex set of procedures. In this context, we have presented here a methodology to simulate SAR image spectra of ocean swell waves. SAR simulators are important tools for the implementation and evaluation of wave spectra retrieval schemes. The one proposed here is based on the Hasselmann Transform whose Modulation Transfer Functions (MTF’s) account for the main physical processes involved in the imaging of ocean waves. A detailed description of its structure is provided. Through several test cases, we highlight some particularities of the relationship between SAR image spectra and wave spectra. We have evaluated the impact of the parameters settings and input information on the retrieval process, pinpointing possible shortcomings. The results indicated that useful information about the processes involved in the imaging of ocean swells can be derived from the SAR simulator.
26 July 2005 in Journal of Geophysical Research: Oceans
One year of directional buoy measurements comprising the period from May 1994 to April 1995 acquired in deep ocean waters by an offshore heave‐pitch‐roll buoy are used for the assessment of the directional wave spectra retrieved from synthetic aperture radar (SAR) images using the Max‐Planck‐Institut (MPI) scheme. SAR is the only sensor so far deployed from satellites that can provide measurements of the directional wave spectrum with high spatial and temporal coverage when operating in the so‐called SAR wave mode. Millions of SAR wave mode imagettes have been and are still being acquired over all oceanic basins yielding a powerful data set for investigating wind waves. However, directional spectral information retrieved from SAR images has not yet been assessed against in situ measurements. For the first time, detailed validations of the main wave parameters, that is, significant wave height, mean direction of propagation, and mean wavelength, are performed. It is shown that in terms of these parameters the first‐guess spectra taken from the wave model WAM are in better agreement with the buoy measurements than the MPI scheme retrievals. When considering only the longer waves in the part of the spectrum observed by SAR, on the other hand, the algorithm performs at least as well as the third‐generation WAM wave model. In addition to the limitations of the MPI scheme in extending the spectral information beyond the high wave number cut‐off, an observed misinterpretation of wind sea energy as swell by the MPI scheme is shown to be caused by the use of a quasi‐linear approximation of the imaging model in the numerical iteration procedure.
16 October 2019 in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing
A new approach for assessing the quality of Synthetic Aperture Radar (SAR) wave spectra is presented here. The algorithm addresses two specific issues, related to the 180° directional ambiguity in the propagation direction inherent to SAR measurements, and the removal of noise. In spite of several and progressive advances in the mapping and retrieval of SAR wave spectra, these issues are persistent in the existing official databases and hinder the use of these data for practical uses. This new algorithm is based on a recently developed database of long-term global wave spectral characteristics, which allows estimating the occurrence probability of every individual wave system found in the observed spectra, and that of its ambiguous pair. In addition, assuring the spatial consistency of the wave systems along track, helps obtaining more robust results. In this sense, wave spectra within a track are processed in several steps, so that wave systems with more likelihood of being correct are processed first, and consequently used to evaluate the more challenging components. Accordingly, a specific quality label is assigned to every wave system depending on the certainty achieved. An Envisat track over a challenging area with multiple crossing swells is used to illustrate the performance of the algorithm.
O presente trabalho apresenta uma comparação entre algumas rodadas do modelo numérico de geração e propagação de ondas Wavewatch III empregando campos de vento com diferentes resoluções espaciais e temporais em uma região tropical do oceano Atlântico Sul. Os campos de vento utilizados de entrada são os da Reanálise do NCEP (com resolução espacial de cerca de 2º e resolução temporal de 6 horas), do Global Forecast System (resolução espacial de 1º e resolução temporal de 6 horas), bem como os campos de maior resolução espacial e temporal de um modelo de mesoescala (Mesoscale Modeling System), com resolução espacial de 0,2º e resolução temporal de 1 e 6 horas. As estimativas de altura significativa, período de pico e direção principal de propagação do Wavewatch III, assim como as estimativas dos ventos usados como entrada, são comparadas com as medições de ondas de um radar e de um anemômetro, ambos instalados na Bacia de Campos, sudeste do Brasil. Os resultados mostram que campos de vento com maior resolução espacial têm um impacto positivo sobre a previsão das ondas. No entanto, mantendo a mesma resolução espacial e aumentando a resolução temporal, não se obtém melhores estimativas dos campos de onda.