The objective of this paper is the development of ink-jet processing as a new technique for chemical solution deposition of YBCO coatings and patterns. Our research is mainly focused on the investigation and determination of the rheological parameters towards the printability of water-based inks in order to produce continuous YBCO coatings or multi-filamentary patterns on SrTiO3 substrates. A 0.185 mol L−1YBCO ink with a viscosity of 4.77 mPa s and a surface tension of 67.9 mN m−1, resulting in a ratio Re/We1/2 of 7.37, is developed. Its printing behaviour is further verified using a camera with strobed illumination to quantify the droplet velocity and volume. After optimization of the deposition parameters, a 350 nm thick YBCO coating showing preferential c-axis orientation could be grown on SrTiO3. This layer exhibits a critical current of 0.67 MA cm−2 at 77 K in self-field. Finally, the shape and dimensions of printed YBCO tracks were determined using optical microscopy and non-contact profilometry, showing 200 nm thick and 200 μm wide tracks.
13 January 2003 in Superconductor Science and Technology
We discuss the results of a study of MgB2 multifilamentary conductors and coated conductors from the point of view of their future dc and ac applications. The correlation between the slope of the irreversibility line induced by neutron irradiation defects and in situ structural imperfections and the critical temperature and critical current density is discussed with respect to the conductor performance and applicability. We debate the possible origin of the observed anomalous decrease of ac susceptibility at 50 K in copper clad in situ powder-in-tube MgB2 wires. Different conductor preparation methods and conductor architectures, and attainable critical current densities are presented. Some numerical results on critical currents, thermal stability and ac losses of future MgB2 multifilamentary and coated conductors with magnetic cladding of their filaments are also discussed.
11 May 2018 in Superconductor Science and Technology
A detailed mechanistic model for solid oxide electrolyte direct carbon fuel cell (SO-DCFC) is developed while considering the thermo-chemical and electrochemical elementary reactions in both the carbon bed and the SOFC, as well as the meso-scale transport processes within the carbon bed and the SOFC electrode porous structures. The model is validated using data from a fixed bed carbon gasification experiment and the SO-DCFC performance testing experiments carried out using different carrier gases and at various temperatures. The analyzes of the experimental and modeling results indicate the strong influence of the carrier gas on the cell performance. The coupling between carbon gasification and electrochemical oxidation on the SO-DCFC performance that results in an unusual transition zone in the cell polarization curve was predicted by the model, and analyzed in detail at the elementary reaction level. We conclude that the carbon bed physical properties such as the bed height, char conversion ratio and fuel utilization, as well as the temperature significantly limit the performance of the SO-DCFC.National Natural Science Foundation (China) (20776078)National Natural Science Foundation (China) (51106085)Low Carbon Energy University Alliance (LCEUA) (Seed Funding
1 January 2003 in Physica C: Superconductivity and its Applications