The effect of solid oxide fuel cell cathode microstructure modification on its electrochemical activity is investigated. Inkjet printing infiltration was u
An important segment of the future renewable energy economy is the implementation of novel energy generation systems. Such electrochemical systems are solid oxide fuel cells, which have the advantage of direct conversion of the chemical energy stored in the fuel to electrical energy with high efficiency. Improving the performance and lowering the cost of solid oxide fuel cells (SOFCs) are strongly dependent on finding commercially viable methods for nano-functionalization of their electrodes via infiltration. Inkjet printing technology was proven to be a feasible method providing scalability and high-resolution ink delivery. LaxSr1−xCoyFe1−yO3−δ cathodes were modified using inkjet printing for infiltration with two different materials: Gd-doped ceria (CGO) commonly used as ion-conductor and La0.6Sr0.4CoO3–δ (LCO) commonly used as a mixed ionic electronic conductor. As-modified surface structures promoted the extension of the three-phase boundary (TPB) and enhanced the mechanisms of the oxygen reduction reaction. Electrochemical impedance measurements revealed significantly lowered polarization resistances (between 2.7 and 3.7 times) and maximum power output enhancement of 24% for CGO infiltrated electrodes and 40% for LCO infiltrated electrodes.
1 March 2002 in Superconductor Science and Technology
Pulsed laser depositions of double-buffer and triple-buffer YBa2Cu3O7−y (YBCO)/Y2O3(YSZ)/CeO2 heterostructures have been performed in situ onto commercially available biaxially textured NiFe 50%/50% tape. The deposition in the forming gas (4% H2/Ar) from a CeO2 target and the deposition in vacuum from a CeO2:Pd composite target have been explored as two possible routes for cube-on-cube growth of the first buffer layer. The influence of the critical processing parameters on the texture is investigated and some of the issues involved in the reduction of NiO (111) and the formation of cube-on-cube NiO (200) growth are discussed. X-ray diffraction has been used for texture evaluation of the substrate and subsequent deposited layers. The substrate–buffer interface region has been studied by focused ion beam cross section electron microscopy. Both the buffers and YBCO layers show biaxial alignment with ω and scans having optimum YBCO full width at half maximum (FWHM) values of 4.3° and 8.8°, respectively. The morphology has been characterized using atomic force microscopy and scanning electron microscopy. The value of Tc (onset) has been measured at 90 K (ΔTc = 10 K). The critical current density, Jc, has been measured by transport measurements and magnetic measurements performed in a dc SQUID magnetometer.
The synergistic effect of cobalt oxide and Gd-CeO2 dual infiltration on SrO segregation in LSCF/CGO cathodes via commercial inkjet printing infiltration.
31 July 2015 in Materials for Renewable and Sustainable Energy
Porous metal supports for SOFC applications were produced via conventional powder metallurgy routes—tape casting and high-pressure injection moulding. The supports were sintered in vacuum at different vacuum levels and temperatures. Commercially accessible low-cost stainless steel 430L powder was chosen as source material. The relations between the vacuum sintering temperature and the supports properties were studied. The density and the open porosity distribution of sintered supports were determined by Archimedes’ method, Optical Image Analysis and Hg-porosimetry. The microstructure and the stainless steel grain surface composition evolution were investigated by scanning electron microscope and energy dispersive X-ray spectrometry. direct ceramic inkjet printing (DCIJP) was employed as coating technology for depositing anode (NiO/GDC) and electrolyte GDC coatings. Suspension anode and electrolyte inks were developed in-house and the printing procedure was optimized to produce uniform coatings with thicknesses below 15 µm. The analyses confirmed that the as-produced substrates were suitable to support DCIJP deposited SOFC functional coatings.
1 January 2003 in Physica C: Superconductivity and its Applications