The low-fidelity simulation method cannot meet the requirements for predicting the performance of an adaptive cycle engine (ACE), especially when considering tip clearance variations in the compression and expansion systems. The tip clearances of the components of an ACE, such as the adaptive fan and turbine, vary drastically under different operating conditions. Though the tip clearance significantly impacts the engine’s performance, including its thrust and fuel consumption, variations in tip clearance are not considered in traditional ACE simulation models. This paper developed a new integrated model for predicting ACE performance, including multi-fidelity simulation models of the components and a newly developed, simplified model for predicting tip clearance. Specifically, the integrated model consists of a zero-dimensional (0D) engine performance simulation model, a three-dimensional (3D) adaptive fan numerical simulation model, a one-dimensional (1D) low-pressure-turbine (LPT) mean line model, and a multi-dimensional (MD) tip clearance prediction model. The integrated model solved the problem of considering the impact of tip clearance on an ACE and further improved the accuracy of thrust and fuel consumption predictions. Specifically, considering variations in the tip clearances under the design conditions, the differences in the thrust and specific fuel consumption (SFC) of the ACE are 1% and 0.3%, respectively. In conclusion, the integrated model provides a useful tool for evaluating the performance of an ACE while considering tip clearance variations.
The motivation to design a more efficient and compact aircraft engine leads to a continuous increase in overall pressure ratio and decrease in the stage number in compressors. Compared to the traditional multi-stage compressor, a single-stage ultra-high-pressure-ratio centrifugal compressor with a pressure ratio higher than 10.0 can significantly improve the engine’s power-to-weight ratio and fuel economy with a reduced structure complexity. Thus, it has great potential to be adopted in the compression system of advanced aero engines, such as turboshaft engines, in the future. However, the highly narrow Stable Flow Range (SFR) of ultra-high-pressure-ratio centrifugal compressors is a severe restriction for engineering applications. This research focuses on the aerodynamic performance of a ultra-high-pressure-ratio centrifugal compressor, and three-dimensional simulation is employed to investigate the effect of Self-Recirculating Casing Treatment (SRCT) on the performance and stability of the centrifugal compressor. Firstly, the parametric model of SRCT is established to investigate the effect of geometry parameters (rear slot distance and rear slot width) on the aerodynamic performance of the centrifugal compressor. It is concluded that SRCT improves the compressor’s SFR but deteriorates its efficiency. Also, a non-linear and non-monotone relationship exists between the SFR and rear slot distance or width. Then, the flow mechanism behind the effect of SRCT is explored in detail. By introducing the SRCT, an additional flow path is provided across the blade along the circumferential direction, and the behavior of the shock wave and tip leakage flow is significantly changed, resulting in the obviously different loading distribution along the streamwise direction. As a result, the mixing and flow separation loss are enhanced in the impeller flow passage to deteriorate the efficiency. On the other hand, the blockage effect caused by the mixing of slot recirculation and mainstream flow near the impeller inlet increases the axial velocity and reduces the incidence angle below the 90% spanwise section, which is considered to effectively stabilize the impeller flow field and enhance the stability.
28 November 2022 in Journal of Engineering for Gas Turbines and Power
Multistage compressors are widely used in aero-engines, gas turbines, and industrial compressors. However, many inevitable geometric/condition uncertainties will lead to low manufacturing qualified rate and severe performance degradation of multistage compressors. There might be hundreds of uncertainty variables simultaneously, so the “curse of dimensionality” problem has seriously constrained the uncertainty quantification (UQ) study in multistage compressors. In this paper, a feature selection method based on interpretable machine learning and bidirectional search is developed to reduce the dimensionality in a multistage compressor UQ study. The method is applied to a three-stage compressor and reduces the uncertainties dimensionality from 292 to 41 and 66 for mass flow rate and efficiency prediction. Consequently, the required sample size is reduced from 1674 to 160 with the model accuracy almost unchanged. For the first time, this study realizes the UQ modeling study on the high dimensional problem of a multistage compressor. In addition, significant stage-by-stage uncertainty propagation is found in the compressor. The last stage has the most significant efficiency deviation, which is significantly affected by the geometric uncertainty of the first two stages. Therefore, traditional studies, which usually simplify the multistage compressor UQ problem to a single cascade/row level, may seriously underestimate the uncertainty effect due to the neglect of stage-by-stage propagation. This study not only reveals the necessity for direct UQ study of multistage compressors but also reduces the computational cost, which lays a foundation for the uncertainty control of multistage compressors in engineering practice.