Optimization algorithms in the compressor detailed design stage generate big data of geometries and corresponding performances, but these data are often not exploited efficiently to unveil hidden compressor design guidance. In this work, the Shapley additive explanations (SHAP) method from game theory is proposed as an efficient methodology to extract design guidelines from databases. A database was generated when optimizing the blade features (sweep, lean, and end-bend) of Rotor 37. Based on this, a neural network is trained to predict compressor efficiency. The SHAP method is then applied to explain the neural network behavior, which provides information on the sensitivity of single geometrical variables and the coupling effect between multiple geometrical variables. Results show that the near-tip sweep and midspan lean angles are most influential on efficiency. Within the same group of variables, the adjacent variables tend to present strong positive coupling effects on efficiency. Among different groups, evident coupling effects are observed between sweep and lean and between lean and end-bend, but the coupling effect between sweep and end-bend is negligible. Flow mechanisms behind the coupling effects are discussed. For near-tip lean angles L3 and L4, the positive coupling effect is due to the change of the passage shock. For near-tip lean angle L4 and sweep angle S4, the change of detached shock leads to a negative coupling effect. The proposed data mining method based on the neural network and SHAP is promising and transferable to other turbomachinery optimization databases in the future.
18 September 2023 in Aerospace Science and Technology
The low-fidelity simulation method cannot meet the requirements for predicting the performance of an adaptive cycle engine (ACE), especially when considering tip clearance variations in the compression and expansion systems. The tip clearances of the components of an ACE, such as the adaptive fan and turbine, vary drastically under different operating conditions. Though the tip clearance significantly impacts the engine’s performance, including its thrust and fuel consumption, variations in tip clearance are not considered in traditional ACE simulation models. This paper developed a new integrated model for predicting ACE performance, including multi-fidelity simulation models of the components and a newly developed, simplified model for predicting tip clearance. Specifically, the integrated model consists of a zero-dimensional (0D) engine performance simulation model, a three-dimensional (3D) adaptive fan numerical simulation model, a one-dimensional (1D) low-pressure-turbine (LPT) mean line model, and a multi-dimensional (MD) tip clearance prediction model. The integrated model solved the problem of considering the impact of tip clearance on an ACE and further improved the accuracy of thrust and fuel consumption predictions. Specifically, considering variations in the tip clearances under the design conditions, the differences in the thrust and specific fuel consumption (SFC) of the ACE are 1% and 0.3%, respectively. In conclusion, the integrated model provides a useful tool for evaluating the performance of an ACE while considering tip clearance variations.
11 March 2024 in Journal of Engineering for Gas Turbines and Power
Aerodynamic instability plays an important role in compressor design and may cause performance degradation and fatigue damage. In this paper, an experimental study on the evolution of aerodynamic instability is carried out on a compressor that combines the performance benefits of an axial stage and centrifugal stage. The spatiotemporal characteristics of unsteady wall pressure were obtained using fast-responding pressure transducers over a range of operating conditions. The results show that the axial stage works on the positive slope of the performance characteristic curve from choke to stall at low-speed operating conditions, and mainly features rotating instability. Rotating stall is also observed in the impeller (IMP) and diffuser passages. At medium-speed operating conditions, the centrifugal stage suffers a high-frequency mild surge, alternating with rotating stall. With the increase in back pressure, the mild surge diminishes, and rotating stall persists. This behavior is similar to a two-regime-surge, which has been reported for centrifugal compressors. At high-speed operating conditions, the compressor directly reaches surge without other instabilities. Further analysis of the spatial pattern of the rotating stall revealed the existence of a high-pressure region near the volute tongue, resulting in obvious pressure distortion along the circumferential direction at the volute inlet. This induced the amplitude difference of stall cells in corresponding diffuser passages. The disturbance caused by stall cells propagates upstream through the blade passage, and the largest pressure disturbance induced by the stall cell propagation appears in a circumferential position 45 deg downstream of the volute tongue at the impeller inlet and the axial stage inlet.