Ashish Pal

Mr. Ashish Pal

Civil and Environmental Engineering, Rice University, Houston, Texas, USA
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

3 July 2022 in Scientific Reports
Verified
Journal Article
Open access
PDF file
WMWei Meng
Wei Meng
APAshish Pal
Ashish Pal
SBSergei M. Bachilo
Sergei M. Bachilo
RWR. Bruce Weisman
R. Bruce Weisman
SNSatish Nagarajaiah
Satish Nagarajaiah
This study reports next generation optical strain measurement with “strain-sensing smart skin” (S4) and a comparison of its performance against the established digital image correlation (DIC) method. S4 measures strain-induced shifts in the emission wavelengths of single-wall carbon nanotubes embedded in a thin film on the specimen. The new S4 film improves spectral uniformity of the nanotube sensors, avoids the need for annealing at elevated temperatures, and allows for parallel DIC measurements. Noncontact strain maps measured with the S4 films and point-wise scanning were directly compared to those from DIC on acrylic, concrete, and aluminum test specimens, including one with subsurface damage. Strain features were more clearly revealed with S4 than with DIC. Finite element method simulations also showed closer agreement with S4 than with DIC results. These findings highlight the potential of S4 strain measurement technology as a promising alternative or complement to existing technologies, especially when accumulated strains must be detected in structures that are not under constant observation.


1 July 2021 in Journal of Structural Engineering
Verified
Journal Article
Closed access
PDF file
APAshish Pal
Ashish Pal
VGVinay K. Gupta
Vinay K. Gupta
The seismic safety of acceleration-sensitive secondary elements rigidly connected to the primary structure can be ensured in the case of ordinary structures by simply and accurately estimating the largest peaks in the floor accelerations consistent with a given seismic hazard. A new modal combination rule is developed in this study to estimate the peak floor accelerations in the case of lumped mass, classically damped, multistoried structures. The formulation is based on stationary random vibration theory and the use of nonstationary peak factors together with the amplitudes of the specified design spectra. The proposed formulation is supported by the development of (1) an expression for estimating the peak factor for floor acceleration from the peak factors for modal displacement responses and peak modal contributions to the peak floor response, wherein both floor acceleration and modal peak factors are normalized by the (nonstationary) peak factor for input ground acceleration, and (2) a two-parameter power function for estimating the normalized modal peak factors for relative velocity from the oscillator period, together with the scaling equations for the two parameters in terms of ground-motion characteristics. A numerical study using five example buildings and six example ground motions shows that the proposed modal combination rule works well, with the absolute error averaged over all floors of the structure being less than 10% for 90% of the cases. Also, the proposed rule works better compared to when various peak factors are taken to be identical.

26 August 2023 in Sensors
Verified
Journal Article
Open access
PDF file
APAshish Pal
Ashish Pal
WMWei Meng
Wei Meng
SNSatish Nagarajaiah
Satish Nagarajaiah
Structures in their service life are often damaged as a result of aging or extreme events such as earthquakes or storms. It is essential to detect damage in a timely fashion to ensure the safe operation of the structure. If left unchecked, subsurface damage (SSD) can cause significant internal damage and may result in premature structural failure. In this study, a Convolutional Neural Network (CNN) has been developed for SSD detection using surface strain measurements. The adopted network architecture is capable of pixel-level image segmentation, that is, it classifies each location of strain measurement as damaged or undamaged. The CNN which is fed full-field strain measurements as an input image of size 256 × 256 projects the SSD onto an output image of the same size. The data for network training is generated by numerical simulation of aluminum bars with different damage scenarios, including single damage and double damage cases at a random location, direction, length, and thickness. The trained network achieves an Intersection over Union (IoU) score of 0.790 for the validation set and 0.794 for the testing set. To check the applicability of the trained network on materials other than aluminum, testing is performed on a numerically generated steel dataset. The IoU score is 0.793, the same as the aluminum dataset, affirming the network’s capability to apply to materials exhibiting a similar stress–strain relationship. To check the generalization potential of the network, it is tested on triple damage cases; the IoU score is found to be 0.764, suggesting that the network works well for unseen damage patterns as well. The network was also found to provide accurate predictions for real experimental data obtained from Strain Sensing Smart Skin (S4). This proves the efficacy of the network to work in real-life scenarios utilizing the full potential of the novel full-field strain sensing methods such as S4. The performance of the proposed network affirms that it can be used as a non-destructive testing method for subsurface crack detection and localization.

26 August 2025 in Mechanical Systems and Signal Processing
Verified
Journal Article
Closed access
APAshish Pal
Ashish Pal
SBSutanu Bhowmick
Sutanu Bhowmick
SNSatish Nagarajaiah
Satish Nagarajaiah