This paper presents a micromechanics-based 3D finite element model for predicting the damage initiation, propagation, and failure strength of TC33/Epoxy carbon fiber reinforced polymer (CFRP) unidirectional lamina under biaxial loadings. The finite element model is generated by introducing representative volume element (RVE) with a random distribution of fibers and a non-zero thickness, numerically identified interface phase via cohesive elements. In the finite element model, the carbon fibers are considered as elastic, while the elasto-plastic behavior and damage of the matrix are governed by extended Drucker–Prager plastic yielding model and ductile damage criterion. By imposing periodic boundary conditions to the RVEs, various cases subjected to uniaxial and biaxial loading conditions are carried out. During the combined transverse and in-plane shear stress states, a failure transition from compression- or tension-dominated to shear-dominated is captured, and the effects of the interfacial strength on the transition damage mechanisms are discussed. The corresponding failure locus is compared with the upper bound and lower bound predictions of three phenomenological failure criteria (Hashin, Tasi–Wu, and Puck failure criteria) for composites. It was found that in the interface-dominated failure of a CFRP lamina with a weak interface, the Hashin failure criterion performs best among the currently popular failure criteria. However, in the matrix-dominated failure with a strong interface, the Puck failure criterion performs best. Comparing these three criteria, it can be seen the Tsai–Wu may be generally better than both of others as it presents more neutral predictions in both of the examined cases.
1 August 2015 in Simulation Modelling Practice and Theory
This paper presents a new numerical approach for modelling the 3D printing process of fibre reinforced polymer composites by fused deposition modelling (FDM). The approach is based on the coupling between two particle methods, namely smoothed particle hydrodynamics (SPH) and discrete element method (DEM). The coupled SPH-DEM model has distinctive advantages in dealing with the free surface flow, large deformation of fibres, and/or fibre-fibre interaction that are involved in the FDM process. A numerical feasibility study is carried out to demonstrate its capability for both short and continuous fibre reinforced polymer composites, with promising results achieved for the rheological flow and fibre orientation and deformation.