Significance: An invisibility cloak to conceal objects from an outside observer has long been a subject of interest in metamaterial design. While cloaks have been manufactured for optical, thermal, and electric fields, limited progress has been made for mechanical cloaks. Most existing designs rely on mapping-based methods, which have so far been limited to special base cells and a narrow selection of voids with simple shapes. In this study, we develop a fundamentally different approach by exploiting data-driven designs to offer timely, customized solutions to mechanical cloaking that were previously difficult to obtain. Through simulations and experimental validations, we show that excellent cloaking performance can be achieved for various boundary conditions, shapes of voids, base cells, and even multiple voids.
This paper presents a micromechanics-based 3D finite element model for predicting the damage initiation, propagation, and failure strength of TC33/Epoxy carbon fiber reinforced polymer (CFRP) unidirectional lamina under biaxial loadings. The finite element model is generated by introducing representative volume element (RVE) with a random distribution of fibers and a non-zero thickness, numerically identified interface phase via cohesive elements. In the finite element model, the carbon fibers are considered as elastic, while the elasto-plastic behavior and damage of the matrix are governed by extended Drucker–Prager plastic yielding model and ductile damage criterion. By imposing periodic boundary conditions to the RVEs, various cases subjected to uniaxial and biaxial loading conditions are carried out. During the combined transverse and in-plane shear stress states, a failure transition from compression- or tension-dominated to shear-dominated is captured, and the effects of the interfacial strength on the transition damage mechanisms are discussed. The corresponding failure locus is compared with the upper bound and lower bound predictions of three phenomenological failure criteria (Hashin, Tasi–Wu, and Puck failure criteria) for composites. It was found that in the interface-dominated failure of a CFRP lamina with a weak interface, the Hashin failure criterion performs best among the currently popular failure criteria. However, in the matrix-dominated failure with a strong interface, the Puck failure criterion performs best. Comparing these three criteria, it can be seen the Tsai–Wu may be generally better than both of others as it presents more neutral predictions in both of the examined cases.
19 February 2020 in Structural and Multidisciplinary Optimization
Carbon fiber reinforced polymer (CFRP) is widely used in machinery and construction due to their extra-ordinary mechanical properties. Up to now, conventional drilling is the most common machining process to facilitate holes on CFRP laminates for the component assembly. However, drilling-induced delamination is widely considered as the most undesirable damage and challenging failure mode in this process. The present paper aims to propose a convenient and quick method to predict the mechanical properties of open-hole laminated plain woven CFRP composites more accurately. First, the delamination results of nondestructive test by C-scan and simulation were compared after practical experiment and numerical simulation of drilling process. Second, an equivalent parameter was proposed to simplify the delamination regions with complex boundaries, and the mechanical property evaluation model was constructed by introducing the initial delamination damage area, which was obtained from the drilling numerical simulation results. Finally, the effectiveness of the proposed method was demonstrated by analyzing the mechanical properties and failure modes of CFRP with processing delamination damage under loading conditions of tension, compression and bending. Therefore, the proposed method in this paper can help understand the degradation mechanism of composites after drilling and provide guidance for the design of open-hole laminated plain woven CFRP composites.