It has been investigated whether explosive electron emission may be the initiating mechanism of vacuum breakdown in the accelerating structures of TeV linear electron-positron colliders (Compact Linear Collider). The physical processes involved in a dc vacuum breakdown have been considered, and the relationship between the voltage applied to the diode and the time delay to breakdown has been found. Based on the results obtained, the development of a vacuum breakdown in an rf electric field has been analyzed and the main parameters responsible for the initiation of explosive electron emission have been estimated. The formation of craters on the cathode surface during explosive electron emission has been numerically simulated, and the simulation results are discussed.
The results of experiments with exploding copper conductors, performed on the MIG facility (providing currents of amplitude of about 2.5 MA and rise time of 100 ns), are analyzed. With an frame optical camera, large-scale instabilities of wavelength 0.2–0.5 mm were detected on the conductor surface. The instabilities show up as plasma “tongues” expanding with a sound velocity in the opposite direction to the magnetic field gradient. Analysis performed using a two-dimensional MHD code has shown that the structures observed in the experiments were formed most probably due to flute instabilities. The growth of flute instabilities is predetermined by the development of thermal instabilities near the conductor surface. The thermal instabilities arise behind the front of the nonlinear magnetic diffusion wave propagating through the conductor. The wavefront on its own is not subject to thermal instabilities.
To gain a better understanding of the operation of atmospheric pressure air discharges, the formation of a runaway electron beam at an individual emission site on the cathode has been numerically simulated. The model provides a description of the dynamics of the fast electrons emitted into an air gap from the surface of the emission zone by solving numerically two-dimensional equations for the electrons. It is supposed that the electric field at the surface of the emission zone is enhanced, providing conditions for continuous acceleration of the emitted electrons. It is shown that the formation of a runaway electron beam in a highly overvolted discharge is largely associated with avalanche-type processes and that the number of electrons in the avalanche reaches 50% of the total number of runaway electrons.
The dynamics of phase changes in the material of a copper cathode during the explosion of a microprotrusion on its surface under the action of the explosive electron emission current has been numerically simulated. Numerical data have been obtained that characterize the interaction of the liquid metal and the dense cathode plasma that are formed due to the microprotrusion explosion. It has been shown that, under the action of the pressure exerted by the plasma, the liquid metal is almost completely displaced from the zone of operation of the cathode spot of the vacuum discharge. This leads to the formation of a crater on the cathode surface with microirregularities at its edge. Thus conditions are created for the formation of new microprotrusions, which, when exploding, provide self-sustained and cyclic operation of the vacuum discharge.
Results of experiments on electrical wire explosion are presented and processes of stratum formation and decay are analyzed in this paper. A procedure of calculating the transport coefficients from the rate of stratum damping is described. It is demonstrated that values of the transport coefficients for metals are not an unambiguous function of the material state in the biphase region for characteristic times of but depend on the process prehistory.
The results of an experiment on discharges in long atmospheric pressure air gaps at a pulsed voltage of amplitude up to 800 kV and risetime 150–200 ns have been analyzed. In the experiment, a radiation pulse of photon energy >5 keV and duration 10–20 ns was observed. In analyzing the experimental data it was supposed that a streamer is a plasma protrusion whose surface is equipotential to the cathode surface. It has been shown that the x-ray pulse results from the switch of electrons into the mode of "runaway" from the head of anode-directed streamers. For the electrons injected in the electrode gap from the streamer head, conditions for their switching into the mode of continuous acceleration are realized due to the enhanced electric field at the head. The predicted maximum of the spectrum of the bremsstrahlung generated by the runaway electron beam is around 15 keV. The presence of a maximum in the bremsstrahlung spectrum is due to that the photons emitted by electrons are absorbed by atoms of the gas in which the discharge operate.