The combination of high strength and good ductility are very desirable for advanced structural and functional applications. However, measures to enhance strength typically lead to ductility reduction due to their inverse correlation, nano-grained structures for an instance. Bi-modal grain structure is promising in this regard, but its realization is limited by multiple complex processing steps. Here, we demonstrate a facile single-step processing route for the development of bimodal grain structure in austenitic stainless steel, SS316L. The bimodal structure comprised of fine martensite grains (<500 nm) sandwiched between coarse austenite grains (~10 µm). The dual-phase bimodal structure demonstrated higher yield strength (~620 MPa) compared to ultra-fine grain structure (~450 MPa) concurrent with high uniform tensile ductility (~35%). These exceptional properties are attributed to unique dual-phase, bimodal grain structure which delayed the onset of plastic instability resulting in higher strength as well as larger uniform elongation and work-hardening rate. Our approach may be easily extended to a wide range of material systems to engineer superior performance.
Metallic glasses have many fascinating properties such as theoretical-limit approaching strength, high wear and corrosion resistance, and extremely smooth surfaces enabling high-performance thin film diodes. Copper-based metallic glasses are of particular interest due to the low cost and attractive characteristics of the base element, but the copper-based metallic glasses known to date rely on rare-earth or precious metals that have limited supplies and relatively high cost, in order to achieve good glass-forming ability. Here, we report our discovery of a series of rare-earth and precious-metal free copper-based metallic glasses formulated as Cu46Zr47−xHfxAl7 (8 ≤ x ≤ 20, at. %), which possess superior glass-forming ability and processability. Fully amorphous ingots with a large cross section of 15 (all x) to 28.5 mm (x = 13.5) diameter can be readily produced by a simple water quenching method. The Cu46Zr33.5Hf13.5Al7 alloy, in particular, presents the highest glass-forming ability and processability of all known copper-based metallic glasses. The adjustable Hf content in the composition offers a range of physical properties (e.g., density) that can be chosen based on applications. We also discuss the physical origin of the superior glass-forming ability and processability in these copper-based metallic glasses.
7 June 2017 in European Journal of Cardio-Thoracic Surgery
OBJECTIVES: Pulmonary arterial hypertension (PAH) is associated with poor outcome after mitral valve replacement (MVR). We proposed to evaluate the effect of valve prosthesis patient mismatch (PPM) on pulmonary arterial (PA) pressure following MVR. METHODS: Five hundred patients who have undergone MVR were studied retrospectively. Postoperative PA systolic pressure (PASP) measured 6 months postoperatively by Doppler echocardiography was compared with preoperative values. PASP ≥ 40 mmHg was defined as PAH. Mitral valve effective orifice area was calculated by the continuity equation and indexed for body surface area. PPM was defined as indexed effective orifice area ≤ 1.2 cm2/m2. A multivariate model was constructed to ascertain the independent determinants of systolic PA pressure. Also, a propensity score model was constructed to overcome the baseline differences between the PPM and no PPM groups. RESULTS: The incidence of PPM in this study was 37.2%. The average postoperative PASPs were 30.49 and 42.35 mmHg in the no PPM and PPM groups, respectively; (P < 0.001). Regression of PAH in the PPM and no PPM groups was 76.26% and 20.64%, respectively; (P < 0.001). The indexed effective orifice area correlated well with postoperative PASP (r = 0.71). The overall survival and freedom from cardiac death at 10 years were 79.8% and 85.3%; and at 20 years were 66.5% and 74.3%, respectively. Both, overall survival and the freedom from cardiac death were higher in the no PPM group than in the PPM group; (P < 0.001). Propensity score matching analysis yielded 112 pairs of the PPM and no PPM cohorts, which revealed higher overall survival and freedom from cardiac death in the no PPM group; (P = 0.028 and 0.012, respectively). CONCLUSIONS: Mitral PPM is an independent predictor of persistent PAH after MVR along with associated morbidity and reduced survival.
1 January 2022 in Journal of Materials Research and Technology