Yan Xu

Prof. Yan Xu


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 July 2024 in Polymers
Verified
Journal Article
Open access
PDF file
ZJZhengyang Jin
Zhengyang Jin
SWSuiyan Wei
Suiyan Wei
WJWenyang Jin
Wenyang Jin
BLBingheng Lu
Bingheng Lu
YXYan Xu
Yan Xu
This study aimed to develop Janus-, cross-network-, and coaxial-structured piezoelectric–conductive polymer nanofibers through electrospinning to mimic the piezoelectricity of bone and facilitate the conduction of electrical signals in bone tissue repair. These nanofibers were constructed using the piezoelectric polymer polyvinylidene fluoride, and the conductive fillers reduced graphene oxide and polypyrrole. The influence of structural features on the electroactivity of the fibers was also explored. The morphology and components of the various structural samples were characterized using SEM, TEM, and FTIR. The electroactivity of the materials was assessed with a quasi-static d33 meter and the four-probe method. The results revealed that the piezoelectric–conductive phases were successfully integrated. The Janus-structured nanofibers demonstrated the best electroactivity, with a piezoelectric constant d33 of 24.5 pC/N and conductivity of 6.78 × 10−2 S/m. The tensile tests and MIP measurements showed that all samples had porosity levels exceeding 70%. The tensile strength of the Janus and cross-network structures exceeded that of the periosteum (3–4 MPa), with average pore sizes of 1194.36 and 2264.46 nm, respectively. These properties indicated good mechanical performance, allowing material support while preventing fibroblast invasion. The CCK-8 and ALP tests indicated that the Janus-structured samples were biocompatible and significantly promoted the proliferation of MC3T3-E1 cells.

28 April 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
YBYang Bao
Yang Bao
RXRuilei Xue
Ruilei Xue
JZJianping ZHOU
Jianping ZHOU
HLHongsheng Liu
Hongsheng Liu
YXYan Xu
Yan Xu
Thick-walled X80 pipelines for oil and gas transportation are difficult to relocate due to their large size. In the process of narrow-gap overhead welding, welding defects, such as bulges and lack of sidewall fusion, can appear easily. To avoid these defects and to improve the welding quality of thick-walled pipelines, the GMAW welding method is adopted in this paper. The formation characteristics of the weld and the influence of arc oscillation parameters, such as the oscillation width and sidewall dwell time, on the formation process of narrow-gap overhead welding seams are studied. In this research, it was found that, in the NG-GMAW overhead welding position, there was a downward trend in the middle of the formed surface of the weld pool. Defects, such as finger-shaped penetrations and lack of sidewall fusion, were prone to occur due to gravity. The increased oscillation width was beneficial for reducing the protrusion in the middle of the weld seam, but an excessive oscillation width can easily cause undercut defects. The sidewall dwell time has little effect on the protrusion in the middle of the weld seam, but it can increase sidewall penetration, thereby avoiding the occurrence of incomplete sidewall penetration.

3 June 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HLHongsheng Liu
Hongsheng Liu
RXRuilei Xue
Ruilei Xue
JZJianping ZHOU
Jianping ZHOU
YBYang Bao
Yang Bao
YXYan Xu
Yan Xu
Vertical oscillation arc welding for narrow gap gas metal arc welding (NG-GMAW) has a relatively simple structure, and it is widely used in all-position pipeline field welding. However, it has some shortcomings, such as incomplete fusion defects on the sidewall and interlayer. Aiming at resolving these shortcomings, a mathematical model is proposed to obtain appropriate welding parameters in different positions. In this model, the response surface methodology (RSM) based on the central composite design (CCD) was developed to study the interactions between welding parameters and the weld bead geometry. Then the analysis of variance (ANOVA) was used to evaluate the accuracy and significance of the proposed model. Finally, experiments were carried out in flat, vertical, and overhead positions to obtain the optimal parameters. The macroscopic metallography of the transversal section of the weld bead under the optimizing welding parameters showed that the weld beads were free of defects in the sidewall and interlayers.

16 May 2022 in International Journal of Polymeric Materials and Polymeric Biomaterials
Verified
Journal Article
Closed access
ZJZhengyang Jin
Zhengyang Jin
BLBingheng Lu
Bingheng Lu
YXYan Xu
Yan Xu
The process of bone tissue repair and regeneration must occur in a suitable electrical microenvironment, which is one of the most important microenvironments. Electroactive materials appropriately simulate the bioelectric nature of bone and provide the electrical microenvironment required for bone repair, which accelerates bone repair and regeneration. The concept of electrical stimulation-induced osteogenesis promotes the development of electroactive materials as orthopedic implants. This article reviews the general bioelectric phenomena in organisms and the electrical response of natural bone, and briefly explains the promotion of bone regeneration by the electrical microenvironment. Electroactive materials in the field of bone tissue engineering are divided into two categories, such as piezoelectric polymers and conductive polymers, and the material properties, research progress, and applications of each will be described in detail. This article analyzes the limitations of piezoelectric and conductive materials for constructing an electrical microenvironment, reveals the potential of these two materials for overcoming the application limitations of a single type of electroactive material, and discusses the principles. The future challenges and developmental prospects of electroactive materials are discussed. This review comprehensively emphasizes the important characteristics of electroactive biomaterials and points out the direction of development for composite applications of different electroactive materials. Graphical Abstract

1 January 2023 in Processing and Application of Ceramics
Verified
Journal Article
Open access
PDF file
ZJZhengyang Jin
Zhengyang Jin
BLBingheng Lu
Bingheng Lu
YXYan Xu
Yan Xu
XZXujing Zhang
Xujing Zhang
Experimental evidence shows that natural bone is piezoelectric, and bioelectric phenomena in natural bone play an essential role in bone development and bone defect repair. Piezoelectric ceramics can deform with physiological movements and consequently deliver electrical stimulation to cells or damaged tissue without the need for an external power source. They exhibit piezoelectricity and good biological properties similar to those of natural bone and have shown great potential in bone tissue engineering. This study aims to present an overview of the relationship between electrical stimulation and bone repair as well as the principle of the piezoelectric effect, emphasizing the material characteristics, research progress and application of piezoelectric ceramics in bone tissue regeneration. The limitations of piezoelectric ceramics in promoting osteogenesis by electrical stimulation were also analysed. Overall, this review comprehensively emphasized the essential characteristics of piezoelectric ceramics and pointed out the new direction for the future development of piezoelectric ceramics.

18 June 2023 in Machines
Verified
Journal Article
Open access
PDF file
DWDi Wang
Di Wang
HWHui Wang
Hui Wang
YXYan Xu
Yan Xu
JZJianping ZHOU
Jianping ZHOU
XSXinyu Sui
Xinyu Sui
Wheeled machines, such as agricultural tractors, snowplows, and wheeled mobile robots, usually work on icy or snow-covered roads. Therefore, it is very important to study the driving and slip resistance of the tires of these machines. In this paper, we investigate the driving behavior of tires on snow-covered terrain by means of numerical simulations. A high-fidelity snow-covered road model is established, and smoothed particle hydrodynamics (SPH) and the finite element method (FEM) are employed to account for the behaviors of the snow layers and the pavement, respectively. We use the node-to-surface algorithm for the contact interactions between the snow and the pavement. The SPH parameters for the snow are calibrated by means of a triaxial compression experiment. A simplified tire model is established as well, using the FEM, and the effectiveness of the model is demonstrated via comparisons with the experimental data in terms of stiffness. Finally, the tire driving performance on the snow-covered road is simulated, and the influence of the tire surface configuration, external load, inflation pressure, and snowpack compression on the tire traction behaviors is systematically investigated.