A novel single-fed horizontally polarized pattern-reconfigurable antenna is proposed with the key feature that is highly pattern-reconfigurable. The antenna is able to generate a large variety of radiation patterns, including omnidirectional, single-directive, and multi-beam patterns without using phase shifters. The antenna is based on a planar geometry, which consists of an Alford loop and four compact parasitic pixel rings with 60 integrated controlling units utilizing p-i-n diodes. Experimental and simulation results are provided for the proposed antenna design operating at 5 GHz. The results show that the single-beam steering with 7.3 dBi gain through 360° in the azimuth plane is achieved. Moreover, flexible dual-beam steering with one beam fixed and the other beam scanning independently among 360° in the azimuth plane is also demonstrated where each beam has 5 dBi gain. Other radiation modes, such as the omnidirectional mode, the tri-beam-steering mode, and the elevation plane steering mode, are also verified. The features of high pattern reconfigurability, 360° single-beam- and multi-beam-steering ability, full 3-D space scanning, planar geometry, and compatibility with a digital controller make it useful in various sub-6 GHz wireless applications, such as wireless power transfer, RF sensing, and analog precoding.

The combination of communication and sensing is envisioned as a novel feature in the forthcoming sixth-generation (6G) wireless communication. The conventional approach to the joint sensing and communication (JSAC) system is utilizing one base station (BS) as both a sensing transmitter and a sensing receiver, which is known as monostatic sensing. However, the resulting self-interference issue requires additional hardware promotion to achieve full-duplexing. To overcome this issue, in this paper, we focus on cooperative sensing where the transmitter and receivers are non-co-located, which includes the bistatic and multistatic sensing. Specifically, the system model of cooperative sensing based on mobile networks is established. To demonstrate the feasibility of cooperative sensing, the bistatic radar cross section (RCS) is provided. As for the sensing method, a refined orthogonal matching pursuit (R-OMP) method is proposed to estimate the channel parameters and data fusion is also provided to derive the objects’ positions and velocities. Considering the non-negligible interference in the cooperative JSAC networks, we also discuss interference management in this paper. Simulation results show that the proposed cooperative sensing system improves the position and velocity estimation accuracy by over 20% when compared with monostatic sensing. The preliminary experiment results also verify the feasibility of the proposed system.

A millimeter-wave (mmWave) antenna with beam steering capability and a single feed is introduced. Fifth-generation (5G) systems with a single feed or a single radio frequency (RF) chain can provide inexpensive and energy-efficient solutions in applications such as the Internet of Things. The antenna consists of a half-wavelength dipole with a balun structure printed on both sides of a substrate and a parasitic pixel surface in front of the dipole. The antenna achieves beam-steering in the azimuth plane by controlling two diodes that alter the connections in the parasitic surface. Phase shifters or multiple feeds are not required to control the beam angle and therefore the antenna can support single-RF 5G operation. By introducing proper objective functions, the connections of the parasitic surface and locations of the two diodes can be optimized with the genetic algorithm. The ground plane and dc bias lines are printed on the backside of the substrate. Simulation and experimental results show that the proposed single port pattern reconfigurable antenna can operate in the 26–30 GHz mmWave bands. The realized gain of 7.96 dBi and two radiation patterns with peak gains directed to 75 $^{\circ }$ and 110 $^{\circ }$ are verified by experiment demonstrating the feasibility of the proposed design concept.

A systematic method based on the Theory of Characteristic Modes (TCM) for finding orthogonal radiation patterns of any electronically steerable parasitic array radiator (ESPAR) is described. This method can be useful for designing single-RF front-end multiple-input multiple-output (MIMO) systems in which orthogonal patterns can be utilized as a basis set for space modulation (SM) or full multiplexed MIMO systems. The method is based on the N-port formulation of TCM and is not restricted to antenna type or array configuration. It can also provide closed formed solutions for the antenna element currents required to generate the orthogonal patterns. In addition an approach to finding the required load reactances in ESPAR for generating the orthogonal patterns is provided and is based on the quasi-Newton method utilizing a closed form expression for the initial approximate solution. Approximate estimation of the effective aerial degrees of freedom of the ESPARs is also discussed. Two simulation examples of ESPARs, a 4-element linear dipole array and an 8-element rectangular planar inverted-F antenna array, using SM as well as full multiplexed MIMO are provided, demonstrating the effectiveness of the proposed method.

A novel low-profile vertically polarized planar endfire smart antenna that can achieve 360° beam-steering and high beam-shaping capability is proposed. The microstrip antenna is printed on a single thin substrate with a vertically polarized omnidirectional driven source and 36 tunable slot-integrated microstrip vertically polarized resonators (SMVR) for shaping the endfire beams. To verify the design approach, a prototype operating at the 5 GHz WLAN band is fabricated and tested. The results show that the antenna operates from 5.55 to 5.75 GHz and is capable of scanning a single endfire beam from 0° to 360° in the full azimuth plane. The scanning resolution and the maximum realized gain are 15° and 8.2 dBi, respectively. Moreover, multiple radiation pattern shapes including omnidirectional beam, dual-beams, and tri-beams can also be generated by the antenna. The overall antenna height is only $0.06~\lambda $ at 5.6 GHz. This design provides a new antenna configuration for low-profile vertically polarized endfire beam-steering and beam-shaping antenna and is promising for future wireless communication systems with lost-cost beamforming property.

The sixth generation mobile communication system (6G) will provide everything as a service (XaaS), where X includes communication, sensing, computing, artificial intelligence (AI), big data and security, and more. Novel features, such as Sensing as a Service (SaaS), will contribute to further realizing Internet of Everything (IoE). Integrated sensing and communication (ISAC) is identified as one of the six usage scenarios for 6G by the international telecommunication union radiocommunication sector (ITU-R), and the corresponding studies on the detailed technical performance requirements and evaluation methodologies have begun in 2024. Although ISAC has become a popular topic, there are no systematic performance requirements metrics and corresponding evaluation methodologies defined for SaaS in a mobile communication system, while conventional key performance indicators (KPIs) for radar systems have been borrowed currently. Therefore, to fill this gap, this article proposes SensCAP, a systematic capability performance metric composed of sensing capacity, accuracy, and probability. The sensing capacity reflects the comprehensive sensing performance, which can be expressed as the number of targets that can be detected per unit area within unit time, given sensing Quality-of-Service (QoS) requirements consisting of sensing accuracy and probability. Furthermore, the performance evaluation of the SensCAP is conducted through system simulation using proposed evaluation methodologies, and the KPI values are suggested as the guidelines for further study in ITU-R.