In 2020, 37% of global CO2eq. emissions were attributed to the construction sector. The major effort to reduce this share of emissions has been focused on reducing the operational carbon of buildings. Recently, awareness has also been raised on the role of embodied carbon: emissions from materials and construction processes must be urgently addressed to ensure sustainable buildings. To assess the embodied carbon of a building, a life-cycle assessment (LCA) can be performed; this is a science-based and standardized methodology for quantifying the environmental impacts of a building during its life. This paper presents the comparative results of a “cradle-to-cradle” building LCA of an office building located in Luxembourg with 50 years of service life. Three equivalent structural systems are compared: a steel–concrete composite frame, a prefabricated reinforced concrete frame, and a timber frame. A life-cycle inventory (LCI) was performed using environmental product declarations (EPDs) according to EN 15804. For the considered office building, the steel–concrete composite solution outperforms the prefabricated concrete frame in terms of global warming potential (GWP). Additionally, it provides a lower GWP than the timber-frame solution when a landfill end-of-life (EOL) scenario for wood is considered. Finally, the steel–concrete composite and timber solutions show equivalent GWPs when the wood EOL is assumed to be 100% incinerated with energy recovery.
In an effort to mitigate climate change, the construction industry is moving toward a more responsible approach regarding production and design methods. The environmental impact of a structure must be reduced from the design phase by using reliable design approaches and choosing the production and construction processes that minimise as much as possible the carbon footprint. The purlins are components of the roof structure and their scope is to transfer the roof loads to the rafters. An efficient design of purlins is generally achieved by using cold-formed steel Z-shaped profiles. Z purlins span continuously over the rafters to reduce material use through a more favourable bending moment distribution. To ensure continuity of the bending moment along the length of the structure, the purlins form overlapped connections on the supports. The focus of this research paper is to assess through the Life Cycle Assessment methodology how the design influences the environmental impact of overlapped purlins. The paper assesses the impact of higher-grade steels versus more traditionally used steel grades. Furthermore, the adoption of steel manufactured using a high content of scrap steel and energy obtained from renewable sources facilitate the reduction of the carbon footprint of the element. Using advanced finite element models, previously validated against experimental results, the purlin systems were designed to support both gravity and pressure loads.