This review explores the advances in the synthesis of ceria materials with specific morphologies or porous macro- and microstructures for the solar-driven production of carbon monoxide (CO) from carbon dioxide (CO₂). As the demand for renewable energy and fuels continues to grow, there is a great deal of interest in solar thermochemical fuel production (STFP), with the use of concentrated solar light to power the splitting of carbon dioxide. This can be achieved in a two-step cycle, involving the reduction of CeO₂ at high temperatures, followed by oxidation at lower temperatures with CO₂, splitting it to produce CO, driven by concentrated solar radiation obtained with concentrating solar technologies (CST) to provide the high reaction temperatures of typically up to 1,500°C. Since cerium oxide was first explored as a solar-driven redox material in 2006, and to specifically split CO₂ in 2010, there has been an increasing interest in this material. The solar-to-fuel conversion efficiency is influenced by the material composition itself, but also by the material morphology that mostly determines the available surface area for solid/gas reactions (the material oxidation mechanism is mainly governed by surface reaction). The diffusion length and specific surface area affect, respectively, the reduction and oxidation steps. They both depend on the reactive material morphology that also substantially affects the reaction kinetics and heat and mass transport in the material. Accordingly, the main relevant options for materials shaping are summarized. We explore the effects of microstructure and porosity, and the exploitation of designed structures such as fibers, 3-DOM (three-dimensionally ordered macroporous) materials, reticulated and replicated foams, and the new area of biomimetic/biomorphous porous ceria redox materials produced from natural and sustainable templates such as wood or cork, also known as ecoceramics.

Chronic obstructive pulmonary disease (COPD) is highly prevalent and its pathogenesis is still not completely clarified. Clinically stable patients (n=21) and healthy subjects (n=24) were studied for blood markers of oxidative injury and antioxidant status. The plasma concentration of protein carbonyls was significantly increased in COPD patients, both ex-smokers (0.76 +/- 0.28 nmol mg(-1)) and smokers (0.99 +/- 020 nmol mg(-1)) versus controls (0.49 +/- 0.14 nmol mg(-1)) . The concentration of total thiols was slightly enhanced in plasma of the COPD patients (ex-smokers 492 +/- 23 micromol 1(-1) and smokers 505 +/- 36 micromol 1(-1) versus controls 450 +/- 67 micromol 1(-1); p < 0.05). The activity of the antioxidant enzyme superoxide dismutase was increased in erythrocytes (activity in U g(-1) haemoglobin; ex-smokers 4460 +/- 763 and smokers 4114+/- 1060 versus 3015 +/- 851 in controls; p > 0.01), while glutathione peroxidase activity was decreased in total blood (activity in U g(-1) haemoglobin: ex-smokers 27 +/- 9 and smokers 23 +/- 9 versus 47 +/- 25; p < 0.01). Lower levels of selenium in plasma were also found for COPD patients (concentration in mg 1(-1): ex-smokers 0.030 +/- 0.019 and smokers 0.032 +/- 0.024 versus 0.058 +/- 0.023 in controls; p < 0.01), being more evident in those with very low levels of arterial oxygen pressure. In addition, the levels of potassium and rubidium were increased in blood cells of the patient group. All these changes might reflect oxidant damage and an altered electrolytic homeostasis, and can be interpreted as markers of COPD rather than as indicators of smoking habits.

Water splitting by solar energy-driven two-step thermochemical cycles is a promising approach for large-scale production of renewable fuels (e.g. hydrogen). The key challenge is developing materials capable of withstanding the harsh environmental conditions and to ensure high reliability in use, particularly in terms of redox kinetics and better activity at low operation temperatures. In this work, we demonstrate that cork-templated ceria can significantly enhance the hydrogen production performance under solar irradiation heating. Three types of ceria morphologies were synthesised and investigated in two-step thermochemical redox cycles, namely ceria granules (ecoceramics) prepared from cork templates based on either a green water-based or an acetone solvent-based approach, as well as ceria foams replicated from polyurethane templates. These materials were cycled in a high-temperature indirectly-irradiated solar tubular reactor, heated via concentrated solar light, using a temperature-swing process. Samples were typically thermally reduced at 1400–1450 °C and subsequently re-oxidised with H₂O between 950–1150 °C. The green synthesis ceria granules had up to 25% and 32% higher average H₂ production yields than the acetone-based ecoceramics and replicated ceria foams, respectively. On average, H₂ production rates for cork-templated ceria granules (1.3 ± 0.2 mL min⁻¹ g⁻¹) were up to ∼60% higher than for ceria foams (0.8 ± 0.3 mL min⁻¹ g⁻¹), indicating that the morphology of this three-dimensionally ordered macroporous (3-DOM) CeO₂ improves the reaction kinetics. This is attributed to the smaller mean cell size of the cork-derived ecoceramic (25 μm) compared to that of the replicated ceria foam (575 μm), suggesting that their semi-closed wall cells enhanced reaction rates. The increase in reduction temperature from 1400 to 1450 °C resulted in the highest H₂ production rate (1.6 mL min⁻¹ g⁻¹) reported so far for 3-DOM ceria. Neither loss in redox performance nor change in grain morphology was observed from the first to the last cycle. These findings show that cork-like structural features are key to engineering efficient materials for enhanced solar thermochemical fuel production.