Lightning strikes are the main cause of transmission line faults, and the accurate lightning current number is an important basis to guide scientific lightning protection. The use of sensors with excellent sensing performance to carry out lightning current monitoring on transmission lines is beneficial to the accumulation of key parameters of original lightning strikes, so it is necessary to study the lightning current measurement structure of transmission lines. In this paper, an optical current-sensing unit is used to monitor the lightning current on transmission lines. A measuring structure that can monitor key parameters of the lightning current under different types of lightning strikes is proposed. First, establish the lightning current return channel model and the equivalent model of the tower, study the influence of the transmission tower on the current in the lightning channel, and analyze the direct measurement position of the lightning current on the tower; establish the multi-wave impedance model of the tower, and build a multi-base tower. The simulation model of the transmission system analyzes the transmission characteristics of the lightning current on the transmission line and the lightning protection line in the case of different types of faults; from the perspective of the measurement of key parameters of the lightning current, the lightning current measurement structure of the transmission system is constructed to analyze different lightning strikes. The measurement effect of each monitoring position in the case of a lightning strike and the waveform characteristics of the fault current in the case of insulator flashover are analyzed.
By using a soft normal open point (SNOP) to connect multiple distribution networks to form a flexible interconnected distribution system (FIDS), the power distribution can be flexibly and controllably regulated among distribution stations, but it is also necessary to ensure the system’s operational efficiency and maintain voltage quality when carrying out optimal scheduling. In this paper, a FIDS optimal scheduling strategy considering dynamic weight grading is proposed. By considering the voltage overrun status of each distribution station area, the voltage level of each distribution station area is divided into three voltage overrun situations, including normal operation, safe boundary, and protection boundary levels, and an optimal scheduling model applicable to the multi-level operation of the FIDS is constructed. In order to adapt to the coordinated optimal operation objectives under different overrun levels, an optimal operation strategy considering the dynamic weights of system operation cost, voltage deviation, customer satisfaction, and SNOP regulation capability is proposed and finally simulated and verified using the improved IEEE33 node arithmetic case. The results verify the effectiveness of the method proposed in this paper in improving the system’s operational efficiency and node voltage quality.