Neurophysiological observations confirm that the brain not only is able to detect the impaired synapses (in brain damage) but also it is relatively capable of repairing faulty synapses. It has been shown that retrograde signaling by astrocytes leads to the modulation of synaptic transmission and thus bidirectional collaboration of astrocyte with nearby neurons is an important aspect of self-repairing mechanism. Specifically, the retrograde signaling via astrocyte can increase the transmission probability of the healthy synapses linked to the neuron. Motivated by these findings, in the present research, a CMOS neuromorphic circuit with self-repairing capabilities is proposed based on astrocyte signaling. In this way, the computational model of self-repairing process is hired as a basis for designing a novel analog integrated circuit in the 180-nm CMOS technology. It is illustrated that the proposed analog circuit is able to successfully recompense the damaged synapses by appropriately modifying the voltage signals of the remaining healthy synapses in the wide range of frequency. The proposed circuit occupies 7500- $\mu \text{m}^{2}$ silicon area and its power consumption is about $65.4~\mu \text{W}$ . This neuromorphic fault-tolerant circuit can be considered as a key candidate for future silicon neuronal systems and implementation of neurorobotic and neuro-inspired circuits.
21 October 2021 in IEEE Transactions on Neural Systems and Rehabilitation Engineering
One major challenge in upper limb prostheses is providing sensory feedback to amputees. Reproducing the spiking patterns of human primary tactile afferents can be considered as the first step for this challenging problem. In this study, a novel biomimetic circuit for SA-I and RA-I afferents is proposed to functionally replicate the spiking response of the biological tactile afferents to indentation stimuli. The circuit has been designed, laid out, and simulated in TSMC 180nm CMOS technology with a 1.8V supply voltage. A pair of SA-I and RA-I afferent circuits consume $3.5\mu \text{W}$ of power. The occupied silicon area is $180\mu \text{m}\,\,\times 220\mu \text{m}$ for 32 afferents. To provide the inputs for circuit testing, a patch of skin with a grid of mechanoreceptors is simulated and tested by an edge stimulus presented at different orientations. Experimental data are collected using indentation of 3D-printed edges at different orientations on a tactile sensor mounted on a robotic arm. Inspired by innervation patterns observed in biology, the artificial afferents are connected to several neighboring mechanoreceptors with different weights to form complex receptive fields which cover the entire mechanoreceptor grid. Machine learning algorithms are applied offline to classify the edge orientations based on the pattern of neural responses. Our results show that the complex receptive fields arising from the innervation pattern led to smaller circuit area and lower power consumption, while facilitating data encoding from high-resolution sensors. The proposed biomimetic circuit and tactile encoding example demonstrate potential applications in modern tactile sensing modules for developing novel bio-robotic and prosthetic technologies.
Resistive sensor arrays have been increasingly utilized in physical variables measuring. Row-column method is a conventional way for resistive sensors connections. However, the non-idealities of the operational amplifiers, switches and wires reduce the accuracy of the circuit. In this paper, the effect of non-idealities on crosstalk error is analyzed and a new method has been proposed to reduce all nonideality effects simultaneously. The proposed circuit reduces the measuring error by using only two additional buffers. The results of theoretical analysis, simulation and measurement confirm that the proposed method can improve the accuracy. Simulation results of 8×8 array for a 100Ω non-scanned resistance show that the worst-case measuring error is decreased to 0.025%. For a 32Ω resistance of row selection switches and a 32Ω resistance of columns wires, the error is reduced to 0.000027% and 0.00049%, respectively. Also, the simulation results for a 32×32 array shows the maximum error of 0.0005% in the array. Furthermore, an 8×8 resistive array has been designed and implemented which the measurement results confirm that for a 30.9Ω resistance of row selection switches and a 30.9Ω resistance of columns wires, the error is reduced to 0.033% and 0.308%, respectively.
Different winner-take-all (WTA) and loser-take-all (LTA) circuits are studied, and their operations are analyzed in this review. The exclusive operation of the current conveyor, binary tree, and time-domain WTA/LTA architectures, as the most important architectures reported in the literature, are compared from the perspectives of power consumption, speed, and precision.
21 June 2022 in Analog Integrated Circuits and Signal Processing
In this research, the main functional characteristics of nociceptors are considered for designing a novel neuromorphic circuit in TSMC 180 nm CMOS technology with a 1.8 V supply voltage and 780 $\mu$ W power consumption. Indeed, the current study is the first analog circuit realization of the functional model of nociceptors. The proposed circuit includes three spiking neurons. The first and second neurons determine the pressure level and the active area of the stimulus, respectively. The pressure to active area ratio is sensed by the third neuron and helps for better discrimination of the input stimuli. To evaluate the performance of the proposed nociceptor circuit, we perform numerical simulations and robotic experiments. In this way, the 3D-printed objects with different sharpness are touched by a custom-made tactile sensor and the spiking responses from the nociceptor neuromorphic circuit are then collected. Next, machine learning algorithms are applied offline to classify objects based on the rate and time of the spike responses. The results show that by analyzing the spike patterns obtained from the bio-inspired circuit, it is possible to recognize stimuli after the emission of a few spikes. The proposed approach is the proof of concept that circuit implementation of the functional model of the nociceptors expands the range of object recognition and hence facilitates the fabrication of novel tactile sensory systems for bio-robotic and prosthetic applications.