We have observed induced currents associated with the fractional quantum Hall effect (FQHE) in a contactless two-dimensional electron gas subjected to a sweeping magnetic field. Their current-voltage characteristics exhibit pronounced nonlinearities caused by the breakdown of the FQHE at high currents. Our results support the inter-Landau-level-scattering model of breakdown and provide a new local probe of the FQHE energy gaps at and . They are also consistent with the composite-fermion picture but yield an effective mass significantly smaller than previously reported values.
This paper describes an exercise that was undertaken recently to compare reflection and transmission measurements in rectangular metallic waveguide from 110 GHz to 170 GHz (i.e. in the WR-06 waveguide size). The comparison involved making measurements on four devices fitted with `precision' MIL-DTL-3922-67D style flanges. These devices were circulated amongst the nine organizations that chose to participate in the exercise. The comparison took place between August 2008 and September 2009. Results from the exercise are presented in graphical form along with a statistical summary showing average variability for the measurements. The authors believe this is the first time that such a comparison of measurements has been made at these frequencies. These results therefore provide a benchmark for the current state-of-the-art for measurements made in waveguide at these frequencies.
1 February 2000 in Physica E: Low-dimensional Systems and Nanostructures
Background: A major inhibitor in the development and certification of non-destructive test equipment is the lack of access to statistically appropriate numbers of test pieces which contain relevant flaws. Methods of introducing these flaws in a controllable and repeatable manner are always in demand. Methods: This paper discusses the development and evaluation of a method for seeding contact cracks in ASTM F519-18 Type 1a.1 notched tensile coupons. Contact cracks of controlled dimensions are successfully introduced into a set of these specimens by closely monitoring the resonance frequency and peak splitting due to anisotropy. Results: Results are confirmed using Scanning Electron Microscopy, carried out on a selection of the coupons. The least exposed coupon was shown to have a crack propagating inwards from the notch with a length of approximately 50 microns. More heavily exposed samples had longer cracks spanning nearly the entire notch with a crack width of 1.3 microns. Conclusions: The correlation between crack growth and the frequency monitoring proves that this technique could be further developed for the controlled creation of contact cracks for NDT validation or other applications.