Dmytro Babets

Prof. Dmytro Babets

Applied Mathematics, Dnipro University of Technology, Dnipro, Dnipropetrovs’ka Oblast’, Ukraine
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 December 2022 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
OSOlena Sdvyzhkova
Olena Sdvyzhkova
SMSerik Moldabayev
Serik Moldabayev
ABAtac Bascetin
Atac Bascetin
Dmytro BabetsDmytro Babets
Dmytro Babets
EKErzhan Kuldeyev
Erzhan Kuldeyev
BIBakhytzhan Issakov
Bakhytzhan Issakov
Purpose. A methodology development for predicting the geomechanical situation when mining an ore deposit with steep-dipping layers, taking into account the uncertainty in determining the rock properties, which is a consequence of the rock mass heterogeneity. Methods. The assessment of the open-pit wall stability is based on a combination of numerical simulation of the rock stress-strain state (SSS) and probabilistic analysis. The finite element method is used to determine the changes in the SSS that occur at various stages of mining operations due to design changes in the overall open-pit slope angle. The elastic-plastic model of the medium and the Mohr-Coulomb failure criterion are implemented in the codes of the 3D finite element analysis program RS3 (Rocscience). Stochastic simulation is used to assess random risks associated with natural object state variations. Findings. The distribution of maximum shear strains, which localizes the real or potential sliding surfaces in the open-pit wall at various stages of ore mining, has been identified. Based on the Shear Strength Reduction procedure, the open-pit wall Strength Reduction Factor (SRF) has been determined. The probabilities of open-pit wall stability loss, as well as the decrease in the strength reduction factor below the standard level at all stages of the ore body mining, have been revealed. Originality. For the first time, for real mining-geological conditions of a deep ore open pit, the dependence of the strength reduction factor on the overall wall slope angle, which changes during mining of each steep layer, has been determined. For each stage of mining operations, for the first time, the probability of a decrease in the open-pit wall stability below the standard level has been determined based on stochastic simulation. Practical implications. The ratio between the open-pit contour characteristic (overall slope angle) and the probabilistic safety factor is the basis for practical solutions to ensure the efficiency and safety of mining at various stages of friable and hard overburden excavation, ore extraction, as well as for the subsequent optimization of the open-pit design contours.

30 June 2023 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
Dmytro BabetsDmytro Babets
Dmytro Babets
OSOlena Sdvyzhkova
Olena Sdvyzhkova
SHSerhii Hapieiev
Serhii Hapieiev
OSOleksandr Shashenko
Oleksandr Shashenko
VVVasyl Vasyl
Vasyl Vasyl
Purpose. Creating a generalized algorithm to account for factors (coal seam thickness, enclosed rock mechanical properties, the dimension and bearing capacity of artificial support patterns) causing a gateroad state under the effect of longwall face and goaf. Methods. The assessment of the gateroad stability is based on numerical simulation of the rock stress-strain state (SSS). The finite element method is used to find out the changes in the SSS of surrounding rocks at various stages of longwall mining. The elastic-plastic constitutive model and Hoek-Brown failure criterion implemented in codes RS2 and RS3 (Rocscience) are applied to determine rock displacements dependently on the coal seam thickness, enclosed rock strength, width and strength of artificial support (a packwall comprised of hardening mixture “BI-lining”). To specify the mechanical properties of the packwall material a series of experimental tests were conducted. A computational experiment dealing with 81 combinations of affecting factors was carried out to estimate the roof slag and floor heaving in the gateroad behind the longwall face. A group method of data handling (GMDH ) is employed to generalize the relationships between rock displacements and affecting factors. Findings. The roof-to-floor closure in the gateroad has been determined at the intersection with the longwall face and goaf dependently on the coal seam thickness, enclosed rock strength, width of the packwall, and strength of hardening material. It is revealed that the support material gains the strength value of 30 MPa on the 3rd day from its beginning to use which is fully corresponding to the requirements of protective element bearing capacity. The possibility of using untreated mine water to liquefy the mixture is proved, that allows simplifying and optimizing the solute mixing and pumping technology. Originality. This study contributes to improving the understanding of the factors that influence the stability of underground mining operations and highlights the importance of utilizing numerical simulations in optimizing mining designs. The impact of each factor on the resulting variable (decrease in cross-section of gate road by height) based on the combinatorial algorithm of structural identification of the model is estimated as follows: the packwall width is 48%, the thickness of coal seam is 25%, the strength of enclosing rocks is 23%, and the strength of the packwall material is 4%. Practical implications. The findings provide stakeholders with a technique to determine reasonable parameters for support and protective systems, and the predictive model developed can be used to mitigate potential instability issues in longwall mining excavations. The results have implications under similar geological settings and can be valuable for mine design and optimization in other regions.

30 December 2019 in Mining of Mineral Deposits
Verified
Journal Article
Open access
Dmytro BabetsDmytro Babets
Dmytro Babets
OSOlena Sdvyzhkova
Olena Sdvyzhkova
OSO Shashenko
O Shashenko
KKK Kravchenko
K Kravchenko
ECEdgar Caceres Cabana
Edgar Caceres Cabana

30 June 2024 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
OSOlena Sdvyzhkova
Olena Sdvyzhkova
SMSerik Moldabayev
Serik Moldabayev
Dmytro BabetsDmytro Babets
Dmytro Babets
ABAtac Bascetin
Atac Bascetin
GAGulnur Asylkhanova
Gulnur Asylkhanova
VPVira Prykhodko
Vira Prykhodko
Purpose is to assess changes in the stress-strain state of walls along the whole periphery of a super-deep open pit while optimizing its current and final boundaries for the complete ore excavation. Methods. Finite element 3D analysis of stress-strain state (SSS) of the soil and rock mass relies upon the models varying in their scales. Macrolevel model includes the full pit helping perform initial evaluation of its stability depending upon changes in the general wall slope along the pit periphery. Then, the macromodel is separated into sectoral models with smaller scales oriented radially in such a way to include potentially unstable wall areas. The sectoral models make it possible to show the complex bench line in more detail after the peripheries were optimized in terms of economic factor and simulate layered structure of the rock mass. Elastoplastic model of the medium as well as Mohr-Coulomb strength criterion has been implemented using RS3 (Rocscience) program codes. Findings. An indicator of wall strength (safety factor) distribution along the pit periphery has been identified; potential sliding surfaces within each of the separated open pit sectors have been localized based upon the shear strength reduction (SSR) procedure. Influence by the general wall slope as well as by the indicator of the ore excavation completeness on the stripping ratio has been demonstrated. Originality. For the first time, two-level modelling has shown difference in a safety factor depending upon a model scale and a reflection degree of the soil-rock mass structure. In the context of the actual mining and geological conditions of Kacharsky open pit, changes in the safety factor along the pit periphery have been identified depending on the general slope of the wall. Practical implications. Based upon the pit wall stability along the whole periphery, the possibility has been substantiated to optimize its design boundaries for the excavation of those amenable ore reserves, occurred near them, inclusive of ore, occurring in a bottom, which mining is impossible due to inaccessibility.

20 September 2020
Verified
Conference Paper
Closed access
OSOlena Sdvyzhkova
Olena Sdvyzhkova
Dmytro BabetsDmytro Babets
Dmytro Babets
SMSerik Moldabayev
Serik Moldabayev
KRKanay Rysbekov
Kanay Rysbekov
MSMadiyar Sarybayev
Madiyar Sarybayev
Ensuring the stability of underground construction remains a challenge in terms of coal mining. The implementation of effective coal mining technology facilitates high rates of operations and simultaneous exposure of large-scale rocks. This problem is relevant both for Ukraine, where underground coal mining is the main one and for Kazakhstan, where the transition to combined open-underground mining is also underway. Supporting the mined-out space under complicated geological conditions requires an in-depth analysis of factors affecting the stability of rock openings [1]. Hence, the natural step preceding the excavation design is the study of the strength and deformation properties of rocks, which traditionally consists of sampling on the site and testing the specimens in the laboratory or “in situ” with approved standard methods. The test result is a statistical set of values related to strength or deformation modulus, which is usually processed by descriptive statistics. The researcher could observe a significant variation of strength with respect to mean value at this stage, which is due to the rock mass heterogeneity. Failure of non-consideration of this variation can lead to design errors. It should be noted that only specimens taken from the homogeneous (“good”) part of the probe are involved in laboratory tests because the sample extracted from the jointed part of the rock mass can be broken before the trial. This means that laboratory tests give a certain “ideal” strength characteristic, which differs significantly from the strength of a heterogeneous and structurally disturbed rock mass. This dissimilarity can be considered by various methods based on additional rock mass examination [2, 3].

14 October 2015
Verified
Book Chapter
Closed access
PDF file
OSO Sdvyzhkova
O Sdvyzhkova
Dmytro BabetsDmytro Babets
Dmytro Babets
KKK Kravchenko
K Kravchenko
ASA Smirnov
A Smirnov
Results of theoretical study of dust cloud spraying parameters after single blast in iron-ore quarries are given. The nature of reducing dust concentration within the cloud in terms of its spraying, level of effect of water drop diameter and its consumption on the dust suppression efficiency is determined. Coefficient of dust particle capture with the help of water drops to spray solutions of the surface-active substances is studied. Optimum values of these parameters to suppress the cloud of iron-ore dust are substantiated.