Yupu Wang

Mr. Yupu Wang


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 October 2023 in Materials
Verified
Journal Article
Open access
PDF file
YWYupu Wang
Yupu Wang
JLJiazheng Li
Jiazheng Li
YSYan Shi
Yan Shi
The layer bonding performance of hydraulic engineered cementitious composites (HECCs) plays an important role in their application in hydraulic buildings. This performance encompasses the bonding between layers of HECCs, as well as between HECCs and normal mortar (NM) layers. The influence of various factors on the layer bonding performance of HECCs was investigated. These factors included different pouring intervals (0 min, 20 min, 40 min, 60 min, 2.5 h, 7 days, 14 days, and 28 days), pouring directions (horizontal and vertical), degree of saturation (100%, 70%, 50%, 30%, and 0%), and surface roughness (varying sand-pour roughness). It was found that longer pouring interval times led to a decrease in the layer bonding performance, and the strength of the layer bonding fell below 50% compared to concrete without layers, with the lowest recorded strength being only 1.12 MPa. The layer’s horizontal flexural strength surpassed the vertical flexural strength, but the horizontal compressive strength fell below the vertical compressive strength. Additionally, the bonding performance of the substrate at 0% saturation was 15–20% lower compared to other saturation levels. Notably, roughness significantly enhanced the performance of HECC layers, with improvements reaching a maximum of 180–200%. Furthermore, the layer performance of HECCs and NM experienced an improvement of 20.5–37.5%.

16 July 2024 in Coatings
Verified
Journal Article
Open access
PDF file
YSYan Shi
Yan Shi
YWYupu Wang
Yupu Wang
XLXingdong Lv
Xingdong Lv
WJWenguang Jiang
Wenguang Jiang
CWCai Wu
Cai Wu
Enhancing the durability and extending the service life of concrete are crucial for promoting its sustainable development. Applying surface coatings is the primary technical method used to improve concrete durability. In this study, based on the plasma thermal spraying technology, a thermal-sprayed, ceramic-based coating was prepared on a concrete surface and evaluated using the drawing method, X-ray diffraction scanning electron microscopy with energy dispersive spectroscopy, X-ray computed tomography (X-CT), and frictional wear. Subsequently, performance tests were conducted. The test results showed that mullite powder was a suitable ceramic-based coating material. The coating had a good interfacial bonding ability with the concrete surface; moreover, the bonding site exhibited a chimeric state with an adhesion strength of 3.82 MPa. The wear rate of the coating material (0.02‰) is lower than that of the concrete matrix (0.06‰), resulting in improved surface wear resistance. SEM analysis reveals that the coating contains a considerable amount of amorphous or microcrystalline phases. The internal structure of the coating exhibits porous characteristics, with a total porosity of 10.35% and pore diameters predominantly ranging from 4 μm to 16 μm. At a distance of 80 μm from the coating site, the elements Al, O, and Si significantly contribute to the mullite components. The porous structures within the coating products are further verified using X-CT. This study offers a new possibility for ceramic coatings on hydraulic concrete.

10 December 2024
Verified
Book Chapter
Open access
PDF file
YSYan Shi
Yan Shi
YWYupu Wang
Yupu Wang
JLJiazheng Li
Jiazheng Li
WJWenguang Jiang
Wenguang Jiang
To explore the durability of hydraulic engineered cementitious composites (HECC), this article uses hydraulic concrete permeability and frost resistance tests, evaluates them in combination with mechanical tests in high-temperature resistance and self-healing tests, and explores the influence of different maximum particle sizes of sand on permeability and frost resistance. In high-temperature resistance, the thermal stability of fibers and the influence of different curing temperatures on mechanical properties are explored, and the effects of different maximum particle sizes of sand, different water–cement ratios, and different ages on self-healing performance are explored. The results show that the finer the sand used in HECC is, the better its impermeability is and the permeability coefficient is in the order of 10–6 or 10–7; the better the frost resistance is, the maximum frost resistance level can reach F300. As the curing temperature increases, the compressive and flexural strength first increase and then decrease, with a maximum increase of 43%. Compared to 0.25, a water adhesive ratio of 0.35 has better self-healing ability, with a strength ratio of 167% at 7 days and 72% at 28 days. The research results can provide a reference for further promoting the application of HECC in water conservancy engineering.

29 June 2024
Verified
Book Chapter
Open access
PDF file
YSYan Shi
Yan Shi
YWYupu Wang
Yupu Wang
YXYang Xu
Yang Xu
XLXingdong Lv
Xingdong Lv
Concrete-faced rockfill dams (CFRDs) have become an important choice for dam construction worldwide due to their economy, construction simplicity and high adaptability to complex terrain. In this paper, the effects of impermeable anti-cracking agent, PVA fiber and cellulose fiber single admixture as well as compound admixture on the mechanical properties, deformation properties and durability properties of panel concrete were investigated. The results showed that: the enhancement of mechanical properties of panel concrete by fiber and impermeable anti-cracking agent was not obvious, the addition of fiber increased the early axial tensile strength; the addition of impermeable anti-cracking agent improved the cracking resistance, and the grade of cracking resistance was improved from Class II to Class I; the compounding of impermeable anti-cracking agent and fiber increased the drying shrinkage value; all specimens have a frost resistance grade of F200.