Composting is a common method for managing organic waste and creating nutrient-rich soil amendments. Recently, biochar, a carbon-rich material from biomass pyrolysis, has been noted for potentially improving composting. This study examines the impact of adding biochar to compost made from cow manure and kitchen waste through a controlled lab experiment. The treatments were labeled as CMX (cow manure), KWX (kitchen waste), and CMKWX (both) with X being the percentage of CM, KW, and CMKW minus that of biochar in the mixture. Key parameters such as temperature (T), pH, and electric conductivity (EC) were tracked during the composting processes, and the final composts were analyzed for total nitrogen (N), available nitrogen (AN), total phosphorus (TP), available phosphorus (AP), total potassium (TK), organic carbon (OC), calcium (Ca²⁺), magnesium (Mg²⁺), and organic matter (OM). The results showed that adding less than 10% biochar influenced composting positively. Specifically, 5% biochar amendment led to higher thermophilic temperatures (45–57 °C) and stable pH levels (6.3–8.7) compared to controls. However, biochar did not significantly enhance EC, which peaked at 1.78 dS/m in both the control and 5% biochar treatments. Nutrient analysis revealed that biochar increased Ca²⁺ (13.62 meq/g) and Mg²⁺ (5.73 meq/g) retention in CM composts (CM85 and CM100). The highest OM content was 16.84% in CM90, while the lowest was 3.81% in CM95. Higher OM negatively affected TN, with CM treatments having more OM and KW treatments having more TN. TP and TK were higher in control treatments without biochar. This study highlights the benefits of integrating biochar with organic waste for enhancing compost nutrient profiles and soil fertility. It was observed that the more diverse the compost feedstock, i.e., CMKW, the higher the nutrient content for treatments containing less than 10% biochar.

Land use has a greater impact on trace element (TE) concentration present in soils. In mountainous regions of the western Himalayas, some dominating geogenic and human-dependent anthropogenic factors are involved in the spatial distribution of TEs in various land uses. Soil samples were collected from permafrost, pasture, forest, and agricultural land-use systems of Babusar Valley and Fairy Meadows in Diamer districts and the Rama region in Astore Districts in replications for investigation of three TEs, i.e., copper (Cu), zinc (Zn), and nickel (Ni). These samples were analyzed for exchangeable, adsorbed, organically bound, carbonate precipitated, and residual forms. Significant differences among these TEs were observed. Differences in the levels of TEs within soil samples were observed to be influenced by land usage patterns. The physicochemical properties of soil samples were also investigated. Additionally, the total metals (Ni, Zn, Cu) were extracted and their concentrations were measured in all samples. The concentration of soil TEs was observed in the following order: adsorbed < organically bound < exchangeable < residual < carbonate precipitated form across all the land uses. The results indicate that the contents of TEs (Ni, Zn, Cu) in agricultural soils were greater than in the permafrost pasture and forest soil samples. The total TE concentration varied as Zn > Ni > Cu irrespective of the area and land uses. We believe this work will open avenues for researchers to explore TEs in various regions of the world.

Lignocellulosic biomass needs attention as an alternative energy source to overcome the adverse impacts of fossil fuels. Diversified Galiyat forests of Lower Himalaya may represent the potential source of lignocellulose degrading microbiota, particularly the lytic bacteria. Therefore, soil and wood samples were collected from different sites of Nathiagali and Thandiani of Galiyat forests. The soil samples collected were clayey, with a pH between 6.7 and 7.0, and with an organic matter of 2.8%–2.9% in Nathiagali and 2.1%–2.2% in Thandiani. The soils were enriched with more diversified cultivable bacteria (9 Log CFU/g) than the respective wood samples (7.4–8.6 Log CFU/g). Out of 90 bacteria, 22 isolates were efficient for cellulose degradation, 14 for xylanase activity, and 10 for laccase production. Cluster analysis showed that lignocellulolytic bacteria were grouped based on the sample medium (soil–wood) rather than the sampling site (Thandiani–Nathiagali). Efficient bacteria were also sequenced, and we found that cellulase production was prevalent in Pseudomonas spp. while laccase activity was diverse among taxonomically varied bacteria. Moreover, Stenotrophomonas sp. TS2B1 performed the best for corncob xylose degradation. Overall, the results suggest that Galiyat forests represent diverse lignocellulolytic microbial populations which should be further evaluated for applications in lignocellulosic waste management and for potential consequent fuel production.

This research was carried out to analyze variations in indoor and outdoor ozone concentrations and their health impact on local communities of megacities in Pakistan. For indoor ozone measurements, industrial units of an economic zone, Hattar Industrial Estate, Haripur, KPK, Pakistan, were selected. For outdoor ozone measurements, maximum and minimum peaks from different selected stations of three megacities (Islamabad, Abbottabad, and Haripur Hattar) in Pakistan were analyzed for paired comparisons. The tropospheric ozone levels were measured with the help of a portable SKY 2000-WH-O₃ meter from December 2018 to November 2019. According to the findings of this investigation, the indoor ozone concentrations at Hattar Industrial Estate exceeded the permissible limit devised by the WHO. The highest concentration (0.37 ppm) was recorded in the month of May in the food industry, while the lowest concentration (0.00 ppm) was recorded in the cooling area of the steel industry in the month of December. For outdoor ozone concentrations, the maximum concentration (0.23 ppm) was detected in Islamabad in the month of March 2019, whereas the rest of year showed comparatively lower concentrations. In Haripur, the maximum concentration (0.22 ppm) was detected in the month of February 2019 and a minimum concentration (0.11 ppm) was found in the month of November 2019. In Abbottabad, the maximum concentration (0.21 ppm) was detected in the month of March 2019 and the minimum concentration was 0.082 ppm. Increasing tropospheric ozone levels might be harmful for local communities and industrial laborers in the winter season because of the foggy weather. In the Abbottabad and Hattar regions, since COVID infection is indirectly related to low temperature and high emission of gases may compromise the respiratory systems of humans. The results of the present study were shared with industrialists to set precautions for ambient air quality and support the adoption of low emission techniques in industries for the safety of labour and nearby residents.