The micro-channel heat sink (MCHS) is an excellent choice due to its exceptional cooling capabilities, surpassing those of its competitors. In this research paper, a computational fluid dynamics analysis was performed to investigate the laminar flow and heat transfer characteristics of five different configurations of a variable geometry rectangular fin. The study utilized a water-cooled smooth MCHS as the basis. The results indicate that the micro-channel heat sink with a variable geometry rectangular fin has better heat dissipation capacity than a straight-type micro-channel heat sink, but at the same time, it has larger pressure loss. Based on the analysis of various rectangular fin shapes and Reynolds numbers in this study, the micro-channel heat sink with rectangular fins exhibits Nusselt numbers and friction factors that are 1.40–2.02 and 2.64–4.33 times higher, respectively, compared to the smooth heat sink. This significant improvement in performance results in performance evaluation criteria ranging from 1.23–1.95. Further, it is found that at a relatively small Reynolds number, the micro-channel heat sink with a variable geometry rectangular fin has obvious advantages in terms of overall cooling performance. Meanwhile, this advantage will decrease when the Reynolds number is relatively large.

Traditional electronic pianos mostly adopt a gantry type and a large number of rigid keys, and most keyboard sensors of the electronic piano require additional power supply during playing, which poses certain challenges for portable electronic products. Here, we demonstrated a fluorinated ethylene propylene (FEP)-based electret nanogenerator (ENG), and the output electrical performances of the ENG under different external pressures and frequencies were systematically characterized. At a fixed frequency of 4 Hz and force of 4 N with a matched load resistance of 200 MΩ, an output power density of 20.6 mW/cm² could be achieved. Though the implementation of a signal processing circuit, ENG-based, self-powered pressure sensors have been demonstrated for self-powered, flexible electronic pianos. This work provides a new strategy for electret nanogenerators for self-powered sensor networks and portable electronics.

Two slabs of dielectrics with different values of refractive index are synthesized to form a composite structure and the whole system satisfies parity-time-reciprocal scaling symmetry. Four coherent-perfect-absorber-laser points are induced by modulating the incident wavelength of lightwaves and the loss/gain factor of materials. The locations of coherent-perfect-absorber-laser points in parameter space, which manifests the multi-wavelengths of coherent-perfect-absorber-lasers could be regulated by the incidence angle. Especially, a value of π phase shift in the transmitted/reflected light wave has been observed as well. This research has potential applications in multi-wavelength absorbers/lasers and half-wave phase shifters.