The long-span double-deck truss girder bridge has become a recommend structural form because of its good performance on traffic capacity. However, the vortex-induced vibration (VIV) characteristics for double-deck truss girders are more complicated and there is a lack of related research. In this research, wind tunnel tests were utilized to investigate the VIV characteristics of a large-span double-deck truss girder bridge. Meanwhile, the VIV suppression effect of the aerodynamic mitigation measures was measured. Furthermore, the VIV suppression mechanism was studied from the perspective of vortex shedding characteristics. The results indicated that the double-deck truss girder had a significant VIV when the wind attack angles were +3° and +5°. The aerodynamic mitigation measures had an influence on the VIV response of the double-deck truss girder. The upper chord fairing and lower chord inverted L-shaped deflector plate played a crucial role in suppressing VIV. Numerical analysis indicated that vortex shedding above the upper deck or in the wake region may dominate vertical VIV, while vortex shedding in the wake region of the lower deck may dominate torsional VIV. The upper chord fairing and lower chord inverted L-shaped deflector plate disrupted the original vortex shedding pattern in both regions, thereby suppressing VIV. This research can provide a foundation for bridge design and vibration suppression measures for large-span double-deck truss girder bridges.

Large-span suspension bridges are susceptible to wind loads. Therefore, a more precise analysis of their wind-induced vibration response is necessary to ensure the structure’s absolute safety. This investigation conducted wind tunnel tests for the construction and completion stages to reveal the vortex-induced vibration (VIV) phenomenon of a double-deck suspension bridge. The results showed that no VIV occurred during the construction stage. However, the inclusion of railings significantly deteriorated the aerodynamic performance of the suspension bridge, leading to significant VIV at +3° and +5° wind angles of attack. Additionally, reducing the railing ventilation rate can significantly suppress the VIV amplitude. A new analysis method based on computational fluid dynamics (CFD) simulation is proposed to investigate the VIV mechanism of the double-deck truss girder. Twenty-nine measurement points were used to explore the vortex that causes VIV. The numerical simulations found that the area above and aft of the upper deck dominated the vertical VIV, while the aft of the lower deck dominated the torsional VIV. Furthermore, the intensity of the vortex in these areas was significantly lower during the construction stage. Moreover, reducing the railing ventilation rate significantly suppresses the torsional VIV by reducing the intensity of the vortex in the region behind the lower deck.

This investigation proposes an analytical approach for analyzing the impact of random defects on light steel frame materials. The addition of random defects for the overall and the component units was achieved by integrating Matlab R2022a and Ansys R19.0 finite element software. Nonlinear analysis was conducted to calculate ultimate load factors and nodal ultimate displacements of the materials under various random defects at each stage of construction. A two-factor analysis was employed to investigate the effects of random defects on the calculation results during different construction stages. The investigation reveals that the response of the light steel frame materials to initial defects is more pronounced during the construction stage. Moreover, the construction stage is the main factor that affects the ultimate load factor and nodal ultimate displacement, compared with random defects. The influence of different random defects on structural displacements varies significantly. The displacement development of the light steel frame materials under the influence of component unit defects tends to be more rapid than that of the overall defects. However, their buckling critical loads are essentially similar.

This paper carried out wind tunnel tests and numerical analysis to study the effect of the spatial position of deflector plates on the vortex-induced vibration (VIV) of a double-deck truss girder. The wind tunnel tests found that setting the web deflector plate and the lower chord deflector plate significantly suppressed the VIV. In order to study the suppression mechanism of the deflector plate on VIV, numerical simulations were conducted using the computational fluid dynamics (CFD) method. We analyzed the suppression mechanism of the deflector plate on VIV by combining the vertical amplitude obtained by numerical simulation with the change in the vorticity magnitude and direction. The results showed that the flow velocity around the lower surface of the airflow was reduced, resulting in significantly lower vorticity at the exact position of the lower chord deflector plate and web deflector plate section compared to the original section. The web deflector plate and the lower chord deflector plate broke the vortex shedding mode in the wake flow region, and the vortex shedding frequency was far away from the self-oscillation frequency of the double-deck truss girder, thus suppressing the VIV.