Alkaline water electrolysis is a key technology for green hydrogen production, yet the performance of small-scale systems operating with low electrolyte concentrations remains underexplored. This study addresses this gap by developing and experimentally validating a numerical model for a laboratory-scale, bipolar alkaline electrolyser. An electrochemical model, accounting for reversible voltage, activation, and ohmic overpotentials, including the effects of gas bubble formation, was created to simulate the electrolyser's performance across potassium hydroxide concentrations ranging from 3 to 15% by mass. The model demonstrated good agreement with experimental polarisation curves, particularly at an operating voltage of 12 V, yielding mean relative errors between 1.4 and 10.5%. Results confirmed that higher potassium hydroxide concentrations significantly enhanced current density due to improved ionic conductivity. Voltage decomposition analysis identified activation overpotential as the dominant source of efficiency loss across all conditions. Furthermore, the model showed that gas bubble formation contributes progressively more to overpotentials at higher current densities, with its impact most significant in the electrolyte and at the cathode. This work presents a validated tool for predicting electrolyser performance and underscores the critical role of electrolyte composition in balancing ionic conductivity and electrochemical losses, offering valuable insights for optimising simpler and safer off-grid hydrogen systems.
Agro-industrial activities generate large volumes of wastewater. When this wastewater is discharged to the environment without proper treatment, it represents a serious problem. Bioenergy production can be conducted using wastewater, but the presence of some recalcitrant compounds may require a pre-treatment step. Advanced oxidation processes (AOPs) were traditionally used to treat hazardous materials but have recently been applied in various bioenergy production processes. AOPs are highly competitive water/wastewater treatment technologies and their application in the bioenergy sector is increasing as a pre-treatment process. Despite the increasing interest in using AOPs to enhance biofuel production, there is a lack of comprehensive documentation on their integration into biofuel production operations. This critical review highlights the application of AOPs as pre-treatment for agro-industrial wastewater (AIW) to enhance bioenergy production. It was noted that AOP applications can reduce the COD, VS, TS and total polyphenols, resulting in an improvement in their biodegradability. Moreover, these processes help remove hemicellulose and lignin contents, increasing the production of biogas, biodiesel and bioethanol. Among the different AOPs presented in this work, wet air oxidation showed promise for pre-treating lignocellulosic biomass to produce various energy types, while sonolysis and ozonation proved effective as a biosolid pre-treatment. Ozonolysis, Fenton reagents and photocatalysis are commonly used to selectively remove phenolic compounds and colorants from organic effluents. The high energy requirements and chemicals reagents costs are identified as obstacles to the application of AOPs in bioenergy production. Further studies should investigate the integration of AOPs with other treatment processes to improve the cost-effectiveness.
The by-products of the wine industry represent a global production of 10.5 to 13.1 million tons of wine pomace annually. This study examines the chemical composition and energy potential of wine pomace and distillation stillage, evaluating their suitability for pellet production within ENplus® standards. Proximate analysis, elemental analysis, and calorimetric analysis were conducted on samples of the two by-products collected in a local Distillery in Portugal. The results reveal that wine pomace has a higher volatile matter content (62.695%) than distillation stillage, which, however, has lower ash content (3.762%) and higher fixed carbon (31.813%). Calorimetric analyses show that distillation stillage has a superior low heating value compared to wine pomace, with values exceeding 19 MJ/kg. Both by-products, however, exceed ENplus® limits for ash (≤0.70), nitrogen (≤0.3), and sulfur (≤0.04) content, presenting challenges for use as high-quality fuel pellets. Combining these biomasses with other materials could reduce the pollutant content of the pellet and improve efficiency. This study highlights the need for pre-treatment strategies to lower ash content and enhance combustion. Policy support for sustainable practices is essential to optimize the use of wine pomace and distillation stillage as renewable energy sources.
Forest biomass energy, when utilized responsibly, presents a carbon-neutral and viable alternative to fossil fuels for energy storage. This research investigates the energy potential of various coniferous species, focusing on their complex chemical compositions and suitability for energy production. Key characteristics such as moisture content, volatile matter, ash content, and fixed carbon were analyzed, along with elemental composition (including nitrogen, carbon, oxygen, and hydrogen) and both gross and net heating values across different species. The proximate analysis revealed significant interspecies variations. For example, Pseudotsuga menziesii and Chamaecyparis lawsoniana exhibited the lowest moisture contents. Elemental analyses showed a broad range of values, with Larix decidua having the lowest nitrogen content and Sequoiadendron giganteum the highest carbon content. Gross and net heating values also varied considerably, with Podocarpus macrophyllus showing the lowest values and Pinus strobus the highest. Principal component analysis (PCA) was employed to identify underlying patterns, revealing correlations between the analyzed variables and the energy potential of the species. Additionally, PCA combined with cluster analysis allowed for the identification of coherent groups of species with similar characteristics. Overall, these findings highlight the diverse energy valorization potential inherent in coniferous species, underscoring the importance of considering specific chemical compositions for efficient energy production. The insights provided here are valuable for selecting coniferous species for energy valorization, emphasizing the need to consider both chemical composition and calorific potential.
In this study, a steady-state thermodynamic equilibrium evaluation of CO2 methanation was conducted. Calculations were performed by solving the material balance equations using the equilibrium constants of CO2 methanation and reverse water–gas shift reactions. Results obtained from an analytical method developed with the aid of the Microsoft Excel platform were compared to simulations conducted using the commercially available free software COCO and DWSIM. The effects of temperature, pressure, and H2/CO2 ratio on CH4 yield, carbon oxide formation, and heat balance were investigated. The results indicate that the methanation process is highly favored by low temperatures and higher pressures with a stoichiometric H2/CO2 ratio. Under these conditions, CH4 output increases, and carbon formation is reduced, resulting in better performance. Simulations from all three models are in agreement, with minor differences noted in the DWSIM software.
This study provides a high-quality comparative characterization of biochars derived from regionally significant Portuguese feedstocks: hazelnut shell, pine, pinecone, oak pruning waste, and swine manure. All feedstocks were subjected to pyrolysis at 450 °C to evaluate their potential as solid fuels. The results demonstrate the clear superiority of woody-based biochars for energy applications, with hazelnut shell biochar exhibiting the highest fixed carbon (up to 82.89%) and the highest lower heating value (up to 31.64 MJ/kg). In contrast, swine manure biochar proved unsuitable as a standalone fuel due to its extremely high ash content (48.34%). A notable preliminary finding, based on a single case study, was the significant improvement in carbon content in a slow-cooled hazelnut sample, suggesting that post-pyrolysis conditions are not chemically inert and offer a promising avenue for future research in biochar optimization. This work highlights a hierarchical valorisation model for local biomass, classifying feedstocks for optimal use in premium fuel production, general energy applications, or soil amendment based on their distinct thermochemical properties.