The by-products of the wine industry represent a global production of 10.5 to 13.1 million tons of wine pomace annually. This study examines the chemical composition and energy potential of wine pomace and distillation stillage, evaluating their suitability for pellet production within ENplus® standards. Proximate analysis, elemental analysis, and calorimetric analysis were conducted on samples of the two by-products collected in a local Distillery in Portugal. The results reveal that wine pomace has a higher volatile matter content (62.695%) than distillation stillage, which, however, has lower ash content (3.762%) and higher fixed carbon (31.813%). Calorimetric analyses show that distillation stillage has a superior low heating value compared to wine pomace, with values exceeding 19 MJ/kg. Both by-products, however, exceed ENplus® limits for ash (≤0.70), nitrogen (≤0.3), and sulfur (≤0.04) content, presenting challenges for use as high-quality fuel pellets. Combining these biomasses with other materials could reduce the pollutant content of the pellet and improve efficiency. This study highlights the need for pre-treatment strategies to lower ash content and enhance combustion. Policy support for sustainable practices is essential to optimize the use of wine pomace and distillation stillage as renewable energy sources.
Forest biomass energy, when utilized responsibly, presents a carbon-neutral and viable alternative to fossil fuels for energy storage. This research investigates the energy potential of various coniferous species, focusing on their complex chemical compositions and suitability for energy production. Key characteristics such as moisture content, volatile matter, ash content, and fixed carbon were analyzed, along with elemental composition (including nitrogen, carbon, oxygen, and hydrogen) and both gross and net heating values across different species. The proximate analysis revealed significant interspecies variations. For example, Pseudotsuga menziesii and Chamaecyparis lawsoniana exhibited the lowest moisture contents. Elemental analyses showed a broad range of values, with Larix decidua having the lowest nitrogen content and Sequoiadendron giganteum the highest carbon content. Gross and net heating values also varied considerably, with Podocarpus macrophyllus showing the lowest values and Pinus strobus the highest. Principal component analysis (PCA) was employed to identify underlying patterns, revealing correlations between the analyzed variables and the energy potential of the species. Additionally, PCA combined with cluster analysis allowed for the identification of coherent groups of species with similar characteristics. Overall, these findings highlight the diverse energy valorization potential inherent in coniferous species, underscoring the importance of considering specific chemical compositions for efficient energy production. The insights provided here are valuable for selecting coniferous species for energy valorization, emphasizing the need to consider both chemical composition and calorific potential.
The growing demand for sustainable and environment-friendly energy sources resulted in extensive research in the field of renewable energy. Biomass, derived from organic materials such as agricultural waste, forestry products, and wastewater treatment plant (WWTP) sludge, holds great potential as a renewable energy resource that can reduce greenhouse gas emissions and offer sustainable solutions for energy production. This study focused on diverse biomass materials, including sludge from WWTPs, forest biomass, swine waste, cork powder, and biochar. Chemical and physicochemical characterizations were performed to understand their energy potential, highlighting their elemental composition, proximate analysis, and calorific values. Results showed that different biomasses have varying energy content, with biochar and cork powder emerging as high-energy materials with net heating values of 32.56 MJ/kg and 25.73 MJ/kg, respectively. WWTP sludge also demonstrated considerable potential with net heating values of around 14.87 MJ/kg to 17.44 MJ/kg. The relationships between biomass compositions and their heating values were explored, indicating the significance of low nitrogen and sulphur content and favourable carbon, hydrogen, and moisture balances for energy production. Additionally, this study looked into the possibility of mixing different biomasses to optimize their use and overcome limitations like high ash and moisture contents. Mixtures, such as “75% Santo Emilião WWTP Sludge + 25% Biochar,” showed impressive net heating values of approximately 21.032 MJ/kg and demonstrated reduced emissions during combustion. The study’s findings contribute to renewable energy research, offering insights into efficient and sustainable energy production processes and emphasizing the environmental benefits of biomass energy sources with low nitrogen and sulphur content.