On 1 June 2022, a magnitude 6.1 earthquake struck the southern segment of the Longmenshan fault zone on the eastern edge of the Tibetan Plateau, once again causing casualties and economic losses. Understanding the deep-seated dynamic mechanisms that lead to seismic events in the Lushan earthquake area and assessing the potential hazards in seismic gap areas are of significant importance. In this study, we utilized 118 magnetotelluric datasets collected from the Lushan earthquake area and employed three-dimensional electromagnetic inversion with topographic considerations to characterize the deep-seated three-dimensional resistivity structure of the Lushan earthquake area. The results reveal that the Shuangshi–Dachuan fault in the Lushan earthquake area can be divided into two relatively low-resistivity zones: a western zone dipping southeastward and an eastern zone with a steeper slightly northwestern dip. These two zones intersect at a depth of approximately 20 km, forming an extensional pattern resembling a “Y” shape. The epicenters of both the 2013 and 2022 Lushan earthquakes are primarily located in the upper constricted portion of the pocket-like low-resistivity body at depth. The distribution of seismic aftershocks is confined within the region enclosed by the high-resistivity body, following the pattern of the Y-shaped low-resistivity zone.

The Shanxi Graben System exhibits high seismic activity and significant destructive potential. Previous studies in this region have primarily focused on geological methods such as seismology, geological surveys, and trench excavations, with limited research in the field of geophysics. In this study, we collected two magnetotelluric profiles crossing the central segment of the Shanxi Graben System, including the fault system and the Hongdong–Linfen seismic zone. Through qualitative analysis and inversion calculations, we constructed a three-dimensional electrical model of the study area. The seismogenic environment was studied by integrating the deformation field, recent seismic geological data, and geophysical survey results of the study area and its surroundings. The Luoyunshan Piedmont Fault and the Huoshan Piedmont Fault are likely two main faults in the central segment of the Shanxi Graben System. These faults span the entire crustal scale and serve as basement faults separating the Ordos Block and the Taihangshan Block. They exhibit patterns of activity. The western side of the Shanxi Graben System, represented by the Ordos Block, exhibits a stable tectonic environment, while the eastern side, represented by the Taihangshan Block, experiences severe lithospheric destruction and thinning. The results of the magnetotelluric (MT) survey support the 1303 Hongdong earthquake as an event that occurred on the Huoshan Piedmont Fault and provide geophysical evidence for the possible dominance of the Luoyunshan Piedmont Fault in the 1695 Linfen earthquake. Multiple factors controlled the seismogenic environments of these two earthquakes. The continuous upwelling of asthenospheric material in the lower-middle crust on the eastern side of the Linfen Basin possibly leads to the regional extension of the North China Block. This, in turn, triggers inclined sliding along the Huoshan Piedmont Fault and the Luoyunshan Piedmont Fault, which may be the main controlling factors for major earthquakes in the region.

Over the past few years, there has been a noticeable change in the occurrence of seismic disasters in Sichuan, China. The focus has shifted from Western Sichuan to the previously more stable Southeastern Sichuan. The recent Ms6.0 earthquake in Luxian, Southeastern Sichuan, on 16 September 2021, has once again captured the interest of scholars, who are closely examining the seismogenic environment and potential seismic hazards in the region. We conducted a magnetotelluric (MT) array survey in the Luxian earthquake area to explore the deep seismogenic environment of the 2021 Luxian Ms6.0 earthquake zone and understand the potential effects of industrial extraction on seismic activities. Here are the insights we obtained: Underneath the anticline in the Luxian Ms6.0 earthquake area, there is a structure that mainly exhibits high resistance. On the other hand, beneath the syncline, a structure with medium to low resistance is observed. The epicenter of the mainshock was identified near the intersection of high- and low-resistance media within the Fuji syncline area. Smaller aftershocks that followed the mainshock were mainly concentrated in the low-resistance layers at depths of 3–5 km in the Fuji syncline area. MT survey results have confirmed the existence of a detachment zone in the shallow crust near the epicenter of the Luxian Ms6.0 earthquake. It is believed that this detachment layer played a significant role in the seismogenic process of the Luxian Ms6.0 earthquake. During different stress conditions, this layer became active and caused the compression and faulting of a hidden fault below, resulting in the Luxian Ms6.0 earthquake. After the main earthquake, a series of smaller aftershocks with varying focal mechanisms occurred as the stress fields continued to release. It is important to note that the Luxian Ms6.0 earthquake highlights the ongoing high stress levels in the southern region of the Sichuan Basin. This emphasizes the need for continued monitoring and consideration of potential seismic hazards in the southern Sichuan area.

The Qinzhou fold belt, situated at the contact zone between the Yangtze and Cathaysia blocks in South China, was affected by the 1936 Lingshan M6¾ earthquake and the 1958 Lingshan M5¾ earthquake, both of which occurred within the conjugate structure. Understanding the deep seismogenic setting and causal mechanism of the Lingshan conjugate earthquake is of great significance for assessing the seismic disaster risk in the region. In this study, we utilized 237 magnetotelluric datasets and employed three-dimensional electromagnetic inversion to characterize the deep-seated three-dimensional resistivity structure of the Qinzhou fold belt and the Lingshan seismic zone. The results reveal that: (1) The NE-trending faults within the Qinzhou fold belt and adjacent areas are classified as trans-crustal faults. The faults exhibit crust-mantle ductile shear zones in their deeper sections, which are essential in governing regional tectonic deformation and seismic activity; (2) The electrical structure of the Qinzhou fold belt is in line with the tectonic characteristics of a composite orogenic belt, having experienced several phases of tectonic modification. The southeastern region is being influenced by mantle-derived magmatic activities originating from the Leiqiong area over a significant distance; (3) In the Lingshan seismic zone, the NE-trending Fangcheng-Lingshan fault is a trans-crustal fault and the NW-trending Zhaixu fault is an intra-crustal fault. The electrical structure pattern “two low, one high” in the zone has a significant impact on the deep tectonic framework of the area and influences the deformation behavior of shallow faults; and (4) The seismogenic structure of the 1936 Lingshan M6¾ earthquake was the Fangcheng-Lingshan fault. The earthquake’s genesis was influenced by the coupling effect of tectonic stress and deep thermal dynamics. The seismogenic structure of the 1958 Lingshan M5¾ earthquake was the Zhaixu fault. The earthquake’s genesis was influenced by tectonic stress and static stress triggering from the 1936 Lingshan M6¾ earthquake. The conjugate rupture mode in the Lingshan seismic zone is influenced by various factors, including differences in physical properties, rheology of deep materials, and the scale and depth of fault development.

On 4 February 1975, the Haicheng Ms 7.3 earthquake occurred in the Liaodong Uplift, northeastern China. To investigate its seismogenic structure and deep geological environment, we acquired broadband magnetotelluric data along two intersecting profiles across the epicentral region and performed three-dimensional inversion. Two orthogonal electrical sections were then extracted from the resulting 3D resistivity model to image the crustal structure beneath the Haicheng earthquake area. The model reveals that the northern segment of the Tanlu fault corresponds to a major electrical discontinuity between the Xialiaohe Basin and the Liaodong Uplift, suggesting that it may represent a deep-seated fault zone extending into the lithosphere. Beneath the Liaodong Uplift, a prominent mid-crustal low-resistivity layer is developed, and a synform conductive body is resolved beneath the source region. The Haicheng mainshock and relocated aftershocks are mainly distributed along the interface between this conductive body and the overlying high-resistivity upper crust. In addition, the Haichenghe–Dayanghe fault is imaged as a conductive zone that connects the mid-crustal conductor with shallower crustal levels. These electrical features suggest that deep crustal fluids, possibly related to Pacific Plate subduction and craton destruction, may have migrated upward along fault zones, weakened the seismogenic fault system, and promoted earthquake nucleation. Compared with the volcanic regions of the Jilin–Heilongjiang orogenic belt, where conductive anomalies extend into the upper mantle, the Haicheng region is characterized mainly by intracrustal conductors. This contrast highlights the role of crustal-scale conductive structures in the seismogenic environment of the Haicheng earthquake and provides geophysical constraints for comparing earthquake- and volcano-related deep processes in northeastern China.