A reflective fiber-optic sensor was created to realize on-line nondestructive monitoring of the growth process of Aspergillus on the surface of cultural paper relics. The sensor consisted of one tapered input and six output optical fibers. The operating principle of the device was established. The sensitivity of the sensor was checked. Sensors were used to monitor the growth of Aspergillus niger, Aspergillus flavus, and Aspergillus tamarrii on the papers. The morphology of Aspergillus was characterized. The sensor reveals a linear relationship between the output signal of the sensor and the thickness of Aspergillus biofilm with a detection limit of 10 µm.
Hydrogels, characterized by their high water content, tunable mechanical properties, and excellent biocompatibility, have emerged as a promising material platform for the preservation of cultural heritage. Their unique physicochemical features enable non-invasive and adaptable solutions for environmental regulation, structural stabilization, and antifungal protection. This review provides a comprehensive overview of recent progress in hydrogel-based strategies specifically developed for the conservation of cultural relics, with a particular focus on antifungal performance—an essential factor in preventing biodeterioration. Current hydrogel systems, composed of natural or synthetic polymer networks integrated with antifungal agents, demonstrate the ability to suppress fungal growth, regulate humidity, alleviate mechanical stress, and ensure minimal damage to artifacts during application. This review also highlights future research directions, such as the application prospects of novel materials, including stimuli-responsive hydrogels and self-dissolving hydrogels. As an early exploration of the use of hydrogels in antifungal protection and broader cultural heritage conservation, this work is expected to promote the wider application of this emerging technology, contributing to the effective preservation and long-term transmission of cultural heritage worldwide.
In this paper, the inhibitory effect of various nanomaterials on the growth of Aspergillus niger was studied. Among them, copper nanorods had the most obvious inhibitory effect on the growth of Aspergillus niger. The phase of copper nanorods was modified by chitosan, and its inhibitory effect on the expansion of Aspergillus niger was measured. 1. Preparation of copper nanorods and chitosan@copper nanorods: Copper nanorods with a diameter of about 300–350 nm and a length of about 100–800 nm were prepared by the liquid-phase reduction method. The chitosan solution was prepared by using the characteristics of chitosan dissolved in dilute acid to prepare chitosan@copper nanorods and modify the phase of copper nanorods. 2. Determination of the inhibitory effect of various copper nanomaterials on the growth of Aspergillus niger, including Cuprous Oxide nanoparticles, copper nanorods, nano copper oxide, and copper hydroxide, which have certain inhibitory effects on the growth of Aspergillus niger. Among them, copper nanorods have a better effect. On this basis, chitosan@copper nanorods are obtained by modifying the phase of copper nanorods with chitosan. The measured antibacterial effect is that the EC50 value is 344 mg/L.
1 September 2021 in Journal of Physics: Conference Series
Paper artifacts are contaminated by external factors in the process of preservation such as foxing. For the problem of backward technology of rapid detection of foxing on paper artifacts, a method based on hyperspectral imaging technology is proposed to detect foxing spots on paper artifacts. After selecting the region of interest and obtaining the corresponding average reflectance, the difference in the average reflectance is found after comparing the healthy regions with the diseased regions. Using band operation and minimum noise fraction to observe the characteristics of foxing image, although there is overlap in different parts, the distribution distinction between moldy and healthy regions is obvious; K-nearest neighbor method and BP neural network are applied to establish the spectral discrimination model of paper artifacts with foxing spots, and the overall discrimination rate of the two methods is 73.3% and 85%, respectively. The results show that hyperspectral imaging can be used for the identification of foxing spots, but the distinction between different parts is not good, and the discrimination effect still needs to be improved.
Polychrome pottery, as an ancient art form, embodies profound historical and cultural significance. This study focuses on a polychrome pottery lid unearthed from Zhaojiazui, Yunyang, using hyperspectral imaging for feature enhancement. Hyperspectral data from the visible to near-infrared range enables non-destructive analysis of fine surface details. A multilevel feature extraction method is proposed by combining Principal Component Analysis (PCA) and Sequential Maximum Angle Convex Cone (SMACC). PCA first identifies the principal component with the highest contribution, which is then inversely transformed to reconstruct a true-color image. SMACC is applied to extract endmembers, and HSV conversion is performed to enhance features. The final fusion of enhanced images results in improved visual clarity and detail, especially in blurred areas.