Structural health monitoring (SHM) and the operational condition assessment of blades are greatly important for the operation of wind turbines that are at a high risk of disease in service for more than 5 years. Since certain types of blade faults only occur during wind turbine operation, it is more significant to perform in situ SHM of rotating full-scale blades than existing SHM of small-scale blades or static testing of full-scale blades. Considering that these blades are usually not prefabricated with relevant sensors, this study performed SHM and condition assessment of full-scale blades in operation with stereo digital image correlation. A self-calibration method adapted to the outdoors with a large field of view was introduced based on the speckled patterns. To accurately obtain the in- and off-plane deformation, a new reference frame is constructed at the center of the rotation of the blades. The 3D displacements of the points of interest (POIs) on the blade of a 2 MW wind turbine were characterized. Furthermore, the frequency spectrum of the measured 3D displacements of the blades was compared with the blades with the faults. The results showed that the introduced technique is a convenient and nondestructive technique that enables SHM of full-scale wind turbine blades in operation.
The work performance of stereo digital image correlation (stereo-DIC) technologies, especially the operating accuracy and reliability in field applications, is not fully understood. In this study, the key technologies of the field remote 3D displacement sensing of civil structures based on stereo-DIC have been proposed. An image correlation algorithm is incorporated in improving the matching accuracy of control points. An adaptive stereo-DIC extrinsic parameter calibration method is developed by fusing epipolar-geometry-based and homography-based methods. Furthermore, a reliable reference frame that does not require artificial markers is established based on Euclidean transformation, which facilitates in-plane and out-of-plane displacement monitoring for civil structures. Moreover, a camera motion correction is introduced by considering background points according to the camera motion model. With an experiment, the feasibility and accuracy of the proposed system are validated. Moreover, the system is applied to sense the dynamic operating displacement of a 2 MW wind turbine’s blades. The results show the potential capability of the proposed stereo-DIC system in remote capturing the full-field 3D dynamic responses and health status of large-scale structures.