The Mann-Kendall (MK) statistical test has been widely applied in the trend detection of the hydrometeorological time series. Previous studies have mainly focused on the null hypothesis of “no trend” or the “Type I Error.” However, few studies address the capability of the MK test to successfully recognize the trends. In some cases, especially when the trend test is jointly applied with hydropower station design, flood risk assessment, and water quality evaluation, the “Type II error” is equally important and should not be neglected. To cope with this problem, we carry out Monte Carlo simulations and the results indicate that in addition to the significance level and the sample length, the MK test power has a close relationship with the sample variance and the magnitude of the trend. For a given time series with fixed length, the power of the MK test increases as the slope increases and declines with increasing sample variance. A deterministic relationship between the slope and the standard deviation of the white noise that can be used for evaluating the power of the MK test has also been detected. Furthermore, we find that a positive autocorrelation contained in the time series will increase both the Type I and the Type II errors due to the enlargement of the variance in the MK statistics. Finally, we recommend that researchers slightly increase the significance level and lengthen the time series sample to improve the power of the MK test in future studies.

Flood simulation and forecasting in various types of watersheds is a hot issue in hydrology. Conceptual hydrological models have been widely applied to flood forecasting for decades. With the development of economy, modern China faces with severe flood disasters in all types of watersheds include humid, semi-humid semi-arid and arid watersheds. However, conceptual model-based flood forecasting in semi-humid semi-arid and arid regions is still challenging. To investigate the applicability of conceptual hydrological models for flood forecasting in the above mentioned regions, three typical conceptual models, include Xinanjiang (XAJ), mix runoff generation (MIX) and northern Shannxi (NS), are applied to 3 humid, 3 semi-humid semi-arid, and 3 arid watersheds. The rainfall-runoff data of the 9 watersheds are analyzed based on statistical analysis and information theory, and the model performances are compared and analyzed based on boxplots and scatter plots. It is observed the complexity of drier watershed data is higher than that of the wetter watersheds. This indicates the flood forecasting is harder in drier watersheds. Simulation results indicate all models perform satisfactorily in humid watersheds and only NS model is applicable in arid watersheds. Model with consideration of saturation excess runoff generation (XAJ and MIX) perform better than the infiltration excess-based NS model in semi-humid semi-arid watersheds. It is concluded more accurate mix runoff generation theory, more stable and efficient numerical solution of infiltration equation and rainfall data with higher spatial-temporal resolution are main obstacles for conceptual model-based flood simulation and forecasting.

Across the globe, flood control standards for reservoir engineering appear different due to various deciding factors such as flood features, society, economy, culture, morality, politics, and technology resources, etc. This study introduces an in-depth comparison of flood control standards for reservoir engineering for different countries. After the comparison and analysis, it is concluded that the determination of flood control standards is related to engineering grade, dam type, dam height, and the hazard to downstream after dam-breaking, etc. Each country should adopt practical flood control standards according to the characteristics of local reservoir engineering. The constitutive flood control standards should retain certain flexibility in the basis of constraint force. This review could offer a reference for developing countries in the enactment of flood control standards for reservoir engineering.

The coupled routing and excess storage (CREST) distributed hydrological model has been applied regionally and globally for years. With the development of remote sensing, requirements for data assimilation and integration have become new challenges for the CREST model. In this paper, an improved CREST model version 3.0 (Tsinghua University and China Institute of Water Resources and Hydropower Research, Beijing, China) is proposed to enable the use of remotely-sensed data and to further improve model performance. Version 3.0 model’s runoff generation, soil moisture, and evapotranspiration based on three soil layers to make the CREST model friendly to remote sensing products such as soil moisture. A free water reservoir-based module which separates three runoff components and a four mechanism-based cell-to-cell routing module are also developed. Traditional CREST and CREST 3.0 are applied in the Ganjiang River basin, China to compare their simulation capability and applicability. Research results indicate that CREST 3.0 outperforms the traditional model and has good application prospects in data assimilation, flood forecasting, and water resources planning and management applications.

For the purpose of improving the scientific nature, reliability, and accuracy of flood forecasting, it is an effective and practical way to construct a flood forecasting scheme and carry out real-time forecasting with consideration of different rain patterns. The technique for rain pattern classification is of great significance in the above-mentioned technical roadmap. With the rapid development of artificial intelligence technologies such as machine learning, it is possible and necessary to apply these new methods to assist rain classification applications. In this research, multiple machine learning methods were adopted to study the time-history distribution characteristics and conduct rain pattern classification from observed rainfall time series data. Firstly, the hourly rainfall data between 2003 and 2021 of 37 rain gauge stations in the Pi River Basin were collected to classify rain patterns based on the universally acknowledged dynamic time warping (DTW) algorithm, and the classifications were treated as the benchmark result. After that, four other machine learning methods, including the Decision Tree (DT), Long- and Short-Term Memory (LSTM) neural network, Light Gradient Boosting Machine (LightGBM), and Support Vector Machine (SVM), were specifically selected to establish classification models and the model performances were compared. By adjusting the sampling size, the influence of different sizes on the classification was analyzed. Intercomparison results indicated that LightGBM achieved the highest accuracy and the fastest training speed, the accuracy and F₁ score were 98.95% and 98.58%, respectively, and the loss function and accuracy converged quickly after only 20 iterations. LSTM and SVM have satisfactory accuracy but relatively low training efficiency, and DT has fast classification speed but relatively low accuracy. With the increase in the sampling size, classification results became stable and more accurate. Besides the higher accuracy, the training efficiency of the four methods was also improved.

Flood control risk is one of the main risks affecting the safe operation of large-scale water transfer projects. Systematically identifying the flood control risk in the project and carrying out risk classification and hierarchical management are problems for project managers. Based on the theory of system and risk assessment, this paper starts with the various risk sources and risk events involved in the whole process of the flood disaster chain, the risk of flood disaster factors, the exposure of the disaster-bearing body, and the vulnerability of the disaster-originating environment are combined. Then, we systematically and comprehensively identify the flood control risks of a large-scale water transfer project, which are divided into four types of risk elements: rainfall–runoff; confluence and flow capacity; the geological characteristics of canal section; economic and social layouts. Specific risk factors are identified for each type of risk element, and a flood control risk evaluation index system for a water transfer project is proposed. According to the framework of the analytic hierarchy process (AHP), a quantitative assessment of comprehensive flood control for water transfer projects is carried out. Taking the middle route of the South-to-North Water Transfer Project in China as an example, this paper evaluates the integrated flood control risks of 39 engineering units, identifies six units with higher risk levels, analyzes the causes, and suggests engineering and non-engineering countermeasures to prevent and reduce the occurrence of risk accidents. This method is not only used for comprehensive flood control risk assessment and risk management in the operation and management stage of the large-scale inter-basin water transfer project, but also has a reference value in considering the optimal layout of the project water transmission line from the perspective of flood control in the planning and design stage.