Yatao Peng

Dr. Yatao Peng


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 October 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
爱胡爱珍 胡
爱珍 胡
Yongqing LengYongqing Leng
Yongqing Leng
XQXin Qiu
Xin Qiu
TLTongyao Luan
Tongyao Luan
Yatao PengYatao Peng
Yatao Peng
With the increase in applications of the millimeter wave spectrum for phased array radar systems, mobile 7–13 communication systems, and satellite systems, the demand for a wideband, high-efficiency, high-power monolithic microwave integrated circuit (MMIC) power amplifier (PA) is increasing. In this paper, a 7–13 GHz 10 W high-efficiency MMIC PA is designed. This amplifier consists of a two-stage circuit structure with two high electron mobility transistor (HEMT) cells for the driver stage and four HEMT cells for the power stage. To ensure high efficiency and a certain output power (Pout), both the driver–stage and power–stage transistors use a deep Class–AB bias. At the same time, in order to further improve the efficiency, low-loss and second–harmonic tuning techniques are used in the output and inter-stage matching networks, respectively. Finally, the electromagnetic simulation results show that within a frequency of 7–13 GHz, the amplifier achieves an average saturated continuous wave (CW) Pout of 40 dBm, a small signal gain of 14.5–15.5 dB, a power-added efficiency (PAE) of 30–46%, and the input and output return loss are better than 5 dB and 8 dB, respectively.

1 November 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
TLTongyao Luan
Tongyao Luan
Yongqing LengYongqing Leng
Yongqing Leng
XQXin Qiu
Xin Qiu
XCXingli Cui
Xingli Cui
爱胡爱珍 胡
爱珍 胡
Yatao PengYatao Peng
Yatao Peng
In this paper, an ultra-wideband (UWB) power amplifier (PA) on a 0.25 μm gallium-nitride (GaN) on silicon carbide (SiC) high-electron-mobility transistor (HEMT) process, operating in Ku-band, is presented. The broadband PA design is based on the four-stage non-uniform distributed amplifier structure. In order to improve the efficiency of the PA, a harmonic suppression network is added at the output of the drain artificial transmission line. At the same time, a capacitor is connected in series at the input of the gate, which is used to compensate for the phase offset of the gate and increase the cut-off frequency of the PA. The final gate width of the first stage is 0.56 μm, and the other three-stage gate widths are all 0.32 μm. Over the frequency range of 2–16 GHz, the simulated results of this NDPA exhibit a power-added efficiency (PAE) of 16.6–27%, a saturated continuous wave (CW) output power of 35–37 dBm, a small signal gain of 9.1–11.6 dB, and output return losses of 5–15 dB.