Classifiers based on machine learning algorithms trained through hybrid strategies have been proposed for structural health monitoring (SHM) of bridges. Hybrid strategies use numerical and monitoring data together to improve the learning process of the algorithms. The numerical models, such as finite-element (FE) models, are used for data augmentation based on the assumption of the existence of limited experimental data sets. However, a numerical model might fail in providing reliable data, as its parameters might not share the same underlying operating conditions observed in real situations. Meanwhile, the concept of transfer learning has evolved in SHM, in particular through domain adaptation techniques. The ability to adapt a classifier built on a well-known labeled data set to a new scenario with an unlabeled data set is an opportunity to transit bridge SHM from research to practice. Therefore, this paper proposes an unsupervised transfer learning approach for bridges with a domain adaptation technique, where classifiers are trained only with labeled data generated from FE models (source domain). Then, unlabeled monitoring data (target domain) are used to test the classification performance. As numerical and monitoring data are related to the same bridge, both domains are assumed to have similar statistical distributions, with slight differences caused by the uncertainties inherent to the FE models. The domain adaptation is performed using a transfer knowledge method called transfer component analysis, which transforms damage-sensitive features from the original space to a new one, called latent space, where the differences between feature distributions are reduced. This approach may increase the use of numerical modeling for long-term monitoring, as it overcomes some of the limitations imposed by the calibration process of FE models. The efficiency of this unsupervised approach is illustrated through the classification performance of classifiers built on source data with and without domain adaptation, and using the benchmark data sets from the Z-24 Bridge as the target data.
16 September 2023 in Mechanical Systems and Signal Processing
Structural health monitoring (SHM) is related to the ability of monitoring the state and deciding the level of damage or deterioration within aerospace, civil and mechanical systems. In this sense, this paper deals with the application of a two-step auto-regressive and auto-regressive with exogenous inputs (AR-ARX) model for linear prediction of damage diagnosis in structural systems. This damage detection algorithm is based on the monitoring of residual error as damage-sensitive indexes, obtained through vibration response measurements. In complex structures there are many positions under observation and a large amount of data to be handed, making difficult the visualization of the signals. This paper also investigates data compression by using principal component analysis. In order to establish a threshold value, a fuzzy c-means clustering is taken to quantify the damage-sensitive index in an unsupervised learning mode. Tests are made in a benchmark problem, as proposed by IASC-ASCE with different damage patterns. The diagnosis that was obtained showed high correlation with the actual integrity state of the structure.
21 October 2020 in Journal of Vibration and Control
After detecting initial delamination damage in a hotspot region of a composite structure monitored through a data-driven approach, the user needs to decide if there is an imminent structural failure or if the system can be kept in operation under monitoring to track the damage progression and its impact on the structural safety condition. Therefore, this study proposes delamination area quantification by stochastically interpolating global damage indices based on Gaussian process regression and taking into account uncertainty. Auto-regressive models are applied to extract damage-sensitive features from Lamb wave signals, and the Mahalanobis squared distance is used to compute damage indices. Two sets of laboratory tests are used to demonstrate the effectiveness of this methodology—one in carbon–epoxy laminate with simulated damage under temperature changes to show the general steps of the procedure, and a second test involving a set of carbon fiber–reinforced polymer coupons with actual delamination caused by repeated fatigue loads. Various levels of progression damage, measured by the covered area of delamination, are monitored using piezoelectric lead zirconate titanate patches bonded to the structural surfaces of these setups. The Gaussian process regression proved to be capable of accommodating the uncertainties to relate the damage indices versus the damaged area. The results exhibit a smooth and adequate prediction of the damaged area for both simulated damage and actual delamination.