Transparent conducting electrodes (TCEs) have played a pivotal role in driving the continuous development of optoelectronics technologies, which include organic optoelectronic applications. In recent years, there has been huge interest in designing innovative TCEs to replace the conventional indium tin oxide (ITO) electrodes, which suffer from complex fabrication issues and are incompatible with flexible, wearable electronic devices. In this regard, TCEs based on metal meshes are considered to be the best candidates because of their inherently high electrical conductivity, optical transparency, mechanical robustness and, more importantly, cost-competitiveness. In this review, we describe the technology developments of metal mesh-based transparent conductors and their applications in organic optoelectronic devices, including organic and perovskite solar cells, organic light emitting diodes, supercapacitors, electrochromic devices etc. Specifically, we discuss the fundamental features, optoelectronic properties, fabrication techniques and device applications of metal mesh TCEs. We also highlight the important criteria for evaluating the performance of metal mesh electrodes and propose some new research directions in this emerging field.

An electric field assisted spray deposition method is employed for improving the perovskite film morphology, crystallinity, and surface coverage, and for further fabricating an efficient solar cell. By applying different voltages ranging from 0.5 to 2.0 kV during spray deposition, we observed a large variation in the film morphology and surface coverage compared to those fabricated without an electric field, which is due to improved atomization from the Coulomb fission process. The optimized applied voltage of 1.5 kV during spraying led to completion of the reaction between CH₃NH₃I and PbI₂ on a hot substrate for pure phase CH₃NH₃PbI₃ thin film formation with improved grain growth and surface coverage. The cells fabricated using perovskite films showed clear applied voltage dependence in the energy conversion process and alleviation in J–V hysteresis; with 1.5 kV applied voltage the average cell efficiency of 8.9% was obtained compared to films fabricated without applying voltage providing only 6.5%. The best efficiencies are 10.9% and 7.37% for applied voltages of 1.5 kV and 0 kV, respectively. The enhancement in efficiency with applied voltage is due to the formation of more uniform and dense films with large perovskite crystals, which resulted in efficient electron transportation (enhanced photocurrent and modified series and shunt resistances) by minimizing the charge carrier recombination at grain boundaries (resulting in enhanced open circuit voltage). With further optimization of the perovskite film thickness by adjusting the CH₃NH₃I spray volume, the average cell efficiency of ∼11.0% was obtained.

Hollow-fiber shaped OLED with unprecedentedly high luminance efficiency and emission color tunability.