Transparent conducting electrodes (TCEs) have played a pivotal role in driving the continuous development of optoelectronics technologies, which include organic optoelectronic applications. In recent years, there has been huge interest in designing innovative TCEs to replace the conventional indium tin oxide (ITO) electrodes, which suffer from complex fabrication issues and are incompatible with flexible, wearable electronic devices. In this regard, TCEs based on metal meshes are considered to be the best candidates because of their inherently high electrical conductivity, optical transparency, mechanical robustness and, more importantly, cost-competitiveness. In this review, we describe the technology developments of metal mesh-based transparent conductors and their applications in organic optoelectronic devices, including organic and perovskite solar cells, organic light emitting diodes, supercapacitors, electrochromic devices etc. Specifically, we discuss the fundamental features, optoelectronic properties, fabrication techniques and device applications of metal mesh TCEs. We also highlight the important criteria for evaluating the performance of metal mesh electrodes and propose some new research directions in this emerging field.

The authors demonstrate that the reduction of quantum efficiency with increasing current density in phosphorescent light emitting diodes (PhOLEDs) is related to the formation of excitons in hole transporting layer based on the analysis of emission spectra and exciton formation zone. Low roll-off of efficiency in a PhOLED was achieved using dual emitting layers (D-EMLs) by confining the exciton formation near the interface between the emitting layers. The external quantum efficiency was maintained almost constant up to 22mA∕cm2 (10000cd∕m2) by adopting the D-EMLs in Ir(ppy)3 based PhOLEDs, resulting in high external quantum efficiency (ηext=13.1%) at high luminance.

Transparent electrodes have been widely used in electronic devices such as solar cells, displays and touch screens. Highly flexible transparent electrodes are especially desired for the development of next generation flexible electronic devices. Although indium tin oxide (ITO) is the most commonly used material for the fabrication of transparent electrodes, its brittleness and growing cost limit its utility for flexible electronic devices. Therefore, the need for new transparent conductive materials with superior mechanical properties is clear and urgent. Ag nanowire (AgNW) has been attracting increasing attention because of its effective combination of electrical and optical properties. However, it still suffers from several drawbacks, including large surface roughness, instability against oxidation and moisture and poor adhesion to substrates. These issues need to be addressed before wide spread use of metallic NW as transparent electrodes can be realized. In this study, we demonstrated the fabrication of a flexible transparent electrode with superior mechanical, electrical and optical properties by embedding a AgNW film into a transparent polymer matrix. This technique can produce electrodes with an ultrasmooth and extremely deformable transparent electrode that have sheet resistance and transmittance comparable to those of an ITO electrode.