Power quality has become an important issue in recent years due to the increasing use of solid-state switching devices and other nonlinear loads. These non-linear loads generate undesirable harmonics causing distortions in the current and voltage waveforms.Shunt active power filters have proven very effective to mitigate harmonics. This paper describes a hybrid fuzzy sliding-mode controller (HFSMC) for a three phase shunt active filter to enhance the power quality and improve the reactive power profile in the distribution grid.The proposed method attenuates the effect of both uncertainties and external disturbances, and eliminates the chattering phenomenon induced by classical sliding-mode control. Simulation are presented to demonstrate the effectiveness of the proposed control strategy. The results show that the proposed HFSMC control scheme is able to mitigate harmonic distortions, and provide reactive power compensation and power quality improvement.
This work is devoted to the presentation and realization of a digital control card (maximum power point tracking) which serves to improve the performance of a photovoltaic generator (GPV). This makes it possible to increase the profitability of the latter, on the one hand, and the stability of electrical networks, on the other hand. The command card has been developed using simple circuits, and tested on a system that includes a photovoltaic panel powering a resistive load under changing weather conditions. The aim of this paper is to implement three well-known MPPT algorithms (Hill-Climbing, Pertube & Observe and Incremental Conductance), using a PIC microcontroller type 16F877A.
Wydawnictwo SIGMA-NOT wydaje czasopisma fachowe informujące swoich czytelników o najnowszych osiągnięciach naukowych i nowoczesnych rozwiązaniach technicznych w Polsce i na świecie, popularyzuje problemy techniczne oraz poszerza wiedzę i kulturę techniczną.
Traditional solar trackers are designed to follow the sun’s exact position, assuming that perfect sun alignment always results in optimal energy generation. However, despite perfect alignment, external factors such as shading, dust, and wind can reduce power output in real-world conditions. To address these challenges, our novel system draws inspiration from the flocking behavior of birds, where individual entities adjust their behavior based on their energy output and the energy outputs of neighboring panels. The system uses Particle Swarm Optimization (PSO) to mimic this behavior, dynamically adjusting the solar tracker’s position to respond to varying environmental conditions. One key innovation is introducing a power threshold strategy, set between 1.5 W and 2 W, to avoid continuous tracker movement and conserve energy by minimizing unnecessary adjustments when the power difference is insignificant. The proposed system demonstrated an impressive 8% increase in energy gain and a reduction of up to 11% in energy consumption compared to the traditional continuous tracker. The tracking accuracy improved by 84%, with the mean tracking error reduced in the range of 0.78° to 1.09°. The system also captured 17.4% more solar irradiance, showcasing its superior efficiency. Despite environmental challenges such as dust and shading, the proposed system consistently outperformed the traditional tracker regarding energy savings and overall performance, offering a more resilient and energy-efficient solution for solar energy generation.