Traditional solar trackers are designed to follow the sun’s exact position, assuming that perfect sun alignment always results in optimal energy generation. However, despite perfect alignment, external factors such as shading, dust, and wind can reduce power output in real-world conditions. To address these challenges, our novel system draws inspiration from the flocking behavior of birds, where individual entities adjust their behavior based on their energy output and the energy outputs of neighboring panels. The system uses Particle Swarm Optimization (PSO) to mimic this behavior, dynamically adjusting the solar tracker’s position to respond to varying environmental conditions. One key innovation is introducing a power threshold strategy, set between 1.5 W and 2 W, to avoid continuous tracker movement and conserve energy by minimizing unnecessary adjustments when the power difference is insignificant. The proposed system demonstrated an impressive 8% increase in energy gain and a reduction of up to 11% in energy consumption compared to the traditional continuous tracker. The tracking accuracy improved by 84%, with the mean tracking error reduced in the range of 0.78° to 1.09°. The system also captured 17.4% more solar irradiance, showcasing its superior efficiency. Despite environmental challenges such as dust and shading, the proposed system consistently outperformed the traditional tracker regarding energy savings and overall performance, offering a more resilient and energy-efficient solution for solar energy generation.
13 March 2024 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Over the last few years, solar trackers has gone from being a modern power technology to a major source of electricity production. Thus far, the solar tracking technology has dominated the market of solar power and renewable energy. Usually solar trackers use sensors to locate the sun's position with a high degree of accuracy; however; the biggest disadvantages of sensor based solar trackers is that they can be complex, inaccurate with the high response time and are slightly more expensive than their stationary counterpart. In that matter, the main objective of this work is to design a new, cost effective and simple solar tracker that increases the solar power efficiency without using sensors nor feedback loops. Instead, we have found a new and more accurate strategy to properly determine the position of the sun by using a tracking code that is based on countries ZIP codes. In this paper the design, simulation and testing of a high-precision and sensorless solar tracking system is carried out using sun position algorithm and astronomical equations. Results show that our tracking system can be 99.9% as accurate as a GPS based solar tracker; moreover, it can be flexible, efficient, low-cost and fitting for both large and small solar generation.
Solar tracking systems can significantly increase photovoltaic (PV) energy production; however, conventional solutions often rely on sensors, feedback control systems, and continuous actuation, increasing cost, complexity, and maintenance requirements. This study presents a fully sensorless dual‐axis solar tracking system that combines astronomical ephemerides with ZIP‐code‐based geographic localization to determine the optimal orientation of PV panels without optical, irradiance, GPS, or positioning sensors. The proposed approach employs discrete actuation to minimize mechanical movement and reduce energy consumption while maintaining high tracking accuracy. Simulation results, supported by experimental validation of the tracking mechanism, indicate that the proposed tracker increases daily energy output by approximately 56.65% compared with an equivalent fixed PV panel, while the energy consumed by the tracking mechanism represents only 1.17% of the additional energy generated. The analysis further demonstrates that tracking intervals between 1 and 2.5 h provide an effective compromise between energy production, actuator energy consumption, and mechanical wear. In addition, the system remains highly effective with tracking errors up to 12°, highlighting its robustness and suitability for low‐cost implementations. The results show that a simple open‐loop control architecture can substantially improve PV energy production with minimal hardware. The proposed sensorless tracking strategy therefore offers a practical, reliable, and cost‐effective way to improve PV system performance, particularly in remote and resource‐constrained regions.