A two-trough parabolic-shaped concentrating photovoltaic solar collector with a vertical half-size ‘phosphorus-passivated emitter rear totally diffused’ bifacial cell string receiver was designed and built for household applications, with the aim of smooth the electrical ‘duck curve’. The study consisted in testing the concentrating photovoltaic solar collector outdoors, under real weather conditions, for its daily electrical peak power and efficiency, as well as for its electrical transversal and longitudinal Incidence Angle Modifier direction. The outdoor testing measurements were conducted in a parabolic trough with low concentration coupled with a central vertical half-size ‘phosphorus-passivated emitter rear totally diffused’ bifacial cell string receiver. Furthermore, the electrical transversal Incidence Angle Modifier showed to be very delicate due to the position and outline of the receiver, which led to an electrical peak efficiency close to 10% at ±25° (i.e., for an electrical power output of around 49.3 W/m2). To validate the measured parameters, a ray-tracing software has been used, where the measured Incidence Angle Modifiers have a very good agreement with the simulated Incidence Angle Modifiers (e.g., deviation of <4%). Consequently, the concentrating solar collector met the objective of lowering the Photovoltaic cell stress and high radiation intensity, by shifting the electrical peak power at normal (e.g., at 0°) to higher incidence angles (e.g., ±25°); this aids the electrical demand peak shaving, by having the highest electrical power production displaced from the highest intensity solar radiation during the day.
Sustainable development objectives place a high priority on entrepreneurship and renewable energy. Supporting entrepreneurial activities in the renewable energy industry can provide economic growth and employment to accomplish the Sustainable Development Goals Agenda 2030. Solar water heating systems can provide clear benefits for both the environment and economic growth. There is a gap in the literature regarding the study of the factors hindering or driving the development of the solar water heating system industry. This study aims to investigate the solar water heating system industry’s challenges and attempts to define the drivers to further develop the industry. Thus, solar water heating entrepreneurship parameters can be identified. Additionally, energy savings and carbon dioxide emissions were calculated for the region to raise awareness among consumers. This study used the qualitative analysis method through semi-structured interviews with 40 business owners in Adana/Turkey. The findings showed that the industry has administrative, production, political, and economic issues; there is a need for economic support and expanding education and control mechanisms. Also, the payback period is 1.63~3.27 years for a solar water heating system and this system prevents 800.75 kg of CO2 emission. The study has implications for policy-making, practice, scientific research, and the SDGs Agenda 2030.
Photovoltaics (PV) and Solar Thermal (ST) collectors are sometimes competitors, as investment capacity, energy demand, and roof space are limited. Therefore, a ratio that quantifies the difference in annual energy output between ST and PV for different locations is useful. A market survey assessing the average price and performance both in 2013 and 2021 was conducted, showing a factor of 3 cell price decrease combined with a 20% efficiency increase, while ST showed negligible variation. Winsun simulations were conducted, and the results were plotted on the world map. Despite variations due to local climate, the ratio of energy production (ST/PV) increases at lower latitudes mainly due to (a) higher air temperature increasing ST output but decreasing the PV output; (b) solar radiation reducing ST efficiency to zero while having a minor impact on PV efficiency. The ratio was calculated for several ST operating temperatures. For latitudes lower than 66°, the ratio of a flat plate at 50 °C to a PV module ranges from 1.85 to 4.46, while the ratio between a vacuum tube at 50 °C and a PV module ranges from 3.05 to 4.76. This ratio can support the decision between installing ST or PV while combining different factors such as energy value, system complexity, and installation cost.