David Boyajian

Dr. David Boyajian


Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 October 2014 in Journal of Performance of Constructed Facilities
Verified
Journal Article
Closed access
KDKaoshan Dai
Kaoshan Dai
David BoyajianDavid Boyajian
David Boyajian
WLWanqiu Liu
Wanqiu Liu
SCShenen Chen
Shenen Chen
JSJeremy Scott
Jeremy Scott
MSMarcus Schmieder
Marcus Schmieder
In bridge engineering, laser-based measurement techniques show promise in assisting field tests due to their noncontact features. A case study of using laser-based remote sensing to help collect data during in situ testing for a bridge finite-element (FE) model validation is reported in this paper. The skewed two-span bridge in this study was constructed with nine high performance steel girders in two phases. A three-dimensional (3D) FE model of the bridge superstructure was developed based on the information provided by the design files. Various field tests were performed to validate the model: (1) light detection and ranging (LiDAR) scanning, (2) static truck load tests, and (3) laser Doppler vibrometer testing. The LiDAR scanner collected geometrical information of the actual bridge. It was also used to measure girder deflections during load testing. The fundamental frequency of the bridge vibration was obtained by using a laser Doppler vibrometer (LDV). In situ dynamic and static measurements ...

1 January 2007 in International Journal of Materials and Product Technology
Verified
Journal Article
Closed access
David BoyajianDavid Boyajian
David Boyajian
IRIndrajit Ray
Indrajit Ray
JDJulio F. Davalos
Julio F. Davalos
The fracture mechanics specimen known as the Single Contoured-Cantilever Beam (SCCB) ? an experimental approach designed to ascertain both qualitative and quantitative information about the integrity of Fibre Reinforced Polymer (FRP) laminate-to-concrete interface bonds ? has been used to assess the detrimental effects of subjecting concrete structures externally strengthened with Carbon Fibre Reinforced Polymer (CFRP) sheets to a combined thermo-chemical environment involving Freeze-Thaw (FT) cycling under a calcium chloride (CaCl

20 December 2021 in Structures
Verified
Journal Article
Open access
David BoyajianDavid Boyajian
David Boyajian
TZTadeh Zirakian
Tadeh Zirakian
CBChristof Boyajian
Christof Boyajian
SCShen-En Chen
Shen-En Chen
A study of the dry CFRP-concrete interface bond is presented. The main objective of this research endeavor is to characterize this bond as a material property, akin to that of Young's modulus or Poisson's ratio, using the novel experimental single contoured-cantilever beam (SCCB) fracture mechanics testing approach. The dry fracture results came from two categories of specimens: pristine as well as representative companion beams, the latter category of which was taken from a larger accelerated cycling study (not presented herein) that accompanied wet-dry as well as freeze-thaw weathered specimens. A statistical scheme was used to appropriately reduce and characterize the Mode I critical strain energy release rates (GIc) of the dry CFRP-concrete interface bonds. Weight and strain changes were also monitored in the specimens to verify negligible effects occurring on the bulk concrete substrate. The measured strains enabled assessments to be made relative to ACI Code provisions using both the tensile and splitting-tensile strengths of concrete as critical parameters, to further validate that there was no appreciable development of strain formed at the CFRP-concrete interface. Based on the conducted experimental study, the ranges of the GIc values are determined for these two categories of dry beams. It is found through the experimental program that the CFRP-concrete interface bond exhibits stable cracking as confirmed, both, by quantitative means, using the brittleness index, as well as through a qualitative observation of the fractured surface displaying a cohesive mode of failure. It is also shown that the experimental tensile strengths of the interface bonds are dramatically well within ACI Code strength predictions.

1 December 2008 in Mechanics Research Communications
Verified
Journal Article
Closed access
BKBenjamin T. Kennedy
Benjamin T. Kennedy
DWDavid C. Weggel
David C. Weggel
David BoyajianDavid Boyajian
David Boyajian
RSR.E. Smelser
R.E. Smelser

22 December 2013 in Journal of Structures
Verified
Journal Article
Open access
PDF file
TNT. Nicholas
T. Nicholas
David BoyajianDavid Boyajian
David Boyajian
SCS. E. Chen
S. E. Chen
AZA. Zhou
A. Zhou
The single contour cantilever beam (SCCB) test method has been developed with the intent to capture Mode I opening failures of CFRP-reinforced concrete beams. Recent development in the method explores possible shifting damage into the concrete substrate by using the International Concrete Repair Institute (ICRI) Surface Profile Level Three (SP3) as the desired CFRP bonded interface to concrete. To validate and explain the interface fracture behavior, finite element analysis using special cohesive elements has been performed. The cohesive element allows separation of the concrete substrate from the CFRP. This paper presents the simulation of laboratory test results, where failure in the substrates has been successfully reproduced. The simulation results indicate that finite element method using cohesive elements can successfully replicate Mode I critical strain energy release rate and the peak capacity of the laboratory tests and may have the potential to simulate actual applications.

20 October 2017 in Experimental Techniques
Verified
Journal Article
Closed access
PDF file
David BoyajianDavid Boyajian
David Boyajian
TZT. Zirakian
T. Zirakian