Monoclonal antibodies are increasingly dominating the market for human therapeutic and diagnostic agents. For this reason, continuous methods—such as perfusion processes—are being explored and optimized in an ongoing effort to increase product yields. Unfortunately, many established cell retention devices—such as tangential flow filtration—rely on membranes that are prone to clogging, fouling, and undesirable product retention at high cell densities. To circumvent these problems, in this work, we have developed a 3D-printed microfluidic spiral separator for cell retention, which can readily be adapted and replaced according to process conditions (i.e., a plug-and-play system) due to the fast and flexible 3D printing technique. In addition, this system was also expanded to include automatic flushing, web-based control, and notification via a cellphone application. This set-up constitutes a proof of concept that was successful at inducing a stable process operation at a viable cell concentration of 10–17 × 106 cells/mL in a hybrid mode (with alternating cell retention and cell bleed phases) while significantly reducing both shear stress and channel blockage. In addition to increasing efficiency to nearly 100%, this microfluidic device also improved production conditions by successfully separating dead cells and cell debris and increasing cell viability within the bioreactor.
This article introduces the next generation of the Gateway-Module, which is designed to simplify experimental setups and to further advance digitization. Based on the innovative work of Porr et al. in 2020, the Gateway-Module-v3 replaces the single board computer (SBC) with a Phytec i.MX 8M Plus (phycore-imx8mp) System on Module (SoM). This upgrade significantly reduces the physical size of the module to a compact 5.4 cm width, length, and height. Gateway-Module-v3 seamlessly integrates with standards such as Standard in Laboratory Automation (SiLA 2) and Open Platform Communication Unified Architecture (OPC-UA), advancing the digitization and efficiency of laboratory operations. At the center of its innovation is the tty2eth management module, which provides robust remote monitoring and maintenance using SSH and Prometheus metrics to ensure that experiments run smoothly even from remote locations. The Gateway-Module-v3 offers a wide range of connectivity options, including GPIO, USB and serial ports, making it adaptable to a variety of applications. Rigorous stress testing has confirmed its reliability and performance under demanding conditions, highlighting the suitability for both laboratory and remote scenarios. With its advanced functionality and connectivity, the Gateway-Module-v3 is ready to support researchers, advance their work, and will serve as a fundamental resource for current and future needs.
Laboratory digitalization is a complex field that includes many aspects to consider, such as device control, data management, and data evaluation. This article presents a potential laboratory digitalization process, including the use of open-source software and hardware components from laboratory equipment to data evaluation. It shows what is required and how it can be used. In this example, a SiLA-based continuous chromatography system is used as a model device to demonstrate the possible purification of GFP from crude cell lysate. The current version of the Gateway Module is a translation unit for driver protocols used for device control. It uses SiLA-based drivers within a Docker environment to communicate with the server infrastructure. The Gateway Module software was managed and rolled out with the mkbox-project. Finally, the recorded laboratory data are stored in a data management system and made available for later analysis. The article also discusses how software and hardware are maintained in the background, as well as the update strategy used.